Abstract
Electron beam (EB) irradiated wool was examined for sorption of chromic ions. Sorption increased with the adsorbed dose non-monotonously, which is a result of the generation of S-oxidized groups, secondary structure variation, and the breaking of the keratin backbone. For a dose of 400 kGy, an increase by 120 % was observed at the cystine dioxide and cysteine acid amounts. Examining sorption of unexposed wool and that irradiated with doses of 25 kGy and 40 kGy for basic, methylene blue (MB), or acidic, pyrogallol red (PR) dyes revealed that such low doses have no effect on the carboxylic or amino groups of keratin. Sorption of MB is independent of the EB treatment and is identical for both samples due to the interaction of MB amino groups with the carboxylic groups of wool; however, the sorption capacity for PR is a function of the EB treatment. The sample irradiated with the dose of 25 kGy showed higher PR sorption than that with the EB dose of 40 kGy, which was equal to that of unexposed wool. While the 25 kGy sample provided more active sites for PR interaction compared with the unexposed one, the 40 kGy sample contained already enough active sites to generate intra- and intermolecular interactions inside wool. Thus, PR adherence to the 40 kGy sample was restricted and comparable to the level of unexposed wool.
Similar content being viewed by others
References
Abreu, A. M., & Toffoli, S. M. (2009). Characterization of a chromium-rich tannery waste and its potential use in ceramics. Ceramics International, 35, 2225–2234. DOI: 10.1016/j.ceramint.2008.12.011.
Aluigi, A., Vineis, C., Tonin, C., Tonetti, C., Varesano, A., & Mazzuchetti, G. (2009). Wool keratin-based nanofibres for active filtration of air and water. Journal of Biobased Materials and Bioenergy, 3, 311–319. DOI: 10.1166/jbmb.2009. 1039.
Aluigi, A., Tonetti, C., Vineis, C., Tonin, C., & Mazzuchetti, G. (2011). Adsorption of copper(II) ions by keratin/PA6 blend nanofibres. European Polymer Journal, 47, 1756–1764. DOI: 10.1016/j.eurpolymj.2011.06.009.
Arai, T., Freddi, G., Colonna, G. M., Scotti, E., Boschi, A., Murakami, R., & Tsukada, M. (2001). Absorption of metal cations by modified B. mori silk and preparation of fabrics with antimicrobial activity. Journal ofApplied Polymer Science, 80, 297–303. DOI: 10.1002/1097-4628(20010411)80:2< 297::AID-APP1099> 3.0.CO;2-Z.
Atia, A. A., Donia, A. M., & Yousif, A. M. (2003). Synthesis of amine and thiol chelating resins and study of their interaction with zinc(II), cadmium(II) and mercury(II) ions in their aqueous solutions. Reactive and Functional Polymers, 56, 75–82. DOI: 10.1016/s1381-5148(03)00046-4.
Axelson, G., Hamrin, K., Fahlman, A., Nordling, C., & Lindberg, B. J. (1967). Electron spectroscopic evidence of the thiolsulphonate structure of cystine S-dioxide. Spectrochimica Acta Part A: Molecular Spectroscopy, 23, 2015–2020. DOI: 10.1016/0584-8539(67)80089-8.
Church, J. S., & Millington, K. R. (1996). Photodegradation of wool keratin: Part I. Vibrational spectroscopic studies. Biospectroscopy, 2, 249–258. DOI: 10.1002/(SICI)1520-6343(1996)2:4 <249::AID-BSPY6> 3.0.CO;2-1.
El-Sayed, H., Kantouch, A., & Raslan, W. M. (2004). Environmental and technological studies on the interaction of wool with some metal ions. Toxicological & Environmental Chemistry, 86, 141–146. DOI: 10.1080/02772240410001688233.
Evangelou, M. W. H., Ebel, M., Koerner, A., & Schaeffer, A. (2008). Hydrolysed wool: A novel chelating agent for metal chelant-assisted phytoextraction from soil. Chemosphere, 72, 525–531. DOI: 10.1016/j.chemosphere.2008.03.063.
Fabiani, C., Ruscio, F., Spadoni, M., & Pizzichini, M. (1997). Chromium(III) salts recovery process from tannery wastewaters. Desalination, 108, 183–191. DOI: 10.1016/s0011-9164(97)00026-x.
Freddi, G., Arai, T., Colonna, G. M., Boschi, A., & Tsukada, M. (2001). Binding of metal cations to chemically modified wool and antimicrobial properties of the wool-metal complexes. Journal of Applied Polymer Science, 82, 3513–3519. DOI: 10.1002/app.2213.
Ghosh, A., & Collie, S. R. (2014). Keratinous materials as novel absorbent systems for toxic pollutants. Defence Science Journal, 64, 209–221. DOI: 10.14429/dsj.64.7319.
Gotoh, T., Matsushima, K., & Kikuchi, K. I. (2004). Adsorption of Cu and Mn on covalently cross-linked alginate gel beads. Chemosphere, 55, 57–64. DOI: 10.1016/j.chemosphere.2003.10.034.
Hanzlíkova, Z., Braniša, J., Ondruška, J., & Porubská, M. (2016). The uptake and release of humidity by wool irradiated with electron beam. Journal of Central European Agriculture, accepted.
Hussain, T. (2012). Dyeing wool with acid dyes. Retrieved January 2, 2015, from http://www.academia.edu/2641253/Dyeing_Wool_with_Acid_Dyes
Kan, C. W., Chan, K., Yuen, C. W. M., & Miao, M. H. (1998). Surface properties of low-temperature plasma treated wool fabrics. Journal of Materials Processing Technology, 83, 180–184. DOI: 10.1016/s0924-0136(98)00060-0.
Kan, C. W., & Yuen, C. W. M. (2006). Surface characterisation of low temperature plasma-treated wool fibre. Journal of Materials Processing Technology, 178, 52–60. DOI: 10.1016/j.jmatprotec.2005.11.018.
Monier, M., Ayad, D. M., & Sarhan, A. A. (2010). Adsorption of Cu(II), Hg(II), and Ni(II) ions by modified natural wool chelating fibers. Journal of Hazardous Materials, 176, 348–355. DOI: 10.1016/j.jhazmat.2009.11.034.
Montgomery, M. A., & Elimelech, M. (2007). Water and sanitation in developing countries: Including health in the equation. Environmental Science & Technology, 41, 17–24. DOI: 10.1021/es072435t.
Oae, S., & Doi, J. T. (1991). Organic sulfur chemistry: Structure and mechanism. Boca Raton, FL, USA: CRC Press.
Pollard, S. J. T., Fowler, G. D., Sollars, C. J., & Perry, R. (1992). Low-cost adsorbents for waste and wastewater treatment: a review. Science of the Total Environment, 116, 31–52. DOI: 10.1016/0048-9697(92)90363-w.
Poole, A. J., Church, J. S., & Huson, M. G. (2009). Environmentally sustainable fibers from regenerated protein. Biomacromolecules, 10, 1–8. DOI: 10.1021/bm8010648.
Porubská, M., Hanzlíková, Z., Braniša, J., Kleinová, A., Hybler, P., Fülöp, M., Ondruška, J., & Jomová, K. (2015). The effect of electron beam on sheep wool. Polymer Degradation and Stability, 111, 151–158. DOI: 10.1016/j.polymdegradstab. 2014.11.009.
Radetić, M., Jocić, J., Jovančić, P., & Rajaković, L. (2004). Sorption properties of wool. Hemijska Industrija, 58, 315–321. DOI: 10.2298/hemind0408315r. (in Serbian)
Taddei, P., Monti, P., Freddi, G., Arai, T., & Tsukada, M. (2003). Binding of Co(II) and Cu(II) cations to chemically modified wool fibres: an IR investigation. Journal of Macromolecular Structure, 650, 105–113. DOI: 10.1016/s0022-2860(03)00147-9.
Tsukada, M., Arai, T., Colonna, G. M., Boschi, A., & Freddi, G. (2003). Preparation of metal-containing protein fibers and their antimicrobial properties. Journal of Applied Polymer Science, 89, 638–644. DOI: 10.1002/app.11911.
Xu, W. L., Shen, X. L., Wang, X., & Ke, G. Z. (2006). Effective methods for further improving the wool properties treated by corona discharge. Sen’i Gakkaishi, 62, 111–114. DOI: 10.2115/fiber.62.111.
Zhao, X., & He, J. X. (2011). Improvement in dyeability of wool fabric by microwave treatment. Indian Journal of Fibre & Textile Research, 36, 58–62.
Zheljazkov, V. D., Stratton, G. W., Pincock, J., Butler, S., Jeliazkova, E. A., Nedkov, N. K., & Gerard, P. D. (2009). Wool-waste as organic nutrient source for containergrown plants. Waste Management, 29, 2160–2164. DOI: 10.1016/j.wasman.2009.03.009.
Zoccola, M., Aluigi, A., & Tonin, C. (2009). Characterisation of keratin biomass from butchery and wool industry wastes. Journal of Molecular Structure, 938, 35–40. DOI: 10.1016/j.molstruc.2009.08.036.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hanzlíková, Z., Braniša, J., Hybler, P. et al. Sorption properties of sheep wool irradiated by accelerated electron beam. Chem. Pap. 70, 1299–1308 (2016). https://doi.org/10.1515/chempap-2016-0062
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1515/chempap-2016-0062