Skip to main content
SpringerLink
Log in

Preparation and evaluation of molding-type solid-phase extraction media binding with commercially available adhesives

  • Original Paper
  • Published:
Analytical Sciences Aims and scope Submit manuscript

Abstract

A fabrication method of molding-type solid-phase extraction media (M-SPEM) bound with commercially available adhesive is presented. Six pieces of M-SPEM were prepared by heating each kneaded product of a particulate sorbent and an adhesive inserted into a six-hole cylindrical mold for hardening under an open system and normal pressure. The particulate sorbent contained in M-SPEM was divinylbenzene-based reversed-phase mode solid-phase extractants that we have reported. An examination of several adhesives showed that the moldability of M-SPEM depended on the composition and properties of the adhesive. The optimized procedure can be used to prepare an M-SPEM containing an 85 wt% particulate sorbent (particulate sorbent/adhesive, 100 mg/17 mg; particle diameter, 90–150 µm), and the M-SPEM has a specific surface area of about 500 m2/g. The established procedure in this study can bind particulate sorbents together, which showed almost no reductions in the adsorption property and liquid permeability compared with those of the particulate sorbent.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. N. Fontanals, R.M. Marcé, F. Borrull, TrAC Trends Anal. Chem. 24, 394 (2005)

    Article  CAS  Google Scholar 

  2. A. Andrade-Eiroa, M. Canle, V. Leroy-Cancellieri, V. Cerdà, TrAC Trends Anal. Chem. 80, 641 (2016)

    Article  CAS  Google Scholar 

  3. C.F. Poole, TrAC Trends Anal. Chem. 22, 362 (2003)

    Article  CAS  Google Scholar 

  4. J. Płotka-Wasylka, N. Szczepańska, M. de la Guardia, J. Namieśnik, TrAC Trends Anal. Chem. 77, 23 (2016)

    Article  Google Scholar 

  5. N. Fontanals, R.M. Marcé, M. Galià, J. Polym. Sci. A 2004, 42 (2019)

    Google Scholar 

  6. A.W. Trochimczuk, M. Streat, B.N. Kolarz, React. Funct. Polym. 46, 259 (2001)

    Article  CAS  Google Scholar 

  7. J.C. Nadal, K.L. Anderson, S. Dargo, I. Joas, D. Salas, F. Borrull, P.A.G. Cormack, R.M. Marcé, N. Fontanals, J. Chromatogr. A 1626, 461348 (2020)

    Article  CAS  Google Scholar 

  8. V. Camel, Spectrochim. Acta Part B 58, 1177 (2003)

    Article  Google Scholar 

  9. S. Kagaya, T. Kajiwara, M. Gemmei-Ide, W. Kamichatani, Y. Inoue, Talanta 147, 342 (2016)

    Article  CAS  Google Scholar 

  10. Y. Inoue, Bunseki Kagaku 64, 811 (2015)

    Article  CAS  Google Scholar 

  11. O. Koji, S. Motomizu, Bunseki Kagaku 57, 291 (2008)

    Article  Google Scholar 

  12. Y. Inoue, W. Kamichatani, A. Yamamoto, Bunseki Kagaku 63, 79 (2014)

    Article  CAS  Google Scholar 

  13. Y. Inoue, W. Kamichatani, M. Saito, Y. Kobayashi, A. Yamamoto, Chromatographia 73, 849 (2011)

    Article  CAS  Google Scholar 

  14. N. Fontanals, F. Borrull, R.M. Marcé, J. Chromatogr. A 1609, 460531 (2020)

    Article  CAS  Google Scholar 

  15. P. Ivanov-Dobrev, M. Kamínek, J. Chromatogr. A 950, 21 (2002)

    Article  CAS  Google Scholar 

  16. H. Murakami, T. Aoyanagi, Y. Miki, H. Tomita, Y. Esaka, Y. Inoue, N. Teshima, Talanta 185, 427 (2018)

    Article  CAS  Google Scholar 

  17. H. Murakami, H. Tomita, T. Aoyanagi, T. Sugita, Y. Miki, Y. Esaka, Y. Inoue, N. Teshima, Anal. Chim. Acta 1075, 106 (2019)

    Article  CAS  Google Scholar 

  18. H. Tomita, T. Sugita, H. Murakami, Y. Esaka, Y. Inoue, N. Teshima, Bunseki Kagaku 69, 25 (2020)

    Article  CAS  Google Scholar 

  19. Y. Miki, H. Murakami, O. Miho, Y. Esaka, Y. Inoue, N. Teshima, Bunseki Kagaku 67, 445 (2018)

    Article  CAS  Google Scholar 

  20. H. Murakami, M. Omiya, Y. Miki, T. Umemura, Y. Esaka, Y. Inoue, N. Teshima, Talanta 217, 121052 (2020)

    Article  CAS  Google Scholar 

  21. H. Murakami, T. Sugiyama, Y. Miki, T. Umemura, Y. Esaka, Y. Inoue, N. Teshima, Anal. Sci. 36, 1185 (2020)

    Article  CAS  Google Scholar 

  22. H. Murakami, Y. Miki, Y. Inoue, N. Teshima, Bunseki Kagaku 70, 19 (2021)

    Article  CAS  Google Scholar 

  23. S. Kagaya, T. Katoh, M. Saito, M. Ohki, R. Shirota, Y. Saeki, T. Kajiwara, S. Nakada, H. Miyazaki, M. Gemmei-Ide, Y. Inoue, Talanta 188, 665 (2018)

    Article  CAS  Google Scholar 

  24. A. Namera, T. Saito, TrAC Trends Anal. Chem. 45, 182 (2013)

    Article  CAS  Google Scholar 

  25. D.F. Hagen, C.G. Markell, G.A. Schmitt, Anal. Chim. Acta 236, 157 (1990)

    Article  CAS  Google Scholar 

  26. E.M. Thurman, K. Snavely, TrAC Trends Anal. Chem. 19, 18 (2000)

    Article  CAS  Google Scholar 

  27. D. Barceló, S. Chiron, S. Lacorte, E. Martinez, J.S. Salau, M.C. Hennion, TrAC Trends Anal. Chem. 13, 352 (1994)

    Article  Google Scholar 

  28. T. Katoh, Y. Inoue, W. Kamichatani, M. Saito, S. Kagaya, A. Yamamoto, Bunseki Kagaku 61, 335 (2012)

    Article  CAS  Google Scholar 

  29. Y. Inoue, T. Kato, M. Saito, H. Yanai, Japan Patent, JP2010256225A (2009)

  30. C.L. Arthur, J. Pawliszyn, Anal. Chem. 62, 2145 (1990)

    Article  CAS  Google Scholar 

  31. E. Baltussen, P. Sandra, F. David, C. Cramers, J. Microcolumn Sep. 11, 737 (1999)

    Article  CAS  Google Scholar 

  32. S. Hjertén, L. Jia-Li, Z. Rong, J. Chromatogr. A 473, 273 (1989)

    Article  Google Scholar 

  33. H. Kobayashi, T. Ikegami, H. Kimura, T. Hara, D. Tokuda, N. Tanaka, Anal. Sci. 22, 491 (2006)

    Article  CAS  Google Scholar 

  34. T. Hara, H. Kobayashi, T. Ikegami, K. Nakanishi, N. Tanaka, Anal. Chem. 78, 7632 (2006)

    Article  CAS  Google Scholar 

  35. F. Svec, J.M.J. Fréchet, Anal. Chem. 64, 820 (1992)

    Article  CAS  Google Scholar 

  36. S. Xie, F. Svec, J.M.J. Fréchet, Chem. Mater. 10, 4072 (1998)

    Article  CAS  Google Scholar 

  37. X. Huang, L. Chen, L. Fuhua, D. Yuan, J. Sep. Sci. 34, 2145 (2011)

    CAS  PubMed  Google Scholar 

  38. Y. Miki, H. Murakami, K. Iida, T. Umemura, Y. Esaka, Y. Inoue, N. Teshima, Anal. Sci. 36, 1153 (2020)

    Article  CAS  Google Scholar 

  39. N. Teshima, H. Murakami, Y. Inoue, Y. Miki, Japan Patent, JP202130164A (2021)

  40. M.C. Hennion, J. Chromatogr. A 856, 3 (1999)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This study was partly supported by JSPS KAKENHI Grant no. 20K05571 (Grant-in-Aid for Scientific Research (C) for H.M.) and 19H02751 (Grant-in-Aid for Scientific Research (B) for N.T.). The authors would like to thank Enago (www.enago.jp) for the English language review.

Author information

Authors and Affiliations

  1. Department of Applied Chemistry, Aichi Institute of Technology, 1247 Yachigusa, Yakusa-cho, Toyota, 470-0392, Japan

    Yuta Miki, Hiroya Murakami, Keisuke Iida, Yoshinori Inoue & Norio Teshima

  2. School of Life Sciences, Tokyo University of Pharmacy and Life Sciences, 1432-1 Horinouchi, Hachioji, 192-0392, Japan

    Tomonari Umemura

  3. Gifu Pharmaceutical University, Daigaku-nishi, Gifu, 501-1196, Japan

    Yukihiro Esaka

Authors
  1. Yuta Miki
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hiroya Murakami
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Keisuke Iida
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Tomonari Umemura
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yukihiro Esaka
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yoshinori Inoue
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Norio Teshima
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Hiroya Murakami.

Additional information

Advance Publication Released Online by J-STAGE October 22, 2021.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Miki, Y., Murakami, H., Iida, K. et al. Preparation and evaluation of molding-type solid-phase extraction media binding with commercially available adhesives. ANAL. SCI. 38, 307–315 (2022). https://doi.org/10.2116/analsci.21P265

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.2116/analsci.21P265

Keywords

Search

Navigation