Abstract
The effect of the alkaloid extract of Taxus baccata (AETB) as a green inhibitor of carbon steel in 1M HCl solution, were assessed. It was found that the inhibition efficiency increased with the extract concentration and decreased with rising of temperature. The polarization curves revealed that the (AETB) acted as mixed type inhibitor. The extract was physisorbed on steel surface and obeys Langmuir’s model. Quantum chemical calculations and molecular dynamics simulation of the majority’s components existing in (AETB) were performed in order to correlate the electronic properties with their adsorption and inhibition behavior.
Similar content being viewed by others
REFERENCES
Gu, T., Chen, Z., Jiang, X., Zhou, L., Liao, Y., Duan, M., Wang, H., and Pu, Q., Corros. Sci., 2015, vol. 90, pp. 118–132.
Desimone, M., Gordillo, G., and Simison, S.N., Corros. Sci., 2011, vol. 53, no. 12, pp. 4033–4043.
Negm, N.A., Kandile, N.G., Badr, E.A., and Mohammed, M.A., Corros. Sci., 2012, vol. 65, pp. 94–103.
Abiola, O.K. and James, A., Corros. Sci., 2010, vol. 52, no. 2, pp. 661–664.
Alibakhshi, E., Ramezanzadeh, M., Bahlakeh, G., Ramezanzadeh, B., Mahdavian, M., and Motamedi, M., J. Mol. Liq., 2018, vol. 255, pp. 185–198.
El Hamdani, N., Fdil, R., Tourabi, M., Jama, C., and Bentiss, F., Appl. Surf. Sci., 2015, vol. 357, pp. 1294–1305.
El Ouadi, Y., Lahhit, N., Bouyanzer, A., Elmsellem, H., Majidi, L., Znini, M., Adbel-Rahman, I., Hammouti, B., El Mahi, B., and Costa, J., Int. J. Dev. Res., 2016, vol. 6, no. 2, pp. 6867–6874.
Hussin, M.H., Rahim, A.A., Ibrahim, M.N.M., and Brosse, N., Measurement, 2016, vol. 78, pp. 90–103.
Lecante, A., Robert, F., Blandinières, P., and Roos, C., Curr. Appl. Phys., 2011, vol. 11, no. 3, pp. 714–724.
Li, L., Zhang, X., Lei, J., He, J., Zhang, S., and Pan, F., Corros. Sci., 2012, vol. 63, pp. 82–90.
Raja, P.B., Qureshi, A.K., Rahim, A.A., Osman, H., and Awang, K., Corros. Sci., 2013, vol. 69, pp. 292–301.
Benahmed, M., Selatnia, I., Achouri, A., Laouer, H., Gherraf, N., and Akkal, S., Trans. Indian Inst. Met., 2015, vol. 68, no. 3, pp. 393–401.
Benahmed, M., Djeddi, N., Akkal, S., and Laouar, H., Int. J. Ind. Chem., 2016, vol. 7, no. 2, pp. 109–120.
Djeddi, N., Benahmed, M., Akkal, S., Laouer, H., Makhloufi, E., and Gherraf, N., Res. Chem. Intermed., 2015, vol. 41, no. 7, pp. 4595–4616.
Kalla, A., Benahmed, M., Djeddi, N., Akkal, S., and Laouer, H., Int. J. Ind. Chem., 2016, vol. 7, no. 4, pp. 419–429.
Jennewein, S. and Croteau, R., Appl. Microbiol. Biotechnol., 2001, vol. 57, nos. 1–2, pp. 13–19.
Wilson, C.R., Sauer, J.-M., and Hooser, S.B., Toxicon, 2001, vol. 39, nos. 2–3, pp. 175–185.
Küpeli, E., Erdemoğlu, N., Yeşilada, E., and Şener, B., J. Ethnopharmacol., 2003, vol. 89, nos. 2–3, pp. 265–270.
Ma, W., Park, G.L., Gomez, G.A., Nieder, M.H., Adams, T.L., Aynsley, J.S., Sahai, O.P., Smith, R.J., Stahlhut, R.W., and Hylands, P.J., J. Nat. Prod., 1994, vol. 57, no. 1, pp. 116–122.
Mroczek, T., Głowniak, K., and Hajnos, M., Biomed. Chromatogr., 2000, vol. 14, no. 8, pp. 516–529.
Djilani, A., Legseir, B., Soulimani, R., Dicko, A., and Younos, C., J. Braz. Chem. Soc., 2006, vol. 17, no. 3, pp. 518–520.
Obi–Egbedi, N., Essien, K., Obot, I., and Ebenso, E., Int. J. Electrochem. Sci., 2011, vol. 6, pp. 913–930.
Orubite, K. and Oforka, N., Mater. Lett., 2004, vol. 58, no. 11, pp. 1768–1772.
Verma, C., Quraishi, M., and Ebenso, E., Int. J. Electrochem. Sci., 2013, vol. 8, pp. 7401–7413.
Materials Studio, Revision 7.0, San Diego, CA: Accelrys, 2013.
Mohallem, J.R., de O. Coura, T., Diniz, L.G., de Castro, G., Assafrao, D., and Heine, T., J. Phys. Chem. A, 2008, vol. 112, no. 38, pp. 8896–8901.
Srivastava, V., Haque, J., Verma, C., Singh, P., Lgaz, H., Salghi, R., and Quraishi, M., J. Mol. Liq., 2017, vol. 244, pp. 340–352.
Lgaz, H., Salghi, R., Bhat, K.S., Chaouiki, A., and Jodeh, S., J. Mol. Liq., 2017, vol. 244, pp. 154–168.
Xu, B., Gong, W., Zhang, K., Yang, W., Liu, Y., Yin, X., Shi, H., and Chen, Y., J. Taiwan Inst. Chem. Eng., 2015, vol. 51, pp. 193–200.
Abderrahim, K., Selatnia, I., Sid, A., and Mosset, P., Chem. Phys. Lett., 2018, vol. 707, pp. 117–128.
Sun, H., J. Phys. Chem. B, 1998, vol. 102, no. 38, pp. 7338–7364.
Zhang, Z., Tian, N., Huang, X., Shang, W., and Wu, L., RSC Adv., 2016, vol. 6, no. 27, pp. 22250–22268.
Li, X., Deng, S., and Fu, H., Corros. Sci., 2012, vol. 62, pp. 163–175.
Bobina, M., Kellenberger, A., Millet, J.-P., Muntean, C., and Vaszilcsin, N., Corros. Sci., 2013, vol. 69, pp. 389–395.
El Bribri, A., Tabyaoui, M., Tabyaoui, B., El Attari, H., and Bentiss, F., Mater. Chem. Phys., 2013, vol. 141, no. 1, pp. 240–247.
Yaro, A.S., Khadom, A.A., and Wael, R.K., Alexandria Eng. J., 2013, vol. 52, no. 1, pp. 129–135.
Deng, S. and Li, X., Corros. Sci., 2012, vol. 55, pp. 407–415.
Goulart, C.M., Esteves–Souza, A., Martinez–Huitle, C.A., Rodrigues, C.J.F., Maciel, M.A.M., and Echevarria, A., Corros. Sci., 2013, vol. 67, pp. 281–291.
Deyab, M. and El-Rehim, S.A., J. Taiwan Inst. Chem. Eng., 2014, vol. 45, no. 3, pp. 1065–1072.
Ostovari, A., Hoseinieh, S., Peikari, M., Shadizadeh, S., and Hashemi, S., Corros. Sci., 2009, vol. 51, no. 9, pp. 1935–1949.
Lebrini, M., Robert, F., Lecante, A., and Roos, C., Corros. Sci., 2011, vol. 53, no. 2, pp. 687–695.
Tebbji, K., Faska, N., Tounsi, A., Oudda, H., Benkaddour, M., and Hammouti, B., Mater. Chem. Phys., 2007, vol. 106, no. 2–3, pp. 260–267.
Behpour, M., Ghoreishi, S., Khayatkashani, M., and Soltani, N., Mater. Chem. Phys., 2012, vol. 131, no. 3, pp. 621–633.
Hodaifa, G., Ochando-Pulido, J., Alami, S.B.D., Rodriguez-Vives, S., and Martinez-Ferez, A., Ind. Crops Prod., 2013, vol. 49, pp. 526–534.
Pournazari, S., Moayed, M.H., and Rahimizadeh, M., Corros. Sci., 2013, vol. 71, pp. 20–31.
Zarrok, H., Zarrouk, A., Hammouti, B., Salghi, R., Jama, C., and Bentiss, F., Corros. Sci., 2012, vol. 64, pp. 243–252.
Torres, V.V., Amado, R.S., De Sá, C.F., Fernandez, T.L., da Silva Riehl, C.A., Torres, A.G., and D’Elia, E., Corros. Sci., 2011, vol. 53, no. 7, pp. 2385–2392.
Hussin, M.H. and Kassim, M.J., Mater. Chem. Phys., 2011, vol. 125, no. 3, pp. 461–468.
Kumar, K.V., Pillai, M.S.N., and Thusnavis, G.R., J. Mater. Sci. Technol., 2011, vol. 27, no. 12, pp. 1143–1149.
Fouda, A. and Wahed, H.A., Arabian J. Chem., 2016, vol. 9, pp. S91–S99.
Kovačević, N. and Kokalj, A., Corros. Sci., 2011, vol. 53, no. 3, pp. 909–921.
Gece, G., Corros. Sci., 2008, vol. 50, no. 11, pp. 2981–2992.
Obot, I., Macdonald, D., and Gasem, Z., Corros. Sci., 2015, vol. 99, pp. 1–30.
Boshra, A., Bagheri, S., and Jadidi, S., Heteroat. Chem., 2013, vol. 24, no. 3, pp. 168–173.
Martinez, S., Mater. Chem. Phys., 2003, vol. 77, no. 1, pp. 97–102.
Lukovits, I., Kalman, E., and Zucchi, F., Corrosion, 2001, vol. 57, no. 1, pp. 3–8.
Selatnia, I. and Sid, A., J. New Technol. Mater., 2018, vol. 8, no. 1, pp. 120–125.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hanini, K., Benahmed, M., Boudiba, S. et al. Experimental and Theoretical Studies of Taxus Baccata Alkaloid Extract as Eco-Friendly Anticorrosion for Carbon Steel in Acidic Solution. Prot Met Phys Chem Surf 57, 222–233 (2021). https://doi.org/10.1134/S2070205120060118
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205120060118