Abstract
The solidification characteristics and segregation behavior of Cu-15Ni-8Sn alloy were systematically investigated in the present study. The solidification characteristics were revealed with the assistance of a solidification quenching experiment, DTA analysis and Scheil simulation. The solidification microstructure of Cu-15Ni-8Sn alloy was characterized by SEM, and the results indicated that the as-cast microstructure of Cu-15Ni-8Sn alloy mainly consists of Sn-depleted α-Cu(Ni,Sn) matrix, Sn-rich γ phase and lamellar (α + γ) structure. It has been demonstrated that the solidification process begins with the nucleation and growth of primary Sn-depleted α1 phase (\( L \to \alpha_{1} \) at 1114 °C) and terminates with the divorced eutectic reaction (\( L_{2} \to \alpha_{2} + \gamma \) at 868 °C). During the subsequent cooling process, the discontinuous precipitation (\( \alpha_{2} \to \alpha_{1} + \gamma \)) takes place in the temperature range from about 700 °C to 600 °C. In addition, the macrosegregation behavior of Sn in Cu-15Ni-8Sn alloy was investigated by adopting vertical unidirectional solidification and measuring the cooling curves at different positions. The results indicated that an inverse macrosegregation of Sn solute exists in the as-prepared ingot, which mainly segregates at the chill surface of the alloy ingot. Namely, the Sn content is higher than 8 wt pct at the chill surface and about 8 wt pct inside the ingot for Cu-15Ni-8Sn alloy.
Similar content being viewed by others
References
L.H. Schwartz, S. Mahajan, J.T. Plewes, Acta Metall.,1974, vol. 22, pp. 601-609
L.H. Schwartz, J.T. Plewes, Acta Metall.,1974, vol. 22, pp. 911-921
W.R. Cribb, F.C. Grensing, Can. Metall. Quart.,2013, vol. 50, pp. 232-239
W.R. Cribb, M.J. Gedeon, F.C. Grensing, Adv. Mater. Process.,2013, vol. 171, pp. 20-25
J.C. Rhu, S.K. Sang, C.J. Yun, S.Z. Han, J.K. Chang, Metall. Mater. Trans. A,1999, vol. 30, pp. 2649-2657
C.R. Scorey, S. Chin, M.J. White, R.J. Livak, J. Met.,1984, vol. 36, pp. 52-54
P. Goudeau, A. Naudon, J.M. Welter, Scripta Mater.,1988, vol. 22, pp. 1019-1022
L.E. Collins, J.R. Barry, Mater. Sci. Eng.,1988, vol. 98, pp. 335-338
L. Deyong, R. Tremblay, R. Angers, Mater. Sci. Eng. A,1990, vol. 124, pp. 223-231
R.H. Cookey, J.V. Wood, Powder Metall.,2013, vol. 33, pp. 335-338
P. Kratochvíl, J. Mencl, J. Pešička, S.N. Komnik, Acta Metall.,1984, vol. 32, pp. 1493-1497
H. Pal, S.K. Pradhan, M. De, Jpn. J. Appl. Phys.,1995, vol. 34, pp. 1619
J.C. Zhao, M.R. Notis, Scripta Mater.,1998, vol. 39, pp. 1509-1516
Y. Ouyang, X. Gan, Z. Li, K. Zhou, S. Zhang, Y. Jiang, X. Zhang, Mater. Sci. Eng. A,2017, vol. 704, pp
P. Hermann, D.G. Morris, Metall. Mater. Trans. A,1994, vol. 25, pp. 1403-1412
J. Caris, D. Li, J.J.S. Jr, J.J. Lewandowski, Mater. Sci. Eng. A,2010, vol. 527, pp. 769-781
M. Kato, L.H. Schwartz, Mater. Sci. Eng.,1979, vol. 41, pp. 137-142
P. Virtanen, T. Tiainen, Mater. Sci. Eng. A,1997, vol. 238, pp. 407-410
J.B. Singh, W. Cai, P. Bellon, Wear,2007, vol. 263, pp. 830-841
L. Jihui, L. Xuefeng, S. Laixin, C. Changfei, Mater. Sci. Forum.,2016, vol. 850, pp. 610-617
X.Y. Liu, D. Tham, D. Yates, M.M. Jr, Mater. Sci. Eng. A,2007, vol. 458, pp. 123-125
J. Miettinen, Calphad.,2003, vol. 27, pp. 309-318
Z.-J. Wang, T.J. Konno, Philos. Mag.,2013, vol. 93, pp. 949-974
S. Semboshi, J. Ikeda, A. Iwase, T. Takasugi, S. Suzuki, Materials,2015, vol. 8, pp. 3467-3478
S. Semboshi, S. Sato, A. Iwase, T. Takasugi, Mater. Charact.,2016, vol. 115, pp. 39-45
B. Alili, D. Bradai, P. Zieba, Mater. Charact.,2008, vol. 59, pp. 1526-1530
J.C. Zhao, M.R. Notis, Acta Mater.,1998, vol. 46, pp. 4203-4218
I. Manna, S.K. Pabi, W. Gust, Int. Mater. Rev.,2001, vol. 46, pp. 53-91
E. Contreras-Piedras, R. Esquivel-Gonzalez, V.M. Lopez-Hirata, M.L. Saucedo-Munoz, A.M. Paniagua-Mercado, H.J. Dorantes-Rosales, Mater. Sci. Eng. A,2010, vol. 527, pp. 7775-7778
E. Haug, A. Mo, H.J. Thevik, Int. J. Multiphas. Flow,1995, vol. 38, pp. 1553-1563
S. Minakawa, I.V. Samarasekera, F. Weinberg, Metall. Mater. Trans. B,1985, vol. 16, pp. 595-604
P. Rousset, M. Rappaz, B. Hannart, Metall. Mater. Trans. A,1995, vol. 26, pp. 2349-2358
H.J. Thevik, A. Mo, T. Rusten, Metall. Mater. Trans. B,1999, vol. 30, pp. 135-142
J.A. Dantzig, M. Rappaz, EPFL Press, 2009, London, vol., pp. 578–605
Acknowledgments
The authors gratefully acknowledge the support of National Key Research and Development Program of China (Nos. 2017YFB0306105, 2016YFB0301303), the National Natural Science Foundation of China (Nos. 51771040, 51501028, 51690163, 51871041) and Fundamental Research Funds for the Central Universities of China (No. DUT17JC44), to whom we are very grateful.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted August 29, 2019.
Rights and permissions
About this article
Cite this article
Guo, Z., Jie, J., Liu, S. et al. Solidification Characteristics and Segregation Behavior of Cu-15Ni-8Sn Alloy. Metall Mater Trans A 51, 1229–1241 (2020). https://doi.org/10.1007/s11661-019-05609-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-019-05609-y