Skip to main content
SpringerLink
Log in

Production of Aluminum Matrix Composite Material Hardened with Hollow Ceramic Microspheres

  • Published:
Metallurgist Aims and scope

In this paper the results of the investigation of the possibility of strengthening of aluminum alloys with hollow ceramic microspheres and also microspheres modified by pyrolytic chromium coatings, which increase the adhesion between the melt and the microspheres, are presented. Pyrolytic chromium coatings on the microsphere surface were obtained by vapor deposition (metal-organic chemical vapor deposition (MOCVD) method) using organochromium liquid, OCL, commercial name Barkhos. A number of aluminum-matrix composite materials based on the heat-treated by an “artificial aging” AK12ch alloy and heat-treated by “quenching and artificial aging” AK9ch alloy as well as non-heat-treated A6 alloy filled with ceramic microspheres having diameters of 40–80 μm and 100–200 μm have been obtained.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

Similar content being viewed by others

References

  1. Yu. A. Kurganova, “Prospects for developing metal matrix composite materials for industrial purposes,” Servis v Rossii i za Rubezhom, No. 3 (30), 235–240 (2012).

  2. Yu. A. Kurganova and A. G. Kolmakov, Structural Metal Matrix Composite Materials [in Russian], MGTU im. N. E. Baumana, Moscow (2015).

    Google Scholar 

  3. A. A. Panfilov, Ye. S. Prusov, and V. A. Kechin, “Challenges and potential for the development of the production and application of aluminum-matrix composite alloys,” Trudy Nizhegor. GTU im. R. E. Alekseeva, No. 2 (99), 210–218 (2013).

  4. N. A. Belov, V. D. Belov, A. N. Alabin, and S. S. Mishurov, “New generation of economically alloyed aluminum alloys,” Metallurgist, 54 (5–6), 311–316 (2010).

    Article  CAS  Google Scholar 

  5. D. K. Koli, G. Agnihotri, and R. Purohit, “Properties and characterization of Al–Al2O3 composites processed by casting and powder metallurgy routes (review),” Int. J. of Latest Trends in Eng. and Techn. (IJLTET), 2, 4, 486–493 (2013).

    Google Scholar 

  6. А. Gnanavelbabu, K. Rajkumar, and P. Saravanan, “Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites,” Mater. and Manufacturing Proc., 33, No. 12, 1313–1323 (2018).

    Article  CAS  Google Scholar 

  7. R. Liu, C. Wu, J. Zhang, et al., “Microstructure and mechanical behaviors of the ultrafine grained AA7075/B4C composites synthesized via one-step consolidation,” J. Alloys and Compounds, No. 748, 737–744 (2018); DOI:https://doi.org/10.1016/j.jallcom.2018.03.152.

    Article  CAS  Google Scholar 

  8. D. K. Koli, G. Agnihotri, and R. Purohit, “Properties and characterization of Al–Al2O3 composites processed by casting and powder metallurgy routes (review),” Int. J. of Latest Trends in Eng. and Techn. (IJLTET), 2, 4, 486–493 (2013).

    Google Scholar 

  9. B. Z. Dzhangurazov, G. V. Kozlov, and A. K. Mikitaev, “Effect of the interfacial adhesion level on the structure of nano-filler in polymer/organoclay nanocomposites,” Poverkhnost’. Rentgen. Sinkhron. i Neytron. Issled., No. 7, 96–99 (2011).

    Google Scholar 

  10. V. M. Serpova, A. A. Shavnev, Yu. O. Solyaev, M. V. Prokofiev, and L. N. Rabinskii, “Study of the interfaces in metal composite material based on aluminum alloy reinforced with alumina fibers,” Trudy VIAM, No. 8, 35–41 (2016).

    Google Scholar 

  11. V. M. Serpova, A. A. Shavnev, O. I. Grishina, Ye. I. Krasnov, and Yu. O. Solyaev, “Wettability and interfacial interaction in a metal composite material based on aluminum matrix reinforced with alumina,” Materialovedeniye, No. 12, 29–35 (2014).

  12. S. V. Voronin and P. S. Loboda, “Methods for producing porous aluminum-based materials,” Izv. Samar. Nauchn. Tsentra RAN, 18, No. 4-6, 1068–1074 (2016).

    Google Scholar 

  13. S. D. Samuilov and O. A. Troitskii, “New methods for producing porous metal materials with closed and open porosity,” Fundam. i Priklad. Probl. Techniki i Technol., No. 3 (323), 12–16 (2017).

  14. T. N. Teryaeva, O. V. Kostenko, Z. R. Ismagilov, et al., “Physical and chemical properties of alumosilicate hollow microspheres,” Vestn. Kuzbass GTU, No. 5 (99), 86–90 (2013).

  15. M. Spirin, “Ceramic and glass hollow microspheres (product and application information),” Lakokrasochnye Materialy i Ikh Primeneniye, No. 1-2, 34–35 (2008).

    Google Scholar 

  16. V. M. Shekunova, A. M. Ob’edkov, Ye. I. Tsyganova, et al., “Conversion of light alkanes using chromium-containing alumosilicate microspheres from fly ash,” Vesti YuUrGU, Ser. Khimiya, 9, No. 3, 37–47 (2017).

  17. A. I. Kirillov, A. M. Ob’edkov, V. A. Yegorov, et al., “Creating nanostructured composite materials based on multi-wall carbon nanotubes using MOCVD technology,” Nanotekhnika, No. 1, 72–78 (2011).

    Google Scholar 

  18. Ye. I. Kurbatkina, A. A. Shavnev, D. V. Kosolapov, and A. V. Gololobov, “Specifics of heat treatment of composite materials with aluminum matrix,” Trudy VIAM, No. 11 (59), 82–97 (2017).

  19. L. I. Kobeleva and T. A. Chernyshova, “Aging specifics of “aluminum alloy — SiC particles” composite,” Perspektivnye Materialy, 13, 389–396 (2011).

    Google Scholar 

  20. Ye. A. Chernyshov, A. D. Romanov, B. S. Kaverin, V. A. Varyukhin, A. M. Ob’edkov, and N. M. Semenov, “Development of technology for preparing composite material based on aluminum strengthened with hollow ceramic microspheres,” Metallurgist, 62, 11-12, 1255–1260 (2019).

Download references

Author information

Authors and Affiliations

  1. Nizhnii Novgorod State Technical University named after R. Ye. Alekseev, Nizhnii Novgorod, Russia

    A. D. Romanov, E. A. Romanova & E. A. Chernyshov

  2. Federal State Budgetary Institution of Science “Institute of Organometallic Chemistry named after G. A. Razuvaev,” Russian Academy of Sciences (RAS), Nizhnii Novgorod, Russia

    A. M. Ob’edkov, N. M. Semenov, B. S. Kaverin & I. V. Vilkov

Authors
  1. A. D. Romanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. E. A. Romanova
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. E. A. Chernyshov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. M. Ob’edkov
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. N. M. Semenov
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. B. S. Kaverin
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. I. V. Vilkov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. D. Romanov.

Additional information

Translated from Metallurg, Vol. 65, No. 3, pp. 68–72, March, 2021.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Romanov, A.D., Romanova, E.A., Chernyshov, E.A. et al. Production of Aluminum Matrix Composite Material Hardened with Hollow Ceramic Microspheres. Metallurgist 65, 320–325 (2021). https://doi.org/10.1007/s11015-021-01160-7

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11015-021-01160-7

Keywords

Search

Navigation