Abstract
Workpieces of a low carbon steel (LCS) are deformed by equal-channel angular pressing (ECAP) up to an equivalent strain of 6 in their as-received, coarse-grained condition. ECAP of LCS produces an ultrafine-grained (UFG) banded structure of 0.6 μm in width, with a high dislocation density and lattice strain. Though the refinement improves strength significantly, the material suffers from a detrimental low ductility. ECAPed samples are therefore electropulsed to recover the ductility to a large extent. A mechanism, by which a unique microstructure that fecilitates the regainment of ductility, is proposed in this study. Electropulsing (EP) creates additional low angle grain boundaries (LAGBs) by electromigration of dislocations within the grain and leads to the migration of high angle grain boundaries (HAGBs) under high electron wind force. Groups of subgrain boundaries move towards high angle grain boundaries and coalesce, producing a region of relatively lower defect density, i.e., the formation of recrystallized nuclei. On further pulsing, the HAGBs of the recrystallized nuclei continue to migrate and eventually impinge on each other. As a result, a bimodal grain size distribution consisting of micron-sized, near-equiaxed grains that are favorably interspersed with UFG grains occurs, and has a low defect density. The microstructure is clear of any residual strain. Upon electropulsing the strength of ECAPed LCS is marginally traded off for a larger gain in ductility. The micron-sized grains of the bimodal distribution are understood to accommodate larger deformations and enhance the ductility.
Similar content being viewed by others
References
1. R.Z. Valiev (2001) Met. Mater. Int. 7(5):413-420
Y. Fukuda, K. Oh-Ishi, Z. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, pp. 1359–1368.
3. R. B. Singh, N. K. Mukhopadhyay, G. V. S. Sastry, R. Manna (2017) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 48:5449-5466
J.T. Wang, C. Xu, Z.Z. Du, G.Z. Qu, and T.G. Langdon: Mater. Sci. Eng A., 2005, vol. 410–411, pp. 312–315.
5. R. Manna, N.K. Mukhopadhyay, G.V.S. Sastry (2008) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 39:1525-1534
R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.
Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–915.
8. R. B. Singh, N. K. Mukhopadhyay, G. V. S. Sastry, R. Manna (2017) Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 48:1189-1203
Reza Alaghmand Fard, Mohsen Kazeminezhad: J. Mater Technol. 2019, vol. 8(3), pp.3114–3125.
B. Ma, Y. Zhao, J. Ma, H. Guo, and Q. Yang: J. Alloys Compd., 2013, vol. 549, pp. 77–81.
X. N. Du, B. Q. Wang, and J. D. Guo: J. Mater. Res., 2007, vol. 22, pp. 1947–1953.
R. S. Qin, A. Rahnama, W. J. Lu, X. F. Zhang and B. Elliott-Bowman, Mater. Sc. Technol, 2014, vol30, pp 1040-1044.
J. Zhang, Z. Liu, J. Sun, H. Zhao, Q. Shi, D. Ma, Mater. Sci. Eng, 2020, vol A782, 139213, pp.1-10.
X.N. Du, S.M. Yin, S.C. Liu, B.Q. Wang, and J.D. Guo: J. Mater. Res., 2008, vol. 23, pp. 1570–1577.
Z. Yuanyun, W. Baoquan, G. Jingdong, Chin Shu Hsueh Pao, J. Chinese, 2009, vol. 45, No. 11, pp. 1325-1329.
W. Yue, R. Qin, K. Wu, Adv. Mater Res. 2011, vol. 146-147, pp. 1849-1854.
Y. Zhou, W. Zhang, M. Sui, D. Li, G.He, Jingdong Guo, J. Mater Res, 2002, vol. 17, No. 05, pp. 921 – 924.
E .S. MacHlin: J. Appl. Phys., 1959, vol. 30, pp. 1109–1110.
O. Troitskii: Pis’ma Zhurn Experim Teor. Fiz, 1969, vol.10(1), pp.18-22.
20. K. Okazaki, M. Kagawa, H. Conrad (1978) Scr. Metall. 12:1063-1968
A. F. Sprecher, S. L. Mannan and H. Conrad: Acta Metall., 1986, vol. 34, pp. 761–800.
Y. Zhou, S. Xiao, and J. Guo: Mater. Lett., 2004, vol. 58, pp. 1948–1951.
Y. Yuan, W. Liu, B. Fu, H. Xu, G. Luo, G. Tang, and Y. Jiang: J. Mater. Res., 2012, vol. 27, pp. 2630–2638.
X. Xu, Y. Zhao, B. Ma, J. Zhang, and M. Zhang: Mater. Sci. Eng A, 2014, vol. 612, pp. 223–226.
Y. Zhao, B. Ma, H. Guo, J. Ma, Q. Yang, J. Song, Materials and Design, 2013, vol. 43, pp. 195–199.
26. Y. Zhao, J. Zhang, J. Tan, B. Ma (2014) J. Iron Steel Res. I. 21(7):685-689
27. Antonio J, Sánchez E, Hernán A. González R, CelentanoDiego J, Jorba PJ (2016) Mater. Des. 90:1159-1169
Y.R. Ma, H.J. Yang, Y.Z. Tian, J.C. Pang, Z.F. Zhang, Mater Sc Eng. A, 2018, vol.713, pp.146–150.
29. S. Xiang, X. Zhang (2019) Mater. Sci. Eng. 761:138026
H. P. Klug, and L. E. Alexander, X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, Wiley, New York, 1954.
G. K. Williamson and R. E. Smallman: Philos. Mag., 1956, vol. 1, pp. 34–46.
R.E. Smallman and K.H. Westmacott: Philos. Mag., 1957, vol. 2, pp. 669–83.
K. Zhang, I.V. Alexandrov, A.R. Kilmametovz, R.Z. Valiev, and K. Luy: J. Phys. D: Appl. Phys., 1997, vol. 30, pp. 3008–15.
34. R. Singh, S. Kumar, N. K. Mukhopadhyay, G. V. S. Sastry, R. Manna (2013) Intl. J. Met Eng 2(1):62-68
D. Verma, N. K. Mukhopadhyay, G. V. S. Sastry, and R. Manna, Metall Mater Trans A,2016, vol. 7(4), pp.1803-1817.
D. Verma, N.K. Mukhopadhyay, G. V. S. Sastry, and R. Manna, Trans IIM, 2017, 70(4), pp.917-926.
S. H. Xiao, J. D. Guo, S. D. Wu, G. H. He, S. X. Li, Scripta Materialia, 46 (2002), pp. 1-6.
A. F. Sprecher, S.L. Mannan, and H. Conrad: Scr. Metall., 1983, vol. 17, pp. 769–772.
39. J. Zhao, G.X. Wang, Y. Dong, C. Ye (2017) J. Appl. Phys. 2:24
Y. Zhou, W. Zhang, B. Wang, G. He, and J. Guo: J. Mater. Res., 2002, vol. 17, pp. 2105–2111.
Y. Zhou, J. Guo, W. Zhang, and G. He: J. Mater. Res., 2002, vol. 17, pp. 3012–3014.
K. Okazaki, M. Kagawa, H. Conrad, Mater. Sci. Eng., 1980, vol. 45, pp. 109–116.
H. Conrad, Mater Sci Eng, 2000, vol. A287, pp. 276–287.
H. Conrad: Mater. Sci. Eng. A., 2002, vol. 322, pp. 100–107.
P. S. Ho and T. Kwok: Reports Prog. Phys., 1989, vol. 52, pp. 301–348.
W. J. Lu, X. F. Zhang, and R.S. Qin: Mater. Sci. Technol. (United Kingdom), 2015, vol. 31, pp. 1530–1535.
Y. Jiang, G. Tang, L. Guan, S. Wang, Z. Xu, C. Shek, and Y. Zhu: J. Mater. Res., 2008, vol. 23, pp. 2685–2691.
O. A Troitskii, ProblemyProchnosti,1984, vol.2, pp. 176.
O. A Troitskii. Rus Metal Metally, 1984, vol.2, pp. 192-195.
50. Kiryanchev NE, Troitskii OA, Krasnoyarskii VV, Petrova LM, Stashenko VI, Gavrish AA, Miseev VP (1985) Elektronnaya Obrabotka Materialov 2:54-58
O. A. Troitskii and M. M. Moiseenko, Russian Metallurgy (Metally), 1985, vol. 6, pp. 148-151.
52. M. M. Moiseenko, O. A. Troitskii (1987) Rus. Metal (Metally) 1:159-161
53. G. Tang, J. Zhang, M. Zheng, J. Zhang, W. Fang, Q. Li (2000) Mater. Sci. Eng. A 281:263-67
G. Tang, M. Zheng, Y. Zhu, J. Zhang, W. Fang, and Q. Li, J. Mater proc technol, 1998, vol. 84, pp. 268-270.
X. Suhong, Z. Yizhou, G. Jingdong, W. Shiding, Y. Ge, L. Shouxin, H. Guanhu, Z. Benlian, Mater Sci Eng A, 2002, vol. A332, pp. 351–355.
X. Li, Y. Guan, Nanotechnology and Precision Engineering, 2020, vol. 3, pp. 105–125.
X. Pan, X. Wang, Z. Tian, W. He, X. Shi, P. Chen, and L. Zhou: J. Alloys Compd., 2021, vol. 850, pp. 156672.
Y. Yang, K. Zhou, and G. Li: Opt. Laser Technol., 2019, vol. 109, pp. 1–7.
S. Petronic, T. Sibalija, M. Burzic, S. Polic, K. Colic and D. Milovanovic, Metals, 2016, vol. 6, 41, pp. 1-14.
60. D. Bauerle (2003) Laser Processing and Chemistry. Springer, Berlin, pp 13-256
61. J.P. Chu, J.M. Rigsbee, G. Banas, H.E. Elsayed-Ali (1999) Mater. Sci. Eng. 260A:260–68
P. Peyre, L. Berthe, X. Scherpereel, R. Fabbro, E. Bartniki, J. Appl. Phys. 1998, vol. 84, pp. 5985–5992.
N. L. LaHaye, S. S. Harilal, P. K. Diwakar, A. Hassanein. J Anal At Spectrom 2013, vol. 28, pp.1781-1787.
Acknowledgments
The authors wish to thank the Board of Research in Nuclear Sciences, Department of Atomic Energy, Government of India for the financial support under the Project No. 34/14/18/2015/BRNS dated 6th July 2015 and Advanced Research Centre for Iron and Steel of the Institute, funded by Steel Development Fund, Ministry of Steel, Government of India, under a Project No. No: 11(10)/SDF/2012-TW dated 14th March 2016 for extending X-ray diffractometer and Electron Back Scattered Diffraction Facility.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted July 1, 2020; accepted April 11, 2021.
Rights and permissions
About this article
Cite this article
Bhuyan, D., Pandey, R.K., Ojha, S.N. et al. Recovery of Ductility in Ultrafine-Grained Low Carbon Steel Processed by Electropulsing. Metall Mater Trans A 52, 2992–3006 (2021). https://doi.org/10.1007/s11661-021-06293-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-021-06293-7