Abstract
The necessity to study the solidification parameters upon modifying Al–Si alloys is shown. The solidification of cast aluminum alloys modified by rubidium with the aim of significant improvement of their mechanical properties is analyzed. For a comparison of the efficiency of treatment with rubidium, aluminum alloys are modified by a standard flux based on sodium salts. The phase transformation temperatures and the parameters that take into account the precipitation of a solid phase in the solidification range are determined.
Similar content being viewed by others
REFERENCES
N. A. Belov, Phase Composition of Commercial and Advanced Aluminum Alloys MISiS, Moscow, 2010).
A. I. Veinik, Theory of Solidification of Castings (Mashgiz, Moscow, 1960).
A. K. Dahle, K. Nogita, S. D. McDonald, C. Dinnis, and L. Lu, “Eutectic modification and microstructure development in Al–Si alloys,” Mater. Sci. Eng. A 413–414, 243–248 (2005).
S. Moniri and A. Shahani, “Chemical modification of degenerate eutectics: a review of recent advances and current issues,” J. Mater. Res. 34 (1), 20–34 (2019).
M. B. Altman, A. A. Lebedev, A. P. Polyanskii, and M. V. Chukhrov, Melting and Casting of Light Alloys (Metallurgizdat, Moscow, 1956).
G. B. Stroganov, V. A. Rotenberg, and G. B. Gershman, Aluminum–Silicon Alloys (Metallurgiya, Moscow, 1977).
S. Hegde and K. N. Prabhu, “Modification of eutectic silicon in Al–Si alloys,” J. Mater. Sci. 43 (9), 3009–3027 (2008).
S. Lu and A. Hellawell, “The mechanism of silicon modification in aluminum–silicon alloys: impurity induced twinning,” Met. Trans. A 18 (10), 1721–1733 (1987).
Metals Reference Book, Ed. by C. J. Smithells (Butterworths, London, 1976).
I. A. Petrov, A. P. Ryakhovskii, and A. D. Shlyaptseva, “Studying the modification of standard silumins by rubidium and cesium,” Tekhnol. Legk. Splavov, No. 4, 52–60 (2019).
I. A. Petrov, A. P. Ryakhovskii, and A. D. Shlyaptseva, “Analysis of retainment time of modifying ability of certain alkaline metal in molten silumin,” Tekhnol. Legk. Splavov, No. 3, 54–61 (2018).
L. F. Mondolfo, Aluminum Alloys: Structure and Properties (Butterworths, London, 1976).
I. A. Petrov, D. V. Berezhnoi, A. P. Ryakhovskii, and V. S. Moiseev, “Effect of modification on the solidification of Al–Si aluminum alloys,” Russ. Metall. (Metally), No. 2, 184–187 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by I. Moshkin
Rights and permissions
About this article
Cite this article
Petrov, I.A., Shlyaptseva, A.D. & Kvashnin, V.M. Solidification of Rubidium-Modified Cast Aluminum Alloys. Russ. Metall. 2021, 272–277 (2021). https://doi.org/10.1134/S0036029521030101
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029521030101