Abstract
A study on electro-slag cast steel has been performed to assess the feasibility of its use in hot-working tools in place of traditional forged steels. In this study, some important material properties that are essential for the proper performance of hot-working tool steels have been measured. The properties of the electro-slag cast steel are compared with those of hot-working tool steels currently used in industrial practices. The use of electro-slag cast steel in specific applications has been evaluated and compared with the operational performance of currently used steels in industrial environments. The wear resistance, impact toughness, thermal fatigue resistance, and repair weldability of electro-slag cast steel have been determined. The material properties were found to be comparable to existing hot-working tool steels. The number of effective blows obtained from an industrial application test also confirms that electro-slag cast steel is a feasible material for hot-working tools.
Similar content being viewed by others
References
G. E. Dieter,Mechanical Metallurgy, McGraw-Hill, NY (1987).
L. H. Van Vlack,Elements of Materials Science and Engineering, Addison-Wesley, MA (1985).
B. E. Paton, B. I. Medovar, and G. A. Boiko,Electroslag Casting, Naukova Dumka Publishers Kiev (1980).
B. I. Medovar and G. A. Boiko,Electroslag Technology, Springer-Verlag, NY (1991).
T. K. Kim, J. S. Jang, and J. H. Hong,Met. Mater.-Int. 8, 45 (2002).
National Academy of Sciences,Electroslag Remelting and Plasma Arc Melting, Washington, DC (1976).
L. A. Norstrom,Scandinavian Journal of Metallurgy 11, 33 (1982).
S. Kalpakjian,Manufacturing Engineering and Technology, Addison-Wesley, MA (1995).
M. Collin and D. Rowcliffe,Acta mater. 48, 1655 (2000).
C. M. D. Starling and J. R. T. Branco,Thin Solid Films 308–309, 436 (1997).
D. H. Kim, J. H. Ryu, J. H. Shin, and S. Lee,J. Kor. Inst. Met. & Mater. 34, 29 (1996).
G. E. Linnert,Welding Metallurgy: Carbon and Alloy Steels, American Welding Society, Miami, FL (1994).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moon, Y.H., Kim, J.W. & Van Tyne, C.J. Feasibility of electro-slag cast steel for hot-working tools. Met. Mater. Int. 11, 169–176 (2005). https://doi.org/10.1007/BF03027462
Issue Date:
DOI: https://doi.org/10.1007/BF03027462