Abstract
An experimental method in a real-working condition was conducted to collect acoustic emission (AE) signals emitted from cylinders of a large two-stroke low-speed marine diesel engine. Measurements were performed in an axial direction of the cylinder in medium-frequency (20–80 kHz) and high-frequency (100–900 kHz) ranges and in a vertical direction only in the medium-frequency range under two engine operating modes. The collected AE signals were analyzed in crank angle and crank angle–frequency domains. kurtosis and root mean square (RMS) parameters were employed to identify engine operating modes based on the obtained AE signals as well as investigate their characteristics. A fast Fourier transform (FFT) algorithm was also utilized to discover the frequency range of the AE signals. The results showed that only the AE signals generated by combustion processes, friction and wear, and exhaust valve opening (EVO) were partially detected. However, the AE signal radiated by the friction phenomenon was not apparent in the high-frequency range. Also, the combustion process had a strong influence on the remaining AE’s sources, especially in the axial direction of the medium-frequency range. Furthermore, the measurements should be implemented for the AE signals due to friction and wear in the medium and low frequencies; meanwhile, the combustion should be investigated in the frequency range of 200–300 kHz
Similar content being viewed by others
References
Yunusa-Kaltungo, A., Sinha, J.K., Elbhbah, K.: HOS analysis of measured vibration data on rotating machines with different simulated faults. In: Dalpiaz, G. (ed.) Advances in Condition Monitoring of Machinery in Non-Stationary Operations, pp. 81–89. Springer, Heidelberg (2014)
Ahmad, T.A., Alireza, M.: Fault detection of injectors in diesel engines using vibration time-frequency analysis. Appl. Acoust. 143, 48–58 (2018)
Kamal, J., Mohammadsadegh, M., Ruholla, J.M., Elaheh, R.: Misfire and valve clearance faults detection in the combustion engines based on a multi-sensor vibration signal monitoring. Measurements 128, 527–536 (2018)
Ning, D., Sun, C., Gong, Y., Zhang, Z., Hou, J.: Extraction of fault component from abnormal sound in diesel engines using acoustic signals. Mech. Syst. Signal Pr. 75, 544–555 (2016)
Albarbar, A., Gu, F., Ball, A.D.: Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement 43, 1376–1386 (2010)
Albarbar, A., Gu, F., Ball, A.D., Starr, A.: Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Appl. Acoust. 71, 1132–1141 (2010)
Grosse, C.U.: Introduction. In: Grosse, C.U., Ohtsu, M. (eds) Acoustic Emission Testing, pp 3–10. Springer, Heidelberg (2008)
Scruby, C.B.: An introduction to acoustic emission. J. Phys. E: Sci. Instrum. 20, 946–953 (1987)
Swindlehurst, W.E.: Acoustic emission – 1 introduction. Nondestruct. Test. 5, 152–158 (1973)
Elamin, F., Yibo, F., Fengshou, G., Andrew, B.: Diesel engine valve clearance detection using acoustic emission. Adv. Mech. Eng. 2, 1–7 (2010)
Jafari, S.M., Mehdigholi, H., Behzad, M.: Valve fault diagnosis in internal combustion engines using acoustic emission and artificial neural network. Shock Vib. 2014, 1–9 (2014)
Dykas, B., Harris, J.: Acoustic emission characteristics of a single cylinder diesel generator at various loads and with a failing injector. Mech. Syst. Signal Pr. 93, 397–414 (2017)
Lin, T.R., Tan, A.C.C., Mathew, J.: Condition monitoring and diagnosis of injector faults in a diesel engine using in-cylinder pressure and acoustic emission techniques. In: Law, S.S., Cheng, Li, Xia, Yong, & Su, Zhongqing (eds.) Dynamics for Sustainable Engineering, pp. 454–463. The Hong Kong Polytechnic University, Hong Kong Polytechnic University (2011)
Gill, J., Reuben, R.L., Steel, J.A., Asquith, J.: A study of small HSDI diesel engine fuel injection equipment faults using acoustic emission. J. Acoust. Emiss. 18, 1–6 (2000)
Wei, N., Gu, F., Wang, T., Li, G., Xu, Y., Yang, L., Ball, A.D.: Characterisation of acoustic emission for the frictional effect in engine using wavelets based multi-resolution analysis. In: 21st International Conference on Automation and Computing (ICAC), Glasgow, UK (2015)
Douglas, R.M., Steel, J.A., Reuben, R.L.: A study of the tribological behaviour of piston ring/cylinder liner interaction in diesel engines using acoustic emission. Tribol. Int. 39, 1634–1642 (2006)
Price, E.D., Lees, A.W., Friswell, M.I.: Detection of severe sliding and pitting fatigue wear regimes through the use of broadband acoustic emission. P. I. Mech. Eng. J.-J. Eng. 219, 85–98 (2005)
Shuster, M., Combs, D., Karrip, K., Burek, D.: Piston ring cylinder liner scuffing phenomenon studies using acoustic emission technique. In: CEC/SAE Spring Fuels & Lubricants Meeting and Exposition, Paris, France (2000)
Nivesrangsan, P., Steel, J.A.: Reuben RL : Source location of acoustic emission in diesel engines. Mech. Syst. Signal Pr. 21, 1103–1114 (2005)
Nivesrangsan, P., Steel, J.A., Reuben, R.L.: Acoustic emission mapping of diesel engines for spatially located time series - Part II: Spatial reconstitution. Mech. Syst. Signal Pr. 21, 1084–1102 (2005)
Robertson, A., Brown, E., Douglas, R., Nivesrangsan, P., Reuben, R.L., Steel, J.A.: Source identification using acoustic emission on large bore cylinder liners. In: 26th European Conference on Acoustic Emission Testing, Berlin, Germany (2004)
Dong, X.T., Nguyen, M.H., Lee, D.C.: Algorithm development for acoustic emission measurement in high-frequency ranges and its application on a large two-stroke marine diesel engine. Measurement 162, 1–13 (2020)
Fourier Transforms and the Fast Fourier Transform (FFT) Algorithm. http://www.cs.cmu.edu/afs/andrew/scs/cs/15-463/2001/pub/www/notes/fourier/fourier.pdf (2001). Accessed 12 March 2017
Fessler, J.: FFT algorithms – Chapter 6. https://web.eecs.umich.edu/~fessler/course/451/l/pdf/c6.pdf (2004). Accessed 21 May 2017
Zhu, J., Nostrand, T., Spiegel, C., Morton, B.: Survey of condition indicators for condition monitoring systems. In: Annual Conference of the Prognostics and Health Management Society, Texas, USA (2014)
Vecer, P., Kreidl, M., Smid, R.: Condition indicators for gearbox condition monitoring systems. Acta Polytech. 45, 35–43 (2005)
Pearson, K.R.: Skew variation—a rejoinder. Biometrika 4, 169–212 (1905)
Acknowledgments
The authors acknowledge that this work was supported by Vietnam Maritime University.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dong, X.T., Nguyen, M.H. Acoustic Emission Investigation on an Electronically Controlled Two-Stroke Low-Speed Marine Diesel Engine: in Axial and Vertical Directions. Acoust Aust 49, 53–67 (2021). https://doi.org/10.1007/s40857-020-00212-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40857-020-00212-3