Abstract
The sound is the pressure disturbance created over air particles above and below atmospheric pressure. It is a mechanical wave which requires a medium to propagate. The sound can generate from a source, then travels through a medium and finally is received by the receiver. The noise is an unpleasant or unwanted sound that is undesired by the receiver. This unwanted sound is absorbed by the sound absorbing (SA) materials. This paper presents a complete comprehensive literature survey for the SA materials and organized the information in the following manner. First, the phenomenon behind SA mechanism is being explained, then the detailed information of existing SA materials with their classification is reported. After that, the factors associated with the sound absorption that influences the sound absorption coefficient (SAC) is being presented. Finally, the theoretical models for porous materials are being discussed followed by the details of price comparison of natural and synthetic fiber-based sound absorbers and the applications of SA materials of various acoustical products. There are a lot of researches going on to develop new acoustic materials and hence this paper will help the researchers to know about the existing SA materials and also help them to develop new acoustic materials by considering significant information related to sound absorption.
Similar content being viewed by others
References
J. Burg, J. Romney, E. Schwartz, Digital Sound & Music: Concepts, Applications, & Science (Franklin, Beedle & Associates Incorporated Portland, 2016)
D.R. Raichel, The Science and Applications of Acoustics, 2nd edn. (AIP Press, College Park, 2000), p. 13
S.V. Vaseghi, Advanced Digital Signal Processing and Noise Reduction, 2nd edn. (Wiley, New York, 2006), p. 29
P.A. Savale, J. Environ. Res. Dev. 8, 1026–1036 (2014)
S.N.Y. Gerges, G.A. Sehrndt, W. Parthey, Noise sources. http://www.who.int/occupational_health/publications/noise5.pdf. Accessed 16 Aug 2018
C.H. Hansen, Fundamentals of acoustics. http://www.who.int/occupational_health/publications/noise1.pdf. Accessed 16 Aug 2018
A.E. Gonzalez, What does “Noise Pollution” mean? J. Environ. Prot. 5, 340 (2014). https://doi.org/10.4236/jep.2014.54037
P.R. Puranik, R.R. Parmar, P.P. Rana, Nonwoven acoustic textiles—a review. Int. J. Adv. Res. Eng. Technol. 5(3), 81–88 (2014)
H. Memon, Z.A. Abro, A. Ahmed, N.A. Khoso, Considerations while designing acoustic home textiles: a review. J. Text. Appar. Technol. Manag. 9(3), 1–29 (2015)
F. Asdrubali, S. Schiavoni, K.V. Horoshenkov, A review of sustainable materials for acoustic applications. Build. Acoust. 19(4), 283–312 (2012)
M.R.G. Ravandi, H. Mardi, A.A.A. Langari, M. Mohammadian, N. Khanjani, A review on the acoustical properties of natural and synthetic noise absorbents. OALibJ (2015). https://doi.org/10.4236/oalib.1101598
M.N. Yahya, D.D.V.S. Chin, A review on the potential of natural fibre for sound absorption application. IOP Conf. Ser. (2017). https://doi.org/10.1088/1757-899x/226/1/012014
X. Sagartzazua, L. Hervellab, J.M. Pagaldaya, Review in sound absorbing materials. Arch. Comput. Methods Eng. 15(3), 311–342 (2007)
L. Egab, X. Wang, M. Fard, Acoustical characterisation of porous sound absorbing materials: a review. Vehic. Noise Vib. 10, 129–149 (2014)
M. Ayub, A.C. Zander, C.Q. Howard, B.S. Cazzolato, A review of acoustic absorption mechanisms of nanoscopic fibres. Proc Acoust. 1–8 (2011)
M.A. Kuczmarski, J.C. Johnston, Acoustic absorption in porous materials. Nasa/Tm—2011-216995 (2011)
H. Jie, J. Sheng, Y. Xiong, Sound absorption properties of single-hole hollow polyester fibre reinforced hydrogenated carboxyl nitrile rubber composites. AUTEX Res. J. 17, 263–267 (2016). https://doi.org/10.1515/aut-2016-0014
M.M. Jalili, S.Y. Mousavi, A.S. Pirayeshfar, Investigating the acoustical properties of carbon fibre-, glass fibre-, and hemp fibre-reinforced polyester composites. Polym. Compos. 35, 2103–2111 (2014). https://doi.org/10.1002/pc.22872
L. Chen, Z. Chen, X. Zhang, W. Wang, Sound insulation property study on nylon 66 scrim reinforced PVF laminated membranes and their composite sound proof structure. IOP Conf. Ser. (2018). https://doi.org/10.1088/1755-1315/108/2/022029
H. Liu, B. Zuo, Structure and sound absorption properties of spiral vane electrospun PVA/PEO nanofiber membranes. Appl. Sci. 8, 296 (2018). https://doi.org/10.3390/app8020296www.mdpi.com/journal/applsci
Z. Liu, J. Zhan, M. Fard, J.L. Davy, Acoustic properties of a porous polycarbonate material produced by additive manufacturing. Mater. Lett. 181, 296–299 (2016). https://doi.org/10.1016/j.matlet.2016.06.045
S. Ersoy, E. Ulug, M. Tasdemir, Sound adsorption and morphological properties of SIS/HIPS/CaCO3 polymer composites. J. Polym. Mater. 28(2), 551–560 (2011)
H.A. Latif, M.N. Yahya, M.N. Rafiq, M. Sambu, M.I. Ghazali, M.N.M. Hatta, A preliminary study on acoustical performance of oil palm mesocarp natural fibre. Appl. Mech. Mater. 773, 247–252 (2015)
V.E. Egorova, R.R. Habibova, L.N. Shafigullin, Study of sound-absorbing properties of glass-fibre reinforced materials used in engineering. IOP Conf. Seri. 701, 53–58 (2017). https://doi.org/10.1088/1757-899x/240/1/012012
M. Kumar, R. Kaur, Glass fibre reinforced rigid polyurethane foam: synthesis and characterization. Polymers 17, 517–521 (2017). https://doi.org/10.1515/epoly-2017-0072
J.H. Lin, C.H. Huang, Y.C. Chuang, C.W. Lou, Preparation and sound absorption evaluation of PET/Kevlar/PU foam composite boards. Adv. Mater. Res. 910, 222–225 (2014). https://doi.org/10.4028/www.scientific.net/AMR.910.222
A.E. Tiuc, H. Vermeşan, T. Gabor, O. Vasile, Improved sound absorption properties of polyurethane foam mixed with textile waste. Energy Proc. 85, 559–565 (2016). https://doi.org/10.1016/j.egypro.2015.12.245
R. Rey, J. Alba, J.P. Arenas, V. Sanchis, Sound absorbing materials made of recycled polyurethane foam. Inter. Noise (2011)
T. Yamashita, K. Suzuki, H. Adachi, S. Nishino, Y. Tomota, Effect of microscopic internal structure on sound absorption properties of polyurethane foam by X-ray computed tomography observations. Mater. Trans. 50, 373–380 (2009). https://doi.org/10.2320/matertrans.MRA2008207
A.E. Tiuc, O. Vasile, A.D. Usca, T. Gabor, H. Vermesan, The analysis of factors that influence the sound absorption coefficient of porous materials. RJAV. 11(2), 105–108 (2014)
W.A. Orfali, Acoustic properties of polyurethane composition reinforced with carbon nanotubes and silicon oxide nano-powder. Phys. Proc. 70, 699–702 (2015). https://doi.org/10.1016/j.phpro.2015.08.091
A. Byakova, S. Gnyloskurenko, Y. Bezimyanniy, T. Nakamura, Closed-cell aluminum foam of improved sound absorption ability: manufacture and properties. Metals 4, 445–454 (2014). https://doi.org/10.3390/met4030445
Y. Li, Z. Li, F. Han, Air flow resistance and sound absorption behavior of open-celled aluminum foams with spherical cells. Proc. Mater. Sci. 4, 197–200 (2014). https://doi.org/10.1016/j.mspro.2014.07.591
W. Fang, W. Lu-cai, W. Jian-guo, Y. Xiao-hong, Sound absorption property of open pore aluminum foams. China Foundry. 4(1), 31–33 (2007)
Y. Ren, Z. Li, F. Han, Synthesis of Co3O4 micro-needles on the cell walls and their effect on the sound absorption behavior of open cell Al foam. Proc. Mater. Sci. 4, 191–195 (2014). https://doi.org/10.1016/j.mspro.2014.07.593
T.J. Lu, F. Chen, D. He, Sound absorption of cellular metals with semiopen cells. J. Acoust. Soc. Am. 108(4), 1697–1709 (2000)
W. Jin, J. Liu, Z. Wang, Y. Wang, Z. Cao, Y. Liu, X. Zhu, Sound absorption characteristics of aluminum foams treated by plasma electrolytic oxidation. Materials 8, 7511–7518 (2015). https://doi.org/10.3390/ma8115395
P.S. Liu, H.B. Qing, H.L. Hou, Primary investigation on sound absorption performance of highly porous titanium foams. Mater. Des. 85, 275–281 (2015). https://doi.org/10.1016/j.matdes.2015.06.118
X. Zhengping, Z. Jilei, T. Huiping, A. Qingbo, Z. Hao, W. Jianyong, L. Cheng, Progress of application researches of porous fiber metals. Materials 4, 816–824 (2011). https://doi.org/10.3390/ma4040816
Z. Bo, C. Tianning, Calculation of sound absorption characteristics of porous sintered fiber metal. Appl. Acoust. 70, 337–346 (2009)
N. Lippitz, J. Rosler, B. Hinze, Potential of metal fibre felts as passive absorbers in absorption silencers. Metals 5, 150–158 (2013). https://doi.org/10.3390/met3010150
A. Qingbo, W. Jianzhong, T. Huiping, Z. Hao, M. Jun, B. Tengfei, Sound absorption characteristics and structure optimization of porous metal fibrous materials. Rare Met. Mater. Eng. 44, 2646–2650 (2015). https://doi.org/10.1016/s1875-5372(16)60011-5
W. Chen, S. Liu, L. Tong, S. Li, Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency range. Theor. Appl. Mech. Lett. 6, 42–48 (2016). https://doi.org/10.1016/j.taml.2015.12.002
Z. Jilei, S. Jun, T. Huiping, W. Jianzhong, A. Qingbo, B. Tengfei, S. Weidong, Gradient-structural optimization of metal fiber porous materials for sound absorption. Powder Technol. 301, 1235–1241 (2016)
Y. Yang, B. Li, Z. Chen, N. Sui, Z. Chen, T. Xu, Y. Li, R. Fu, Y. Jing, Sound insulation of multi-layer glass-fiber felts: Role of morphology. Text. Res. J. 87, 261–269 (2016). https://doi.org/10.1177/0040517516629142
C. Zhao, P. Wang, L. Wang, D. Liu, Reducing railway noise with porous sound-absorbing concrete slabs. Adv. Mater. Sci. Eng. 1, 1–10 (2014). https://doi.org/10.1155/2014/206549
Z.A. Krezel, K. McManus, Environmentally friendly sound absorbing noise barrier made from concrete waste—further developments. Int. J. Pavement. Res. Technol. 3, 223–227 (2010)
P. Sun, Z. Guo, Sintering preparation of porous sound-absorbing materials from steel slag. Trans. Nonferrous. Met. Soc. China 25, 2230–2240 (2015). https://doi.org/10.1016/s1003-6326(15)63865-1
M. Bratu, I. Ropota, O. Vasile, O. Dumitrescu, M. Muntean, Sound-absorbing properties of composite materials reinforced with various wastes. Environ. Eng. Manag. J. 10(8), 1047–1051 (2011)
M. Bratu, O. Dumitrescu, O. Vasile, A. Constantin, M. Muntean, Research on the sound-absorbing properties of new composite materials with some wastes. Rev. Rom. Mater. 44(2), 160–168 (2014)
U.E. Asuquo, E.O. Obisung, F.O. Faithpraise, Sound absorbing properties of different density local acoustic materials. Educ. Res. 1(2), 039–041 (2010)
E. Julia, J. Segura, A. Nadal, J.M. Gadea, J.E. Crespo, Study of sound absorption properties of multilayer panels made from ground tyre rubbers. Fascicle Manag. Technol. Eng. 1, 147–150 (2013)
X. Colom, J. Canavate, F. Carrillo, M.J. Lis, Acoustic and mechanical properties of recycled polyvinyl chloride/ground tyre rubber composites. J. Compos. Mater. 9, 1061–1069 (2014). https://doi.org/10.1177/0021998313482154
E. Knapen, R. Lanoye, G. Vermeir, W. Lauriks, D. Van Gemert, Sound absorption by polymer-modified porous cement mortars. In 6th International Conference on Materials Science and Restoration. Aedificatio Publishers (2003)
Y. Lee, C. Joo, Sound absorption properties of recycled polyester fibrous assembly absorbers. AUTEX Res. J. 3(2), 78–84 (2003)
H.S. Seddeq, N.M. Aly, A. Marwa, M.H. Elshakankery, Investigation on sound absorption properties for recycled fibrous materials. J. Ind. Text. 43, 56–73 (2012). https://doi.org/10.1177/1528083712446956
S. Djoumaliisky, Y. Ivanova, G. Kotzev, I. Borovansk, T. Tsolov, Multilayered sound absorbing panels based on waste materials In the 23rd International Conference Technomer, 14–15, Nov 2013
I. Iasnicu, O. Vasile, R. Iatan, The analysis of sound absorbing performances for composite plates containing recycled textile wastes. U.P.B. Sci. Bull. 78(1), 213–220 (2016)
M. Kucuk, Y. Korkmaz, The effect of physical parameters on sound absorption properties of natural fiber mixed nonwoven composites. Text. Res. J. 82, 2043–2053 (2012). https://doi.org/10.1177/0040517512441987
Y. Na, G. Cho, Sound absorption and viscoelastic property of acoustical automotive nonwovens and their plasma treatment. Fiber Polym. 11, 782–789 (2010). https://doi.org/10.1007/s12221-010-0782-5
B. Algaily, S. Puttajukr, T. Navarat, Acoustic absorption, rheological and mechanical characteristics of waste egg boxes fibers filled SBR. J Teknol. (2015). https://doi.org/10.11113/jt.v77.3800
X. Jiang, B. Liang, R.Q. Li, X. Zou, L. Yin, J. Cheng, Ultra-broadband absorption by acoustic metamaterials. Appl. Phys. Lett. (2014). https://doi.org/10.1063/1.4904887
V.L. Chrisler, Effect of paint on the sound absorption of acoustic materials. J. Acoust. Soc. Am. 12, 465 (1941). https://doi.org/10.1121/1.1902192
O. Doutres, N. Atalla, M. Brouillette, C. Hebert, Using shock waves to improve the sound absorbing efficiency of closed-cell foams. Appl. Acoust. 79, 110–116 (2014)
X. Zhu, B.J. Kim, Q. Wang, Q. Wu, Recent advances in the sound insulation properties of bio-based materials. Bioresources 9, 1764–1786 (2013). https://doi.org/10.15376/biores.9.1.1764-1786
C. Wassilieff, Sound absorption of wood-based materials. Appl. Acoust. 48(4), 339–356 (1996)
V. Bucur, Acoustics of wood. In the 13th International Congress on Sound and Vibration ICSV13, Vienna Austria, 2–6, July 2006
L. Peng, B. Song, J. Wang, D. Wang, Mechanic and acoustic properties of the sound-absorbing material made from natural fiber and polyester. Adv. Mater. Sci. Eng. (2015). https://doi.org/10.1155/2015/274913
J. Kudela, M. Kunstar, Physical-acoustical characteristics of maple wood with wavy structure. Ann. WULS-SGGW For. Wood Technol. 18(75), 12–18 (2011)
G. Iannace, U. Berardi, Characterization of natural fibers for sound absorption. In the 22nd International Congress on Sound and Vibration ICSV22, Florence, Italy, 12–16 July 2015
U. Berardi, G. Iannace, Acoustic characterization of natural fibers for sound absorption applications. Build. Environ. 94, 840–852 (2015). https://doi.org/10.1016/j.buildenv.2015.05.029
M.J.M. Nor, N. Jamaludin, F.M. Tamiri, A preliminary study of sound absorption using multi-layer coconut coir fibers. Electr. J. Tech. Acous. 3, 1–8 (2004)
A. Shiney, B. Premlet, Green building materials for acoustics of an auditorium—a case study. Int. J. Eng. Sci. Invent. 4(3), 70–76 (2015)
M.H. Fouladi, M. Ayub, M.J.M. Nor, Analysis of coir fiber acoustical characteristics. Appl. Acoust. 72, 35–42 (2011). https://doi.org/10.1016/j.apacoust.2010.09.007
L.Z. Ying, A. Putra, M.J.M. Nor, N. Muhammad, M.Y. Yaakob, Sound absorption of multilayer natural coir and kenaf fibers. In the 23rd International Congress on Sound and Vibration ICSV 23, Athens, Greece, 10–14 July 2016
M. Ayub, M.J.M. Nor, N. Amin, R. Zulkifli, M.H. Fouladi, A.R. Ismail, Analysis on sound absorption of natural coir fiber using Delany-Bazley model. In Proceedings of the 8th International Conference on Mechanical Engineering, Dhaka Bangladesh, 26–28 December 2009
M.H. Fouladi, S.N. Namasivayam, C.C. Hwa, P.Z. Xin, S. Yeng, P. Xin, M. Ghassem, H.S. Najafabadi, Enhancement of coir fiber fire retardant property. J. Eng. Sci. Technol. 5, 61–72 (2015)
W.O. Ogunbowale, P. Banks-Iee, K.A. Bello, S. Maiwada, E.G. Kolawole, Acoustical absorptive properties of cotton, polylactic acid batts and fabrics. Am. Int. J. Contemp. Res. 2(11), 106–114 (2012)
H. Hasani, M. Zarrebini, M. Zare, S. Hassanzadeh, Evaluating the acoustic properties of Estabragh (milkweed)/hollow-polyester nonwovens for automotive applications. J. Text. Sci. Eng. 4, 1–6 (2014). https://doi.org/10.4172/2165-8064.1000157
B. Ekici, A. Kentli, H. Kucuk, Improving sound absorption property of polyurethane foams by adding tea-leaf fibers. Arch. Acoust. 37, 515–520 (2012). https://doi.org/10.2478/v10168-012-0052-1
H. Koruk, G. Genc, Investigation of the acoustic properties of bio luffa fiber and composite materials. Mater. Lett. 157, 166–168 (2015). https://doi.org/10.1016/j.matlet.2015.05.071
G. Genc, H. Koruk, Investigation of the vibro-acoustic behaviors of luffa bio composites and assessment of their use for practical applications. In the 23rd International Congress on Sound and Vibration ICSV23, Athens, Greece, 10–14, July 2016
A.R. Mohanty, S. Fatima, Noise control using green materials. Sound Vib. 49, 13–15 (2015)
P.V. Bansod, T. Mittal, A.R. Mohanty, Study on the acoustical properties of natural jute material by theoretical and experimental methods for building acoustics applications. Acoust. Aust. 44, 457–472 (2016). https://doi.org/10.1007/s40857-016-0073-4
S. Fatima, A.R. Mohanty, Acoustical and fire-retardant properties of jute composite materials. Appl. Acoust. 72, 108–114 (2011). https://doi.org/10.1016/j.apacoust.2010.10.005
G. Thilagavathi, E. Pradeep, T. Kannaian, L. Sasikala, Development of natural fiber nonwovens for application as car interiors for noise control. J. Ind. Text. 3, 267–278 (2010). https://doi.org/10.1177/1528083709347124
D.V. Parikh, Y. Chen, L. Sun, Reducing automotive interior noise with natural fiber nonwoven floor covering systems. Text. Res. J. 76, 813–820 (2006). https://doi.org/10.1177/0040517506063393
S. Prabhakaran, V. Krishnaraj, M. Senthil kumar, R. Zitoune, Sound and vibration damping properties of flax fiber reinforced composites. Proc. Eng. 97, 573–581 (2014). https://doi.org/10.1016/j.proeng.2014.12.285
Z.Y. Lim, A. Putra, M.J.M. Nor, M.Y. Yaakob, Preliminary study on sound absorption of natural kenaf fiber. Proc. Mech. Eng. Res. Day. 95–96 (2015)
M. Sambu, M.N. Yahya, H.A. Latif, M.N.M. Hatta, M.I.B. Ghazali, Preliminary study on acoustical and physical charachteristics of kenaf (hibiscus cannabinus) using natural rubber as binder. ARPN J. Eng. Appl. Sci. 11(4), 2468–2474 (2016)
O. Kinnane, A. Reilly, J. Grimes, S. Pavia, R. Walker, Acoustic absorption of hemp-lime construction. Constr. Build. Mater. 122, 674–682 (2016). https://doi.org/10.1016/j.conbuildmat.2016.06.106
L.P. Bastos, G.D. Silva, V.D. Melo, N.S. Soeiro, Panels manufactured from vegetable fibers: an alternative approach for controlling noises in indoor environments. Adv. Acoust. Vib. (2012). https://doi.org/10.1155/2012/698737
S. Saadon, A.Z.M. Rus, Utilization of oil palm trunk (Elaeis Guineensis) as foam composite for sound absorption, J. Teknol. (2015). https://doi.org/10.11113/jt.v77.6988
A. Trematerra, M. Antonio, G. Iannace, Use of green material for acoustic correction inside rooms. J. Sustain. Archit. Civ. Eng. 3, 33–38 (2013). https://doi.org/10.5755/j01.sace.3.4
T. Koizumi, N. Tsujiuchi, A. Adachi, in High Performance Structures and Composites, ed. by C.A. Brebbia, W.P. de Wilde (WIT Press, Southampton 2002), pp. 157–166
A. Putra, F.A. Khair, M.J.M. Nor, Utilizing hollow-structured bamboo as natural sound absorber. Arch. Acoust. 40, 601–608 (2015). https://doi.org/10.1515/aoa-2015-0060
S. Mahzan, A.M. Ahmad Zaidi, M.I. Ghazali, M.N. Yahya, M. Ismail, Investigation on sound absorption of rice-husk reinforced composite. In Proceedings of MUCEET, pp. 19–22 (2009)
Y. Wang, C. Zhang, L. Ren, M. Ichchou, M. Galland, O. Bareille, Influences of rice hull in polyurethane foam on its sound absorption characteristics. Polym. Compos. 34, 1847–1855 (2013). https://doi.org/10.1002/pc.22590
A.B. Tiuc, T. Rusu, O. Vasile, Investigation composite materials for its sound absorption properties. RJAV 9(2), 123–126 (2012)
A. Tiuc, T. Rusu, S. Ionescu, M. Cretu, A. Ionescu, Acoustical materials—sound absorbing materials made of pine sawdust. RJAV VIII(2), 95–98 (2011)
S.T.M. Carvalho, L.M. Mendesa, A.A.S. Cesar, J.B. Florez, F.A. Mori, Acoustic characterization of sugarcane bagasse particleboard panels (Saccharum Officinarum L). Mater. Res. 18, 821–827 (2015). https://doi.org/10.1590/1516-1439.010515
C. Othmani, M. Taktak, A. Zein, T. Hentati, T. Elnady, T. Fakhfakh, M. Haddar, Experimental and theoretical investigation of the acoustic performance of sugarcane wastes based material. Appl. Acoust. 109, 90–96 (2016)
I. Suhawati, K. Shamsul, I. Ismaliza, A.M. Kamarudin, Sound absorption analysis of foamed rubber composites from kenaf and calcium carbonate. J. Rubber Res. 16, 36–44 (2013)
H. Mamtaz, M.H. Fouladi, M. Al-Atabi, S.N. Namasivayam, Acoustic absorption of natural fiber composites. J. Eng. 1, 1–10 (2016). https://doi.org/10.1155/2016/5836107
M. Fukuhara, Acoustic characteristics of botanical leaves using ultrasonic transmission waves. Plant Sci. 162, 521–528 (2002). https://doi.org/10.1016/S0168-9452(01)00600-8
M. Connelly, M. Hodgson, Experimental investigation of the sound absorption characteristics of vegetated roofs. Build. Environ. 92, 335–346 (2015). https://doi.org/10.1016/j.buildenv.2015.04.023
F. D’Alessandro, F. Asdrubali, N. Mencarelli, Experimental evaluation and modelling of the sound absorption properties of plants for indoor acoustic applications. Build. Environ. 91, 913–923 (2015). https://doi.org/10.1016/j.buildenv.2015.06.004
M. Agata, H. Kowalska, S. Pasik, Mechanical and acoustic properties of dried apples. J. Fruit Ornam. Plant Res. 17(2), 127–137 (2009)
U. Berardi, G. Iannace, M.D. Gabriele, Characterization of sheep wool panels for room acoustic applications. Proc. Meet. Acoust. (2016). https://doi.org/10.1121/2.0000336
Synthetic Polymer Fibers, Polymer Properties Database. http://polymerdatabase.com/Fibers/Fibers.html. (2018). Accessed 04 Aug 2018
Advanced composite materials-FAA. https://www.faa.gov/regulations_policies/handbooks_manuals/aircraft/amt_airframe_handbook/media/ama_Ch07.pdf. Accessed 16 Aug 2018
M. Miniaci, A. Krushynska, A.B. Movchan, F. Bosia, N.M. Pugno, Spider web-inspired acoustic metamaterials. Appl. Phys. Lett. (2016). https://doi.org/10.1063/1.4961307
J.P. Arenas, M.J. Crocker, Recent trends in porous sound-absorbing materials. Sound Vib. 12–17 (2010)
G. Stephani, O. Andersen, P. Quadbeck, B. Kieback, Cellular metals for functional applications—an overview. PM2010 World Congress-Foams and Porous Materials. (2010)
T. Zhao, M. Yang, H. Wu, S. Guo, X. Sun, W. Liang, Preparation of a new foam/film structure poly(ethylene-co-octene) foam materials and its sound absorption properties. Mater. Lett. 139, 275–278 (2015). https://doi.org/10.1016/j.matlet.2014.10.061
J. Sikora, J. Turkiewicz, Sound absorption coefficients of granular materials. Mech. Control. 29, 149–157 (2010)
F.G. Cuevas, J.M. Montes, J. Cintas, P. Urban, Electrical conductivity and porosity relationship in metal foams. J. Porous. Mater. 16, 675 (2009). https://doi.org/10.1007/s10934-008-9248-1
S. Singh, N. Bhatnagar, A survey of fabrication and application of metallic foams (1925–2017). J. Porous. Mater. 25, 537–554 (2017). https://doi.org/10.1007/s10934-017-0467-1
G.L. Hao, F.S. Han, W.D. Li, Processing and mechanical properties of magnesium foams. J. Porous. Mater. 16, 251–256 (2009). https://doi.org/10.1007/s10934-008-9194-y
S. Gaydardzhiev, H. Gusovius, V. Wilker, P. Ay, Gel-casted porous Al2O3 ceramics by use of natural fibres as pore developers. J. Porous. Mater. 15, 475–480 (2008). https://doi.org/10.1007/s10934-007-9099-1
H. Wang, I. Sung, X. Li, D. Kim, Fabrication of porous SiC ceramics with special morphologies by sacrificing template method. J. Porous. Mater. 11, 265–271 (2004)
Z. Yan, K. Feng, J. Tian, Y. Liu, Effect of high titanium blast furnace slag on preparing foam glass–ceramics for sound absorption. J. Porous. Mater. (2019). https://doi.org/10.1007/s10934-019-00722-0
T.G. Zielinski, M. Potoczek, R.E. Sliwa, L.J. Nowak, Acoustic absorption of a new class of alumina foams with various high-porosity levels. Arch Acoust. 38, 495–502 (2013). https://doi.org/10.2478/aoa-2013-0059
China Ceramic Enterprises http://www.china-ceramics.org/english/products1.asp?id=3413 (2017) Accessed 11 Oct 2017
S. Mun, Sound absorption characteristics of porous asphalt concrete pavements. Can. J. Civ. Eng. 37, 273–278 (2010). https://doi.org/10.1139/l09-142
B. Peeters, I. Ammerlaan, A. Kuijpers, Noise reduction by absorbing road surfaces: destroying the horn effect, Proc. ISMA. 4053–4064 (2010)
M.O. Adebajo, R.L. Frost, J.T. Kloprogge, O. Carmody, S. Kokot, Porous materials for oil spill cleanup: a review of synthesis and absorbing properties. J. Porous. Mater. 10, 159–170 (2003)
J. Lefebvre, A. Leblanc, B. Genestie, T. Chartier, A. Lavie, Acoustic properties of aerogel encapsulated by macroporous cellulose. In the 23rd International Congress on Sound and Vibration ICSV23, Athens, Greece, 10–14, July 2016
P. Leroy, A. Berry, P. Herzog, N. Atalla, Experimental study of a smart foam sound absorber. J. Acoust. Soc. Am. 129, 154–164 (2011). https://doi.org/10.1121/1.3514502
C.A. Gentry, C. Guigou, C.R. Fuller, Smart foam for applications in passive–active noise radiation control. J. Acoust. Soc. Am. 101, 1771–1778 (1997). https://doi.org/10.1121/1.418234
M.J.M. Nor, M. Ayub, R. Zulkifli, N. Amin, M.H. Fouladi, Effect of different factors on the acoustic absorption of coir fiber. J. Appl. Sci. 10(22), 2887–2892 (2010)
M.N.A.A. Nordin, L.M. Wan, M.H. Zainulabidin, A.S.M. Kassim. A.M. Aripin, Research finding in natural fibers sound absorbing material, ARPN J. Eng. Appl. Sci. 11(14), 8579–8584 (2016)
R.S. Kumar, S. Sundaresan, Acoustic Textiles—Sound Absorption. Textile Technology. http://textination.de/de/document/1130003803282734/1.0/Acoustic20/Textiles20/sound20/absorption.pdf. Accessed 23 Mar 2017
A. Nick, U. Becker, W. Thoma, Improved acoustic behavior of interior parts of renewable resources in the automotive industry. J. Polym. Environ. 10, 115–118 (2002). https://doi.org/10.1023/a:1021124214818
H.S. Seddeq, Factors influencing acoustic performance of sound absorptive materials. Aust. J. Basic Appl. Sci. 3(4), 4610–4617 (2009)
W. Lauriks, J. Descheemaeker, A. Dijckmans, G. Vermeir, Characterisation of sound absorbing materials. In 10ème Congrès Français d’Acoustique. Lyon. 12–16 April 2010
Z. Liu, M. Fard, R. Jazar, Development of an acoustic material database for vehicle interior trims. SAE Technical Papers. (2015). https://doi.org/10.4271/2015-01-0046
N. Atalla, Introduction to the numerical modeling and experimental characterization of porous materials. Public Technical Course. Graz, Austria. July 1–2, 2014 https://www.fp7-eliquid.eu/PTC1folder/ptc1-materials/PTC1Lectures. Accessed 23 May 2018
N. Voronina, Acoustic properties of fibrous materials. Appl. Acoust. 42, 165–174 (1994)
T. Komatsu, Improvement of the Delany-Bazley and Miki models for fibrous sound-absorbing materials. Acoust. Sci. Tech. (2008). https://doi.org/10.1250/ast.29.121
V. Desarnaulds, E. Costanzo, A. Carvalho, B. Arlau, Sustainability of acoustic materials and acoustic characterization of sustainable materials. In the 12th International Congress on Sound and Vibration ICSV 12, Lisbon, 11–14 July 2005
R. Lanoye, G. Vermeir, W. Lauriks, R. Kruse, V. Mellert, Measuring the free field acoustic impedance and absorption coefficient of sound absorbing materials with a combined particle velocity-pressure sensor. J. Acoust. Soc. Am. (2006). https://doi.org/10.1121/1.2188821
F. Chevillotte, Controlling sound absorption by an upstream resistive layer. Appl. Acoust. (2012). https://doi.org/10.1016/j.apacoust.2011.07.005
M.E. Delany, E.N. Bazley, Acoustical properties of fibrous absorbent materials. Appl. Acoust. 3, 105–116 (1970)
D.A. Bies, C.H. Hansen, Flow resistance information for acoustical design. Appl. Acoust. 13, 357–359 (1980)
I.P. Dunn, W.A. Davern, Calculation of acoustic impedance of multi-layer absorbers. Appl. Acoust. (1986). https://doi.org/10.1016/0003-682X(80)90002-X
W. Qunli, Empirical relations between acoustical properties and flow resistivity of porous plastic open-cell foam. Appl. Acoust. 125, 141–148 (1988)
M. Yasushi, Acoustical properties of porous materials-Modifications of Delany-Bazley models. Acoust. Soc. Jpn. (1990). https://doi.org/10.1250/ast.11.19
H. Mamtaz, M.H. Fouladi, M. Al-Atabi, Modelling of acoustic wave propagation through the natural fiber composites. J. Eng. Sci. Technol. 1–10, (2015)
M. Garai, F. Pompoli, A simple empirical model of polyester fibre materials for acoustical applications. Appl. Acoust. 66, 1383–1398 (2005)
P.V. Bansod, A.R. Mohanty, Inverse acoustical characterization of natural jute sound absorbing material by the particle swarm optimization method. Appl. Acoust. 112, 41–52 (2016)
J.F. Allard, New empirical equations for sound propagation in rigid frame fibrous materials. J. Acoust. Soc. Am. 91(6), 3346–3353 (1992)
S. Rwawiire, B. Tomkova, J. Militky, L. Hes, B.M. Kale, A. Jabbar, Empirical modeling of sound absorption properties of natural nonwoven fabric (Antiaris toxicaria Barkcloth). Mater. Sci. Forum 868, 201–205 (2016). https://doi.org/10.4028/www.scientific.net/MSF.866.201
Y. Champoux, J.F. Allard, Dynamic tortuosity and bulk modulus in air saturated porous media. J. Appl. Phys. 70, 1975 (1991)
M.A. Biot, Theory of propagation of elastic waves in a fluid-saturated porous solid. I. Low-frequency range. J. Acoust. Soc. Am. (1956). https://doi.org/10.1121/1.1908241
U. Berardi, G. Iannace, Predicting the sound absorption of natural materials: best-fit inverse laws for the acoustic impedance and the propagation constant. Appl. Acoust. 115, 131–138 (2017)
C.E. Good, A.A. Glean, J.F. Vignola, J.A. Judge, T.J. Ryan, N.B. Bull, D. Turo, A design of an impedance tube for teaching acoustic material properties and laboratory techniques. Proc. Meet. Acoust. (2013). https://doi.org/10.1121/1.4798375
J. Wenger, T. Stern, J.P. Schoggl, R. Ree, U.D. Corato, I.D. Bari, G. Bell, H. Stichnothe, Natural fibers and fiber-based materials in biorefineries: status report 2018. IEA Bioenergy (2018)
P. Pecas, H. Carvalho, H. Salman, M. Leite, Natural fibre composites and their applications: a review. J. Compos. Sci. (2018). https://doi.org/10.3390/jcs2040066
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kalauni, K., Pawar, S.J. A review on the taxonomy, factors associated with sound absorption and theoretical modeling of porous sound absorbing materials. J Porous Mater 26, 1795–1819 (2019). https://doi.org/10.1007/s10934-019-00774-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-019-00774-2