Skip to main content
SpringerLink
Log in

LCA-based study on structural retrofit options for masonry buildings

  • BUILDING COMPONENTS AND BUILDINGS
  • Published:
The International Journal of Life Cycle Assessment Aims and scope Submit manuscript

Abstract

Purpose

Over the last decade, the rehabilitation/renovation of existing buildings has increasingly attracted the attention of scientific community. Many studies focus intensely on the mechanical and energy performance of retrofitted/renovated existing structures, while few works address the environmental impact of such operations. In the present study, the environmental impact of typical retrofit operations, referred to masonry structures, is assessed. In particular, four different structural options are investigated: local replacement of damaged masonry, mortar injection, steel chain installation, and grid-reinforced mortar application. Each different option is analyzed with reference to proper normalized quantities. Thus, the results of this analysis can be used to compute the environmental impact of real large-scale retrofit operations, once the amount/extension of them is defined in the design stage. The final purpose is to give to designers the opportunity to monitor the environmental impact of different retrofit strategies and, once structural requirements are satisfied, identify for each real case the most suitable retrofit option.

Methods

The environmental impact of the structural retrofit options is assessed by means of a life-cycle assessment (LCA) approach. A cradle to grave system boundary is considered for each retrofit process. The results of the environmental analysis are presented according to the data format of the Environmental Product Declaration (EPD) standard. Indeed, the environmental outcomes are expressed through six impact categories: global warming, ozone depletion, eutrophication, acidification, photochemical oxidation, and nonrenewable energy.

Results and discussion

For each retrofit option, the interpretation analysis is conducted in order to define which element, material, or process mainly influenced the LCA results. In addition, the results revealed that the recycling of waste materials provides environmental benefits in all the categories of the LCA outcomes. It is also pointed out that a comparison between the four investigated options would be meaningful only once the exact amount of each operation is defined for a specific retrofit case.

Conclusions

This paper provides a systematic approach and environmental data to drive the selection and identification of structural retrofit options for existing buildings, in terms of sustainability performance. The final aim of this work is also to provide researchers and practitioners, with a better understanding of the sustainability aspects of retrofit operations. In fact, the environmental impacts of the retrofit options here investigated can be used for future research/practical activities, to monitor and control the environmental impact of structural retrofit operations of existing masonry buildings.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  • AFV Beltrame Group (2012) Environmental product declaration of manufacturing plants. Institut Bauen und Umwelt e.V. (IBU) Declaration nr. S-P-00252

  • Allacker K (2012) Environmental and economic optimization of the floor on grade in residential buildings. Int J Life Cycle Assess 17:813–827

    Article  Google Scholar 

  • Asadi E, da Silva MG et al (2012) Multi-objective optimization for building retrofit strategies: a model and an application. Energ Build 44:81–87

    Article  Google Scholar 

  • Ascione F, de Rossi F et al (2011) Energy retrofit of historical buildings: theoretical and experimental investigations for the modelling of reliable performance scenarios. Energ Build 43(8):1925–1936

    Article  Google Scholar 

  • Biekšaa D, Šiupšinskas G et al (2011) Energy efficiency challenges in multi-apartment building renovation in Lithuania. J Civ Eng Manag 17(4):467–475

    Article  Google Scholar 

  • Bosiljkov V, Uranjek M et al (2010) An integrated diagnostic approach for the assessment of historic masonry structures. J Cult Herit 11(3):239–249

    Article  Google Scholar 

  • Boylu M (2005) A benefit/cost analysis for the seismic rehabilitation of existing reinforced concrete buildings in Izmir. İzmir Institute of Technology, İzmir, p 206

    Google Scholar 

  • Chen MZ, Lin JT et al (2011) Utilization of recycled brick powder as alternative filler in asphalt mixture. Construct Build Mater 25(4):1532–1536

    Article  Google Scholar 

  • Circolare n. 617 (2009) Istruzioni per l’applicazione delle ‘Nuove norme tecniche per le costruzioni di cui al decreto ministeriale 14 gennaio 2008

  • CNR-DT 200 (2004) Consiglio Nazionale delle Ricerche, guide for the design and construction of externally bonded FRP system for strengthening existing structures. Rome 13/07/2004

  • Das S (2011) Life cycle assessment of carbon fiber-reinforced polymer composites. Int J Life Cycle Assess 16(3):268–282

    Article  CAS  Google Scholar 

  • DOCC&EE (2011) Securing a clean energy future - The australian government’s climate change plan. Department of Climate Change and Energy Efficiency, Commonwealth of Australia - ISBN 978-0-642-74723-5

  • Flourentzou F, Roulet CA (2002) Elaboration of retrofit scenarios. Energ Build 34(2):185–192

    Article  Google Scholar 

  • Foxon TJ, Mcilkenny G et al (2002) Sustainability criteria for decision support in the UK water industry. J Environ Plann Manag 45(2):285–301

    Article  Google Scholar 

  • Hedemann J, König U (2007) Technical documentation of the ecoinvent database. Final report ecoinvent data v2.2 No. 4, Swiss Centre for Life Cycle Inventories, Dübendorf, Switzerland

  • HUD/U.S. (2005) U.S. Department of Housing and Urban Development Washington, DC 20410–8000 - MORTGAGEE LETTER 2005–50: Enhancements to “Streamlined (k)” Limited Repair Program

  • ISO:14025 (2006) Environmental labels and declarations—type III environmental declarations—principles and procedures, ISO - International Organization for Standardization

  • ISO:14040 (2006) Environmental management—life cycle assessment—principles and framework, ISO - International Organization for Standardization

  • ISO:14044 (2006) Environmental management—life cycle assessment—requirements and guidelines, ISO - International Organization for Standardization

  • Juan Y-K, Kim JH et al (2009) GA-based decision support system for housing condition assessment and refurbishment strategies. Autom Constr 18(4):394–401

    Article  Google Scholar 

  • Kanapeckiene L, Kaklauskas A et al (2011) Method and system for multi-attribute market value assessment in analysis of construction and retrofit projects. Expert Syst Appl 38(11):14196–14207

    Google Scholar 

  • Ma Z, Cooper P, Daly D, Ledo L (2012) Existing building retrofits: methodology and state-of-the-art. Energ Build 55:889–902

    Article  Google Scholar 

  • Menna C, Asprone D et al (2013) Assessment of ecological sustainability of a building subjected to potential seismic events during its lifetime. Int J Life Cycle Assess 18:504–515

    Article  Google Scholar 

  • MIT (2014) Ministero delle Infrastrutture e dei Trasporti (Italy) - DECRETO-LEGGE 28 marzo 2014, n. 47 Misure urgenti per l’emergenza abitativa, per il mercato delle costruzioni e per Expo 2015. (14G00059) (GU n.73 del 28-3-2014)

  • Moliner E, Fabregat J, Cseh M, Vidal R (2013) Life cycle assessment of a fibre-reinforced polymer made of glass fibre phenolic resin with brominated flame retardant. 1st Symposium of the Spanish LCA Network: LCA & Bioenergy, 2013

  • NTC (2008) NTC, Norme Tecniche per le Costruzioni, D.M 14 gennaio 2008

  • Perini K (2013) Retrofitting with vegetation recent building heritage applying a design tool—the case study of a school building. Front Architect Res 2(3):267–277

    Article  Google Scholar 

  • Raslanasa S, Alchimovienėa J et al (2011) Residential areas with apartment houses: analysis of the condition of buildings, planning issues, retrofit strategies and scenarios. Int J Strat Prop Manag 15(2):152–172

    Article  Google Scholar 

  • ReLuis (2011) (Rete dei Laboratori Universitari di Ingegneria Sismica), linee guida per riparazione e rafforzamento di elementi strutturali, tamponature e partizioni, www.reluis.it/doc/pdf/Linee_guida1.pdf

  • Rodrigues C, Freire F (2014) Integrated life-cycle assessment and thermal dynamic simulation of alternative scenarios for the roof retrofit of a house. Build Environ 81:204–215

    Article  Google Scholar 

  • Sahely HR, Kennedy CA, Adams BJ (2005) Developing sustainability criteria for urban infrastructure systems. Can J Civ Eng 32(1):71–85

    Article  Google Scholar 

  • UNI EN 1015–19 (2008) Methods of test for mortar for masonry—part 19: determination of water vapour permeability of hardened rendering and plastering mortars

  • UNI EN 13242 (2002) Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

  • UNI EN 15804 (2012) Sustainability of construction works—environmental product declarations—core rules for the product category of construction products

  • UNI EN 998–2 (2004) Specification for mortar for masonry—masonry mortar

  • Užšilaitytea L, Martinaitis V (2010) Search for optimal solution of public building renovation in terms of life cycle. J Environ Eng Landsc 18(2):102–110

    Article  Google Scholar 

  • Waheed B, Khan F et al (2009) Linkage-based frameworks for sustainability assessment: making a case for driving force-pressure-state-exposure-effect-action (DPSEEA) frameworks. Sustainability 1:441–463

    Article  Google Scholar 

  • Wu S, Zhu J et al (2011) Experimental investigation on related properties of asphalt mastic containing recycled red brick powder. Construct Build Mater 25(6):2883–288

    Article  Google Scholar 

  • Xing Y, Hewitt N, Griffiths P (2011) Zero carbon buildings refurbishment—a hierarchical pathway. Renew Sust Energ Rev 15(6):3229–3236

    Article  Google Scholar 

  • Zhang C, Lin WX et al (2012) Environmental evaluation of FRP in UK highway bridge deck replacement applications based on a comparative LCA study. Adv Mat Res 374:43–48

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Structures for Engineering and Architecture, University ofNaples, Federico II, Via Claudio 21, 80125, Naples, Italy

    Loredana Napolano, Costantino Menna, Domenico Asprone, Andrea Prota & Gaetano Manfredi

  2. Stress S.c.ar.l. Sviluppo Tecnologie e Ricerca per l’Edilizia sismicamente Sicura ed ecoSostenibile, vico II S.Nicola alla Dogana 9, 80133, Naples, Italy

    Loredana Napolano

Authors
  1. Loredana Napolano
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Costantino Menna
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Domenico Asprone
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Andrea Prota
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Gaetano Manfredi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Loredana Napolano.

Additional information

Responsible editor: Marzia Traverso

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Napolano, L., Menna, C., Asprone, D. et al. LCA-based study on structural retrofit options for masonry buildings. Int J Life Cycle Assess 20, 23–35 (2015). https://doi.org/10.1007/s11367-014-0807-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11367-014-0807-1

Keywords

Search

Navigation