Skip to main content

Advertisement

SpringerLink
Log in

Extruded Fiber-Reinforced Composites Manufactured from Recycled Wind Turbine Blade Material

  • Original Paper
  • Published:
Waste and Biomass Valorization Aims and scope Submit manuscript

Abstract

Energy conservation is one of the most challenging issues throughout the world. As consumers demand alternatives to fossil fuel, the use of alternative energy sources including wind energy is increasing. With an increase in the use of wind energy a collateral issue of what to do with the large and voluminous wind turbine blades (WTB) has arisen. Currently, there are no economically viable recycling pathways for damaged or end-of-life WTBs, which are made primarily of glass fiber composites. This research evaluates an economically viable composite fabrication system using mechanically recycled WTB (rWTB) material as a feedstock for thermoplastic composites. The WTB material was first mechanically milled and classified through a range of varying screen sizes. We then blended this with high density polyethylene (HDPE) thermoplastic resin and extruded it to a profiled composite. We determined the influence of refined particle size, resin content and coupling agents [maleic anhydride polyethylene (MAPE) and methacryloxypropyltriethoxysilane (Silane)] on the properties of recycled composites. We also obtained static bending, coefficient of linear thermal expansion (CLTE) and water sorption properties for all composites. Overall improvement of mechanical and physical properties of composites achieved by using MAPE as a coupling agent. Findings show that mechanical recycling of wind turbine blades is a feasible and promising way to fabricate a high-performance second-generation composite.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Liu, P., Barlow, C.W.: Wind turbine blade waste in 2015. Waste Manag. 62, 229–240 (2017)

    Article  Google Scholar 

  2. Beauson, J., Madsen, B., Toncelli, C., et al.: Recycling of shredded composites from wind turbine blades in new thermoset polymer composites. Composites A 90, 390–399 (2016)

    Article  Google Scholar 

  3. Mamanpush, S.H., Li, H., Englund, K., Tabatabaei, A.T.: 2018, Recycled wind turbine blades as a feedstock for second generation composites. Waste Manag. https://doi.org/10.1016/j.wasman.2018.02.050

    Article  Google Scholar 

  4. Kennerley, J.R., Kelly, R.M., Fenwick, N.J., et al.: The characterization and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process. Composites A 29(7), 839–845 (1998)

    Article  Google Scholar 

  5. Mamanpush, S.H., Tabatabaei, A.T., Li, H., Englund, K.: Data on the mechanical properties of recycled wind turbine blade composites. Data Brief. 19, 230–235 (2018). https://doi.org/10.1016/j.dib.2018.05.008

    Article  Google Scholar 

  6. Palmer, J.: Mechanical Recycling of Automotive Composites for Use as Reinforcement in Thermoset Composites. PhD thesis, University of Exeter, pp. 224 (2009)

  7. Phoenix Fibreglass Inc: Fibreglass Composite Recycling: Report. Ministry of Environment and Energy, Ontario (1994)

    Google Scholar 

  8. Yazdanbakhsh, A., Bank, L.C., Rieder, K.A., et.al: Concrete with discrete slender elements from mechanically recycled wind turbine blades. Resour. Conserv. Recycl. 128, 11–21 (2018)

    Article  Google Scholar 

  9. Standard test method for compositional analysis by thermogravimetric, ASTM E1131-08 (2012)

  10. Xanthos, M.: Functional Fillers for Plastics. Wiley, Hoboken (2005). https://doi.org/10.1002/3527605096

    Book  Google Scholar 

  11. Srubar, W.V. III, Frank, C.W., Billington, S.L.: Modeling the kinetics of water transport and hydro expansion in a lignocellulose-reinforced bacterial copolyester. Polymer. 53, 2152–2161 (2012). https://doi.org/10.1016/j.polymer.2012.03.036

    Article  Google Scholar 

  12. Munder, S., Argyropoulos, D., Müller, J.: Acquisition of sorption and drying data with embedded devices: improving standard models for high oleic sunflower seeds by continuous measurements in dynamic systems. Agriculture 9(1), 1 (2019)

    Article  Google Scholar 

  13. Mamanpush, S.H., Li, H., Englund, K., Tabatabaei, A.T.: Dataset demonstrating physical properties of recycled wind turbine blade composites. Data Brief 20, 658–661 (2018)

    Article  Google Scholar 

Download references

Acknowledgements

The authors gratefully appreciate the financial support by Global Fiberglass Solutions Inc. Bothell, WA.

Author information

Authors and Affiliations

  1. Composite Materials and Engineering Center, Washington State University, Pullman, 99164-1806, WA, USA

    Seyed Hossein Mamanpush, Hui Li, Karl Englund & Azadeh Tavousi Tabatabaei

Authors
  1. Seyed Hossein Mamanpush
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hui Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Karl Englund
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Azadeh Tavousi Tabatabaei
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Seyed Hossein Mamanpush.

Ethics declarations

Conflict of interest

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mamanpush, S.H., Li, H., Englund, K. et al. Extruded Fiber-Reinforced Composites Manufactured from Recycled Wind Turbine Blade Material. Waste Biomass Valor 11, 3853–3862 (2020). https://doi.org/10.1007/s12649-019-00659-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12649-019-00659-0

Keywords

Search

Navigation