Abstract
In this study, a suitable method to simulate pipe-manufacturing processes (i.e., bending, unbending, and flattening) was developed to reproduce the process and the mechanical properties of the pipe. To verify the reliability of the strain distribution and plastic deformation behavior predicted by the proposed method, experimentally-derived strain by digital image correlation (DIC) and finite element analyses were employed. Hardness and tensile tests were performed on bent-flattened specimens. The finite element method confirmed that the proposed method can predict the yield strength of pipes.
Similar content being viewed by others
References
Shin SY, Hwang B, Lee S, Kim NJ, Ahn SS (2007) Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels. Mater Sci Eng A 458:281–289
Aleshin VV, Kobyakov VV, Seleznev VE (2011) A simulation technology for a full cycle of steel line pipe manufacturing operations. Adv Mech Eng 2011:1–7
Kim NJ (1983) The physical metallurgy of HSLA linepipe steels-a review. JOM 35:21–27
Sung HK, Lee DH, Shin SY, Lee S, Ro Y, Lee CS, Hwang B (2015) Effects of finish cooling temperature on tensile properties after thermal aging of strain-based API X60 linepipe steels. Metall Mater Trans A 46:3989–3998
Tanguy B, Luu TT, Perrin G, Pineau A, Besson J (2008) Plastic and damage behaviour of a high strength X100 pipeline steel: experiments and modelling. Int J Press Vessel Pip 85:322–335
Corona E, Kyriakides S (1988) On the collapse of inelastic tubes under combined bending and pressure. Int J Solids Struct 24:505–535
Shanmugam S, Ramisetti NK, Misra RDK, Hartmann J, Jansto SG (2008) Microstructure and high strength-toughness combination of a new 700MPa Nb-microalloyed pipeline steel. Mater Sci Eng A 478:26–37
Herynk MD, Kyriakides S, Onoufriou A, Yun HD (2007) Effects of the UOE/UOC pipe manufacturing processes on pipe collapse pressure. Int J Mech Sci 49:533–553
Kato C, Otoguro Y, Kado S, Hisamatsu Y (1978) Grooving corrosion in electric resistance welded steel pipe in sea water. Corros Sci 18:61–74
Lin M-B, Gao K, Wang C-J, Volinsky AA (2012) Failure analysis of the oil transport spiral welded pipe. Eng Fail Anal 25:169–174
Chandel JD, Singh NL (2011) Formation of X-120M line pipe through J-C-O-E technique. Eng 3:400–410
API specification 5L (2004) Specification for line pipe. 43rd edn. API, pp 9–16
Walsh WJ, Preston D (2010) Yield strength of line pipe: analysis of forming operations and flattened straps. 8th Int. pipeline Conf. Calgary, Alberta, Canada, pp 891-905
Huang XP, Cui WC (2006) Effect of Bauschinger effect and yield criterion on residual stress distribution of autofrettaged tube. J Press Vessel Technol 128:212–216
Kostryzhev A, Strangwood M, Davis CL (2007) Influence of microalloying precipitates on Bauschinger effect during UOE forming of line pipe steels. Mater Sci Technol 22:166–172
Kostryzhev A, Strangwood M, Davis CL (2010) Mechanical property development during UOE forming of large diameter pipeline steels. Mater Manuf Process 25:41–47
Han SY, Sohn SS, Shin SY, Bae J-H, Kim HS, Lee S (2012) Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels. Mater Sci Eng A 551:192–199
Sohn SS, Han SY, Shin SY, Bae J-H, Kim K, Kim NJ, Kim HS, Lee S (2012) Analysis and estimation of yield strength of API X80 linepipe steel pipe by low-cycle fatigue tests. Met Mater Int 18:597–606
Hu SJ, Marciniak Z, Duncan JL (2002) Mechanics of sheet metal forming, 2nd edn. Butterworth-Heinemann, Oxford, pp 82–107
Sohn SS, Han SY, Shin SY, Bae J-H, Lee S (2013) Analysis and estimation of the yield strength of API X70 and X80 linepipe steels by double-cycle simulation tests. Met Mater Int 19:377–388
Choi MK, Huh H (2014) Effect of punch speed on amount of springback in U-bending process of auto-body steel sheets. Proced Eng 81:963–968
Lim H, Lee MG, Sung JH, Kim JH, Wagoner RH (2012) Time-dependent springback of advanced high strength steels. Int J Plast 29:42–59
ASTM E 8–04 (2005) Standard test methods for tension testing of metallic materials. Annual book of ASTM standards. American Society for Testing and Materials, Philadelphia
Maximov JT, Duncheva GV, Kuzmanov TV (2008) Modelling of hardening behaviour of cold expanded holes in medium-carbon steel. J Constr Steel Res 64:261–267
Altan T, Tekkaya AE (2012) Sheet metal forming: fundamentals. ASM Int, Ohio, pp 89–98
Li W, Shi S, Wang F, Zhang Z, Ma T, Li J (2012) Numerical simulation of friction welding processes based on ABAQUS environment. J Eng Sci Technol Rev 5:10–19
Dassault Systémes Simulia Corp. (2013) Abaqus 6.12 Documentation. Providence, RI, USA
Zhang LC, Lu G, Leong SC (1997) V-shaped sheet forming by deformable punches. J Mater Process Technol 63:134–139
Pavlina EJ, Van Tyne CJ (2008) Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform 17:888–893
Choi CW, Koh HJ, Lee S (2000) Analysis and prevention of yield strength drop during spiral piping of two high-strength API-X70 steels. Metall Mater Trans A 31:2669–2674
Zou T, Li D, Wu G, Peng Y (2016) Yield strength development from high strength steel plate to UOE pipe. Mater Design 89:1107–1122
Acknowledgements
This work was supported by POSCO under contract No. 2015Y002.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moon, J., Jeong, H.J., Joo, SH. et al. Simulation of Pipe-Manufacturing Processes Using Sheet Bending-Flattening. Exp Mech 58, 909–918 (2018). https://doi.org/10.1007/s11340-018-0397-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-018-0397-0