Abstract
The kinetics of fracture of structural bonds in a unidirectional laminate package under the effect of tensile load is studied using acoustic emission (AE) combined with video recording. A correspondence between the fractures occurring at micro-, meso-, and macroscale levels of the laminate package and the location pulses thus recorded and their energy parameters, shape, and spectrum is determined. Data on testing of the new criterion parameters used in acoustic emission monitoring, including the frequency of registration of location pulses in energy clusters and their weight content, as well as the methods providing separation of location pulses into the clusters with similar spectra related to the same or similar types of acoustic emission events, are presented. The proposed parameters and structural-phenomenological approach implemented through dividing the entire array of acoustic-emission data into energy clusters make it possible to quantify the degree of destruction of structural bonds of structural material at all scale levels and predict the residual strength of the product. Fusion of the acoustic emission events recorded at different stages of specimen loading and images of video recording of damage accumulation and fracture of the structural bonds in a unidirectional laminate package revealed the correspondence between the fracture of the composite occurring at micro-, meso-, and macroscale levels, acoustic waves thus generated and location pulses, and their energy parameters, shape, and spectrum.
Similar content being viewed by others
REFERENCES
Problemy prochnosti, tekhnogennoi bezopasnosti i konstruktsionnogo materialovedeniya (Strength, Technogenic Safety, and Constructional Material Science), Makhutov, N.A., Matvienko, Yu.G., and Romanov, A.N., Eds., Moscow: Lenand, 2018.
Matvienko, Yu.G., Vasil’ev, I.E., Chernov, D.V., and Elizarov, S.V., Criterion parameters for assessing degradation of composite materials by acoustic emission testing, Russ. J. Nondestr. Test., 2018, vol. 54, no. 12, pp. 811–819.
Matvienko, Yu.G., Vasil’ev, I.E., Ivanov, V.I., and Elizarov, S.V., Acoustic-emission evaluation of the process of destruction of a composite material under tensile, compression, and cyclic loads, Russ. J. Nondestr. Test., 2016, vol. 52, no. 8, pp. 443–456.
Vasil’ev, I.E., Matvienko, Yu.G., Pankov, A.V., and Kalinin, A.G., The application of the method of early damage diagnostics in the research of the aviation panel, Zavod. Lab., Diagn. Mater., 2019, vol. 85, no. 6, pp. 40–56.
Matvienko, Yu.G., Vasil’ev, I.E., and Chernov, D.V., Diagnostics of fracture and damage with acoustic emission method, Privody Kompon. Mash., 2018, no. 5, pp. 13–18.
Matvienko, Yu.G., Vasil’ev, I.E., Chernov, D.V., and Pankov, A.V., Acoustic-emission monitoring of airframe failure under cyclic loading, Russ. J. Nondestr. Test., 2019, vol. 55, no. 8, pp. 570–580.
Saeedifar, M., Najafabadi, M.A., Zarouchas, D., Toudeshky, H.H., and Jalalvand, M., Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using acoustic emission, Composites, Part B, 2018, vol. 144, pp. 206–219.
Sause, M.G.R., Modeling of acoustic emission sources in fiber reinforced composites, Proc. Conf. “Progress in Acoustic Emission XVIII, JSNDI-23 & III AE, Kyoto, 2016, pp. 305–310.
Pashmforoush, F., Khamedi, R., Fotouhi, M., Hajikhani, M., and Ahmadi, M., Damage classification of sandwich composites using acoustic emission technique and k-means genetic algorithm, J. Nondestr. Eval., 2014, vol. 33, no. 4, pp. 481–492.
Hill, E.K., Foti, C.J., Leung, N.Y., and Palacios, A.E., Neural network burst prediction in tall graphite—epoxy vessels from acoustic emission data, J. Acoust. Emiss., 2012, vol. 30, pp. 167–179.
Mahil Loo, C.C., Sasikumar, T., and Suresh, S., Analysis of failure mode and fracture behavior by using acoustic parameter and artificial neural network, Eng. Res. Express, 2019, vol. 1, no. 1, pp. 1–15.
Crivelli, D., Guagliano, M., and Monici, A., Development of an artificial neural network processing technique for the analysis of damage evolution in pultruded composites with acoustic emission, Composites, Part B, 2014, vol. 56, pp. 948–959.
Li, L., Lomov, S.V., and Yan, X., Correlation of acoustic emission with optically observed damage in a glass epoxy woven laminate under tensile loading, Compos. Struct., 2015, vol. 123, pp. 45–53.
Saravanakumar, K. and Arumugam, V., Effect of milled glass fibers on quasi-static indentation and tensile behavior of tapered laminates under acoustic emission monitoring, Eng. Fract. Mech., 2018, vol. 201, pp. 36–46.
El Mahi, A., Daoud, H., Rebiere, J.-L., Gimenez, I., Taktak, M., and Haddar, M., Damage mechanisms characterization of flax fibers-reinforced composites with interleaved natural viscoelastic layer using acoustic emission analysis, J. Compos. Mater., 2019, vol. 53, no. 18, pp. 2623–2637.
Abusrea, M.R., Han, S.-W., Arakawa, K., and Choi, N.-S., Bending strength of CFRP laminated adhesive joints fabricated by vacuum-assisted resin transfer molding, Composites, Part B, 2019, vol. 156, pp. 8–16.
Stepanova, L.N., Bataev, V.A., and Chernova, V.V., Studying the failure of a CFRP sample under static loading by the acoustic-emission and fractography methods, Russ. J. Nondestr. Test., 2017, vol. 53, no. 6, pp. 422–429.
Stepanova, L.N., Ramazanov, I.S., and Chernova, V.V., A procedure for locating acoustic-emission signals during static testing of carbon composite samples, Russ. J. Nondestr. Test., 2015, vol. 51, no. 4, pp. 227–235.
Eaton, M., Holford, K., Featherston, C. and Pullin, R., Damage in carbon fibre composites: the discrimination of acoustic emission signals using frequency, J. Acoust. Emiss., 2007, vol. 25, no. 1, pp. 140–148.
Sause, M.G.R., Acoustic emission signal propagation in damaged composite structures, J. Acoust. Emiss.,2013, vol. 31, no. 1, pp. 1–18.
Brunner, A.J., Acoustic emission analysis for identification of damage mechanisms in fiber-reinforced polymer composites and structural integrity assessment: Selected examples and challenges, Proc. Conf. “Progress in Acoustic Emission XVIII,” JSNDI-23 & III AE, Kyoto, 2016, pp. 287–292.
Makhutov, N.A., Vasil’ev, I.E., Ivanov, V.I., and Chernov, D.V., Modeling of the unstable dangerous states under formation of a cone granulated glass, Probl. Bezop. Chrezvychainykh Situatsii, 2019, no. 1, pp. 3–24.
Funding
This work was supported by the Russian Science Foundation (project no. 18-19-00351).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by A. Muravev
Rights and permissions
About this article
Cite this article
Matvienko, Y.G., Vasil’ev, I.E. & Chernov, D.V. Study of the Fracture Kinetics of a Unidirectional Laminate Using Acoustic Emission and Video Recording. Inorg Mater 56, 1536–1550 (2020). https://doi.org/10.1134/S0020168520150145
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168520150145