Abstract
Instrumented spherical indentation testing is proposed as a non-destructive way to evaluate surface residual stress in soda-lime glass. 10 μm-deep indentations with a spherical indenter of 250 μm radius do not reduce the strength of 3.5-mm-thick soda-lime glass as measured in four-point bending tests. We find good linearity between the compressive surface residual stress and the force difference at maximum indentation depth in the indentation force–depth curve, while hardness as measured by instrumented spherical indentation testing is independent of compressive surface residual stress introduced by bending and strengthening heat treatment.
Similar content being viewed by others
References
Hosford WF (2010) Mechanical behavior of materials, 2nd edn. Cambridge University Press, Cambridge
ASTM C1048-el12 (2012) Standard specification for heat-strengthened and fully tempered flat glass
De Jong B, Glass H-JA, Biekert E, Davis H (1989) Ullmann’s encyclopedia of industrial chemistry. VCH Verlagsgesellschaft mbH, Weinheim
Jang JI (2009) Estimation of residual stress by instrumented indentation: a review. J Ceram Process Res 10(3):391–400
Lafontaine WR, Paszkiet CA, Korhonen MA, Li CY (1991) Residual-stress measurements of thin aluminum metallizations by continuous indentation and X-ray stress measurement techniques. J Mater Res 6(10):2084–2090
Aben H, Ainola L, Anton J (2000) Integrated photoelasticity for nondestructive residual stress measurement in glass. Opt Lasers Eng 33(1):49–64
Marshall D, Lawn B (1977) An indentation technique for measuring stresses in tempered glass surfaces. J Am Ceram Soc 60(1–2):86–87
Zeng K, Rowcliffe D (1994) Experimental measurement of residual stress field around sharp indentation in glass. J Am Ceram Soc 77(2):524–530
Bisrat Y, Roberts SG (2000) Residual stress measurement by Hertzian indentation. Mater Sci Eng A 288(2):148–153
Tandon R (2007) A technique for measuring stresses in small spatial regions using cube-corner indentation: application to tempered glass plates. J Eur Ceram Soc 27(6):2407–2414
Tandon R, Buchheit TE (2007) Use of cube-corner nano-indentation crack length measurements to estimate residual stresses over small spatial dimensions. J Am Ceram Soc 90(2):502–508
Kim JY, Kang SK, Lee JJ, Jang JI, Lee YH, Kwon D (2007) Influence of surface-roughness on indentation size effect. Acta Mater 55(10):3555–3562
Kim JY, Kang SK, Greer JR, Kwon D (2008) Evaluating plastic flow properties by characterizing indentation size effect using a sharp indenter. Acta Mater 56(14):3338–3343
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–1583
Doerner MF, Nix WD (1986) A method for interpreting the data from depth-sensing indentation instruments. J Mater Res 1(4):601–609
Ciavarella M, Hills DA (1999) The influence of the indenter tip-radius on indentation testing of brittle materials. J Eur Ceram Soc 19(2):239–245
ASTM C1499–09 (2013) Standard test methods for strength of glass by flexural strength of advanced ceramics at ambient temperature. ASTM International, West Conshohocken
Fett T, Rizzi G, Guin JP, Wiederhorn SM (2007) Ring-on-ring strength measurements on rectangular glass slides. J Mater Sci 42(1):393–395. doi:10.1007/s10853-006-1102-8
ASTM C-158-02 (2012) Standard test methods for strength of glass by flexure (determination of modulus of rupture). ASTM, West Conshohocken
Quinn GD, Morrell R (1991) Design-data for engineering ceramics—a review of the flexure test. J Am Ceram Soc 74(9):2037–2066
Cai H, Kalceff SMA, Lawn BR (1994) Deformation and fracture of mica-containing glass-ceramics in Hertzian contacts. J Mater Res 9(03):762–770
Kim JY, Lee KW, Lee JS, Kwon D (2006) Determination of tensile properties by instrumented indentation technique: representative stress and strain approach. Surf Coat Tech 201(7):4278–4283
Sines G, Carlson R (1952) Hardness measurements for determination of residual stresses. ASTM Bull 180:357
Frankel J, Abbate A, Scholz W (1993) The effect of residual stresses on hardness measurements. Exp Mech 33(2):164–168
Bai MW, Kato K, Umehara N, Miyake Y (2000) Nanoindentation and FEM study of the effect of internal stress on micro/nano mechanical property of thin CNx films. Thin Solid Films 377:138–147
Sneddon IN (1965) The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 3(1):47–57
Pharr GM, Bolshakov A (2002) Understanding nanoindentation unloading curves. J Mater Res 17(10):2660–2671
Lafontaine WR, Yost B, Li CY (1990) Effect of residual-stress and adhesion on the hardness of copper-films deposited on silicon. J Mater Res 5(4):776–783
Zagrebelny AV, Carter CB (1997) Indentation of strained silicate-glass films on alumina substrates. Scripta Mater 37(12):1869–1875
Doerner MF, Gardner DS, Nix WD (1986) Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques. J Mater Res 1(6):845–851
Tsui T, Oliver W, Pharr G (1996) Influences of stress on the measurement of mechanical properties using nanoindentation: part I. Experimental studies in an aluminum alloy. J Mater Res 11(03):752–759
Gardon R (1980) Thermal tempering of glass. Glass Sci Technol 5:145–216
Lee Y-H, Kwon D (2004) Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Mater 52(6):1555–1563
Suresh S, Giannakopoulos AE (1998) A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater 46(16):5755–5767
Acknowledgements
This work was supported by the Human Resource Training Program for Regional Innovation and Creativity through the Ministry of Education and National Research Foundation of Korea NRF-2014H1C1A1073051), and by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2014R1A1A2058799).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ahn, Sm., Park, SY., Kim, YC. et al. Surface residual stress in soda-lime glass evaluated using instrumented spherical indentation testing. J Mater Sci 50, 7752–7759 (2015). https://doi.org/10.1007/s10853-015-9345-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-015-9345-x