Abstract
In thermal power generation equipment, circumferential cracking in boiler tubes due to thermal cycling is a problem. Circumferential cracks form in the water-wall tube where sulfide corrosion occurs and in superheater and reheater tubes where high-temperature oxidation occurs. The main cause of the crack formations is thermal cycling, but sulfide corrosion and high-temperature oxidation also promote crack generation and accelerate crack progression. Therefore, preventing sulfide corrosion and/or high-temperature oxidation is one strategy for suppressing circumferential cracking. The authors previously developed a SiO2/TiO2/Al2O3-based/TiO2 coating for preventing sulfide corrosion and high-temperature oxidation on boiler tubes. In this work, to confirm the robustness and durability of the coating against circumferential cracking, laboratory experiments and exposure tests in actual power plants were performed. When applied to circumferentially cracked boiler tubes, the coating did not crack and suppressed growth of existing circumferential crack in comparison with an uncoated part.
Similar content being viewed by others
References
K. Nakagawa, I. Kajigaya, M. Tanaka, and S. Ohki, The Thermal and nuclear. 48, 1997 (508).
S. Cardoso and A. Facchiano, Proceedings of EPRI International Conference on Corrosion in Power Plants, San Diego, CA, 4–2 - 4–12. (2015).
M. Morinaga, S. Najima, N. Wakabayashi and H. Shirai, Proc. 7th International Symposium on Coal Combustion, Harbin, China, 736–741 (2012).
S. Najima, M. Morinaga, and S. Hayashi, Oxid Met. 85, 2016 (283).
S. Najima, M. Morinaga, and S. Hayashi, Oxid Met. 84, 2015 (633).
Y. Wang, X. Wang, M. Wang, and H. Tan, Energy & Fuels. 34, 2020 (13849).
S. Kyo, M. Nakamori, K. Kurokawa, and T. Narita, Zairyou-to-kankyou. 59, 2010 (456).
Y. Kawahara, Oxid Met. 85, 2016 (127).
Y. Kawahara, Zairyou-to-kankyou. 55, 2006 (172).
N. Lee, S. Kim, B. Choe, K. Yoon, and D. Kwon, Engineering Failure Analysis. 16, 2009 (2031).
M. Kawase and M. Morinaga, CRIEPI Report, M04 (2015).
M. Kawase, A. Ido, and M. Morinaga, Applied Thermal Engineering 153, 2019 (242).
N. B. Pilling and R. E. Bedworth, J. Inst. Met. 29, 1923 (529).
P. Hancock and R. C. Hurst, Advances in Corrosion Science and Technology, (Springer, Boston, 1974), pp. 1–84.
P.K. Datta, H.L. Du, J.S. Burnell-Gray and R. Ricker. CORROSION OF INTERMETALLICS. ASM Handbook Volume 13B Corrosion: Materials. 490–512 (2005).
K. Komai, Tetsu-to-Hagane. 69, 1983 (728).
T. Takahashi, K. Koyada, M. Uchiyama, Y. Kouda, Y. Horikawa, and T. Gouda, Thermal and Nuclear Power 42, 1991 (1704).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kawase, M., Ido, A. & Morinaga, M. Effectiveness of SiO2/TiO2/Al2O3-Based/TiO2 Coating for Suppressing Circumferential Cracking in Boiler Tubes at Thermal Power Plants. Oxid Met 96, 361–372 (2021). https://doi.org/10.1007/s11085-021-10065-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-021-10065-4