Abstract
Global manufacturing companies must implement manufacturing engineering with proper consideration given to the manufacturing process and resources that are appropriate for the particularities of each manufacturing site. Particularly for effective enterprise resource planning (ERP) system implementation under a global manufacturing environment, the product data management (PDM) integration for product data is one of the important keys to success. For such product data integration, engineering bill of materials (EBOM) needs to be transformed to manufacturing bill of materials (MBOM), but the MBOM transformation must be done in such a way as to fit the particularities of each manufacturing site. In this process, a methodology appropriate for integration and transformation is required. This paper proposes digital manufacturing as the key tool of data integration between PDM and ERP. Digital manufacturing, as a technology possessing the physical and logical computer modeling and simulation technique for actual manufacturing, provides the methodology for transforming EBOM to MBOM that fits the particularities of each manufacturing site, based on the process and resource models which reflect the particularities of each manufacturing site. It also provides the methodology for MBOM verification and the process and resource model integration. Using such method, the MBOM and the process and resource data, verified and appropriate for each manufacturing site, can be sent to the ERP system.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Pontrandolfo P, Okgbaa OG (1999) Global manufacturing: a review and a framework for planning in a global corporation. Int J Prod Res 37(1):1–19. doi:10.1080/002075499191887
Wiendahl HP (2006) Global manufacturing—challenges and solutions. In: Cunha PF, Maropoulos PG (eds) Digital enterprise technology: perspectives and future challenges. Springer, New York, pp 15–24
Jiao J, Zhang L, Pokharel S (2005) Process platform planning for variety coordination from design to production in mass customization manufacturing. IEEE Trans Eng Manage 54(1):112–129. doi:10.1109/TEM.2006.889071
Wu SH, Fuh JY, Nee AYC (2002) Concurrent process planning and scheduling in distributed virtual manufacturing. IIE Trans 34(1):77–89. doi:10.1080/07408170208928851
CIMdata (2005) PLM and ERP integration: business efficiency and value. http://www.cimdata.com/publications/reports_complimentary/white_papers.html. Accessed 26 October 2009
Jackson C (2007) Digital manufacturing planning: concurrent development of product and process. Aberdeen Group, http://www.aberdeen.com/summary/report/benchmark/4203-RA-digital-manufacturing-planning.asp. Accessed 28 October 2009
Zhu S, Cheng D, Xue K, Zhang X (2007) A unified bill of material based on STEP/XML. Lect Notes Comput Sci 4402:267–276. doi:10.1007/978-3-540-72863-4-28
Yang CO, Cheng MC (2003) Developing a PDM/MRP integration framework to evaluate the influence of engineering change on inventory scrap cost. Int J Adv Manuf Technol 22(3–4):161–174. doi:10.1007/s00170-002-1454-4
Yang CO, Jiang TA (2002) Developing an integration framework to support the information flow between PDM and MRP. Int J Adv Manuf Technol 19(2):131–141. doi:10.1007/s001700200006
Estublier J, Vega G (2007) Reconciling software configuration management and product data management. In: Proceedings of the 6th Joint Meeting of the European Software Engineering Conference and the ACM SIGSOFT Symposium on the Foundations of Software Engineering ESCE/FCE07, pp 265–274, doi: 10.1145/1287624.1287662
Gagné S, Fortin C (2007) Application of the CMII model to an integrated engineering and manufacturing development environment. Int J Interact Des Manuf 1(1):5–13. doi:10.1007/s12008-007-0002-8
Chryssolouris G, Mavrikios D, Papakostas N, Mourtzis D, Michalos G, Georgoulias K (2008) Digital manufacturing: history, perspectives, and outlook. J Eng Manuf 223(5):451–462. doi:10.1243/09544054JEM1241
Westkämper E (2007) Digital manufacturing in the global era. In: Cunha PF, Maropoulos PG (eds) Digital enterprise technology: perspectives and future challenges. Springer, New York, pp 3–14
Kim H, Lee JK, Park JH, Park BJ, Jang DS (2002) Applying digital manufacturing technology to ship production and the maritime environment. Integr Manuf Syst 13(5):295–305. doi:10.1108/09576060210429748
Butterfield J, Crosby S, Curran R, Price M, Armstrong CG, Raghunathan S, McAleenan D, Gibson C (2007) Optimization of aircraft fuselage assembly process using digital manufacturing. J Comput Inf Sci Eng 7(3):169–275. doi:10.1115/1.2753879
Freedman C (1999) An overview of fully integrated digital manufacturing technology. In: Proceedings of the 31st Conference on Winter Simulation: Simulation—a bridge to the future vol. 1, pp. 281–285. doi: 10.1145/324138.324228
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, C., Leem, C.S. & Hwang, I. PDM and ERP integration methodology using digital manufacturing to support global manufacturing. Int J Adv Manuf Technol 53, 399–409 (2011). https://doi.org/10.1007/s00170-010-2833-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-010-2833-x