Abstract
A multi-scale contact method that can deal with tribological problems in a broad context is proposed. It is based on a numerical homogenization technique which allows to take into account a heterogeneous material and the generation of wear under contact conditions. Globally and locally, a finite element method is used. More precisely, at the micro scale, a behavior is computed from the microstructure and then injected into the macro model through contact stiffnesses. The approach being completely integrated between the macro and micro scales, a relocalization of the contact forces on the microstructure allows wear generation at the scale of the heterogeneities. An example is given in this paper where with respect to a reference case, the proposed method proves to be faster and as consistent.
Graphic Abstract
Similar content being viewed by others
Data Availability
Not applicable.
Code Availability
Not applicable.
References
Vakis, A., Yastrebov, V., Scheibert, J., Nicola, L., Dini, D., Minfray, C., Almqvist, A., Paggi, M., Lee, S., Limbert, G., et al.: Modeling and simulation in tribology across scales: an overview. Tribol. Int. 125, 169–199 (2018)
Berthier, Y.: Maurice Godet’s Third Body. Tribology Series, vol. 31, pp. 21–30. Elsevier, Amsterdam (1996)
Dhir, D.K.: Thermo-mechanical performance of automotive disc brakes. Mater. Today 5(1), 1864–1871 (2018)
Dufrénoy, P., Weichert, D.: A thermomechanical model for the analysis of disc brake fracture mechanisms. J. Thermal Stress. 26(8), 815–828 (2003)
Kao, T., Richmond, J., Douarre, A.: Brake disc hot spotting and thermal judder: an experimental and finite element study. Int. J. Vehicle Des. 23(3–4), 276–296 (2000)
Baba, H., Wada, T., Takagi, T.: Study on reduction of brake squeal caused by in-plane vibration on rotor. Tech. Rep, SAE Technical Paper (2001)
Liles, G.D.: Analysis of disc brake squeal using finite element methods. Tech. Rep, SAE Technical Paper (1989)
Massi, F., Baillet, L., Giannini, O., Sestieri, A.: Brake squeal: linear and nonlinear numerical approaches. Mech. Syst. Signal Process. 21(6), 2374–2393 (2007)
Greenwood, J., Williamson, J.P.: Contact of nominally flat surfaces. Proc. R. Soc. Lond. Ser. A 295, 300–319 (1966)
Bush, A., Gibson, R., Thomas, T.: The elastic contact of a rough surface. Wear 35(1), 87–111 (1975)
Ciavarella, M., Delfine, V., Demelio, G.: A “Re-vitalized’’ Greenwood and Williamson model of elastic contact between fractal surfaces. J. Mech. Phys. Solids 54, 2569–2591 (2006)
Nayak, P.R.: Random process model of rough surfaces. J. Lubr. Technol. 93(3), 398–407 (1971)
Persson, B.N.: Theory of rubber friction and contact mechanics. J. Chem. Phys. 115(8), 3840–3861 (2001)
Hertz, H.: Über die berührung fester elastischer körper und über die härte-verhandlungen des vereins zur beförderung des gewerbefleißes (1882)
Ciavarella, M., Papangelo, A., Barber, J.: Effect of wear on the evolution of contact pressure at a bimaterial sliding interface. Tribol. Lett. 68(1), 1–7 (2020)
Pei, L., Hyun, S., Molinari, J., Robbins, M.O.: Finite element modeling of elasto-plastic contact between rough surfaces. J. Mech. Phys. Solids 53(11), 2385–2409 (2005)
Bandeira, A.A., Wriggers, P., de Mattos Pimenta, P.: Numerical derivation of contact mechanics interface laws using a finite element approach for large 3d deformation. Int. J. Numer. Methods Eng. 59(2), 173–195 (2004)
De Lorenzis, L., Wriggers, P.: Computational homogenization of rubber friction on rough rigid surfaces. Comput. Mater. Sci. 77, 264–280 (2013)
Zavarise, G., Wriggers, P., Stein, E., Schrefler, B.: Real contact mechanisms and finite element formulation-a coupled thermomechanical approach. Int. J. Numer. Methods Eng. 35(4), 767–785 (1992)
Waddad, Y., Magnier, V., Dufrénoy, P., De Saxcé, G.: A multiscale method for frictionless contact mechanics of rough surfaces. Tribol. Int. 96, 109–121 (2016)
Dufrenoy, P., Magnier, V., Waddad, Y., Brunel, J.F., De Saxce, G.: A multiscale model of a disc brake including material and surface heterogeneities. SAE Int. J. Passeng. Cars Mech. Syst. 9, 1136–1143 (2016)
Chan, D., Stachowiak, G.: Review of automotive brake friction materials. Proc. Inst. Mech. Eng. Part D 218(9), 953–966 (2004)
Magnier, V., Brunel, J.F., Dufrénoy, P.: Impact of contact stiffness heterogeneities on friction-induced vibration. Int. J. Solids Struct. 51(9), 1662–1669 (2014)
Okada, H., Fukui, Y., Kumazawa, N.: Homogenization method for heterogeneous material based on boundary element method. Comput. Struct. 79(20–21), 1987–2007 (2001)
Qin, Q.H., Yang, Q.S.: Macro-micro Theory on Multi-field Coupling Behavior of Heterogeneous Materials. Springer, New York (2008)
Leroux, J., Fulleringer, B., Nelias, D.: Contact analysis in presence of spherical inhomogeneities within a half-space. Int. J. Solids Struct. 47(22–23), 3034–3049 (2010)
Hoan-Pham, Q., Ha-Minh, C., Long-Chu, T., Kanit, T., Imad, A.: Analysis of the transverse compressive behavior of Kevlar fibers using microscopic scale approach. Int. J. Mech. Sci. 164, 105149 (2019)
Pham, Q.H., Ha-Minh, C., Chu, T.L., Kanit, T., Imad, A.: On microscopic and homogenized macroscopic analysis of one Kevlar® km2 yarn under transverse compressive loading. Mech. Res. Commun. 104, 103496 (2020)
Temizer, I., Wriggers, P.: On the computation of the macroscopic tangent for multiscale volumetric homogenization problems. Comput. Methods Appl. Mech. Eng. 198(3–4), 495–510 (2008)
Archard, J.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24(8), 981–988 (1953)
Abu Bakar, A., Ouyang, H., James, S., Li, L.: Finite element analysis of wear and its effect on squeal generation. Proc. Inst. Mech. Eng. Part D 222(7), 1153–1165 (2008)
Arfa, E., Magnier, V., Dufrénoy, P., de Saxcé, G.: Contact modelling of highly heterogeneous friction material for braking applications. Mech. Ind. 21(5), 507 (2020)
Duboc, M.: Etude multi-échelle du crissement: dispositif expérimental et éléments de compréhension. Ph.D. thesis, Lille 1 (2013)
Waddad, Y., Magnier, V., Dufrénoy, P., De Saxcé, G.: Multiscale thermomechanical modeling of frictional contact problems considering wear-application to a pin-on-disc system. Wear 426, 1399–1409 (2019)
Dhieb, H., Buijnsters, J.G., Eddoumy, F., Celis, J.P.: Surface damage of unidirectional carbon fiber reinforced epoxy composites under reciprocating sliding in ambient air. Compos. Sci. Technol. 71(15), 1769–1776 (2011)
Sellami, A., Hentati, N., Kchaou, M., Chowdhury, M.A., Elleuch, R.: Effect of size and shape of copper alloys particles on the mechanical and tribological behavior of friction materials. Mech. Ind. 21(6), 613 (2020)
Aghababaei, R., Warner, D.H., Molinari, J.F.: Critical length scale controls adhesive wear mechanisms. Nat. Commun. 7(1), 1–8 (2016)
Milanese, E., Brink, T., Aghababaei, R., Molinari, J.F.: Role of interfacial adhesion on minimum wear particle size and roughness evolution. Phys. Rev. E 102(4), 043001 (2020)
Acknowledgements
The present research work has been supported by the ELSAT project, the Hauts-de-France Region, the European Union, the Regional Delegation for Research and Technology, the Ministry of Higher Education and Research and the National Center for Scientific Research. The authors gratefully acknowledge these institutions for their support.
Funding
Research supported by institutions listed in Acknowledgements section.
Author information
Authors and Affiliations
Contributions
Not applicable.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Consent to Participate
Not applicable.
Consent for Publication
I, corresponding author, and all the contributed authors give our consent for publication, for the present work, to Tribology Letters journal.
Ethical Approval
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Arfa, E., Magnier, V., Dufrénoy, P. et al. Multi-scale Contact Approach Considering Material Heterogeneity and Wear. Tribol Lett 69, 135 (2021). https://doi.org/10.1007/s11249-021-01507-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11249-021-01507-w