Abstract
The Air Force Research Laboratory Additive Manufacturing Modeling Challenge series launched in November 2019 was devised as a means to assess the Additive Manufacturing modeling community’s ability to predict, in a locally resolved fashion, details of the structure and subsequent mechanical performance of metallic materials fabricated with a laser powder bed fusion process. This communication gives a general overview of the challenge series implementation, results, and workshop.
Similar content being viewed by others
References
Groeber M, Schwalbach E, Musinski W, Shade P, Donegan S, Uchic M, Daniel S, Turner T, Miller J (2018) A preview of the US air force research laboratory additive manufacturing modeling challenge series. JOM 70:441–444
Chuang AC, Park J-S, Shade PA, Schwalbach EJ, Groeber MA, Musinski WD AFRL additive manufacturing modeling series: challenge 1, characterization of residual strain distributions in additively-manufactured metal parts using energy dispersive diffraction. Integr Mater Manuf Innov (In review)
Schwalbach EJ, Chapman MG, Groeber MA AFRL additive manufacturing modeling series: challenge 2, microscale process to structure data description. Integr Mater Manuf Innov (In review)
Musinski W et al AFRL additive manufacturing modeling series: challenge 3, macroscale structure to properties data description. Integr Mater Manuf Innov (In review)
Menasche DB, Musinski WD, Obstalecki M, Shah MN, Donegan SP, Bernier JV, Kenesei P, Park J-S, Shade PA AFRL additive manufacturing modeling series: challenge 4, microscale structure to properties data description—high energy diffraction microscopy. Integr Mater Manuf Innov (In review)
Chapman MG, Shah MN, Donegan SP, Scott JM, Menasche DB, Uchic MD AFRL additive manufacturing modeling series: challenge 4, 3D reconstruction of an IN625 high-energy diffraction microscopy sample using multi-modal serial sectioning. Integr Mater Manuf Innov (In review)
Shade PA, Blank B, Schuren JC, Turner TJ, Kenesei P, Goetze K, Suter RM, Bernier JV, Li SF, Lind J, Lienert U, Almer J (2015) A rotational and axial motion system load frame insert for in situ high energy x-ray studies. Rev Sci Instrum 86:093902. https://doi.org/10.1063/1.4927855
Uchic M, Groeber M, Shah M, Callahan P, Shiveley A, Scott M, Chalman M, Spowart J (2012) An automated multi-modal serial sectioning system for characterization of grain scale microstructures in engineering materials. In: proceedings of the 1st international conference on 3d materials science. https://doi.org/10.1007/978-3-319-48762-5_30
Musinski WD, Shade PA, Park J-S, Chuang AC, Schwalbach EJ, Miller JD, Groeber MA, Cox ME (2019) AFRL AM modeling challenge series: challenge 1 data package. Mater Data Facility. https://doi.org/10.18126/8jfl-i4d8
Groeber MA, Schwalbach EJ, Donegan SP, Uchic MD, Shade PA, Musinski WD, Miller J, Turner TJ, Sparkman D, Cox ME (2018) AFRL AM modeling challenge series: challenge 2 data package. Mater Data Facility. https://doi.org/10.18126/M27H1Z
Groeber M, Schwalbach E, Donegan S, Uchic M, Shade P, Musinski W, Miller J, Turner T, Sparkman D, Cox M (2019) AFRL AM modeling challenge series: challenge 3 data package. Mater Data Facility. https://doi.org/10.18126/M26639
Shade PA, Muskinski WD, Shah MN, Uchic MD, Donegan SP, Chapman MG, Park J-S, Bernier JV, Kenesei P, Menasche DB, Obstalecki M, Schwalbach EJ, Miller JD, Groeber MA, Cox ME (2019) AFRL AM modeling challenge series: challenge 4 data package. Mater Data Facility. https://doi.org/10.18126/K5R2-32IU
Cox M (2019) Air force research laboratory (AFRL) additive manufacturing (AM) modeling challenge series. Available: https://materials-data-facility.github.io/MID3AS-AM-Challenge/
Blaiszik B, Ward L, Schwarting M, Gaff J, Chard R, Pike D, Chard K, Foster I (2019) A data ecosystem to support machine learning in materials science. MRS Commun 9(4):1125–1133. https://doi.org/10.1557/mrc.2019.118
Blaiszik B, Chard K, Ananthakrishnan R, Tueke S, Foster I (2016) The materials data facility: data services to advance materials science research. JOM 8(68):2045–2052. https://doi.org/10.1007/s11837-016-2001-3
America Makes (2019) America makes and air force research laboratory announce an additive manufacturing modeling challenge series. Available: https://www.americamakes.us/america-makes-and-afrl-announce-am-modeling-challenge/. Accessed 25 Jan 2021
America Makes (2020) AFRL AM challenge series improved understanding of the internal structure and resultant performance of metallic components produced by AM. Available: https://www.americamakes.us/america-makes-and-air-force-research-laboratory-announce-awardees-of-the-additive-manufacturing-modeling-challenge-series/. Accessed 25 Jan 2021
Acknowledgements
The Materials and Manufacturing Directorate, Air Force Research Laboratory funded this work. The MDF work was performed under the following financial assistance award 70NANB19H005 from U.S. Department of Commerce, National Institute of Standards and Technology as part of the Center for Hierarchical Materials Design (CHiMaD).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Cox, M.E., Schwalbach, E.J., Blaiszik, B.J. et al. AFRL Additive Manufacturing Modeling Challenge Series: Overview. Integr Mater Manuf Innov 10, 125–128 (2021). https://doi.org/10.1007/s40192-021-00215-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40192-021-00215-6