Abstract
Recent advances in device fabrication and energy harvesting technology combined with an increasing need for sustainable energy generation have encouraged the development of the micro-electro-mechanical (MEMS) energy harvesting model for floor vibrations presented herein. By calibrating arrays of MEMS energy harvesters in resonance with floor vibrations, building occupants become sustainable energy sources. Optimization of these harvesters to frequency ranges of floor vibrations, subsequent synchronization of harvester location to occupant flow and improved electromechanical modeling may result in an efficient, passive power source for low-demand applications independent of external environmental conditions.
A model of a floor-harvester system is developed, utilizing ambient floor vibration to excite MEMS energy harvesters via harmonic base translation. These devices then convert the mechanical vibrations to electrical power. Design considerations for piezoelectric-based energy harvesters inspired by MEMS-scale arrays are investigated. Single degree of freedom and distributed beam parameter electromechanical models are employed to predict performance, by optimization of resonant frequencies from measured low-level ambient vibrations. A simplified analytical expression for a frequency correction factor accounting for shear deformation and rotatory inertia effects is derived in terms of fundamental system parameters. Floor and energy harvesting device models are validated by comparison to experimental results and numerical modeling, respectively.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Murray TM, Allen DE, Ungar EE (1997) Floor vibrations due to human activity. AISC Steel Design Guide #11. American Institute of Steel Construction, Chicago
Miller LM, Halverson E, Dong T, Wright PK (2011) Modeling and experimental verification of low-frequency MEMS energy harvesting from ambient vibrations. J Micromech Microeng 21(1), 13pp, IOP Publishing
Galchev T, Kim H, Najafi K (2001) Micro power generator for harvesting low-frequency and nonperiodic vibrations. J Micromech Syst IEEE 24(4):852–866
Beeby SP, Torah RN, Tudor MJ, Glynne-Jones P, O’Donnell T, Saha CR, Roy S (2007) A micro electromagnetic generator for vibration energy harvesting. J Micromech Microeng 17(1):1257–1265, IOP Publishing
Tang X, Zuo L (2012) Vibration energy harvested from random force and motion excitations. Smart Mater Struct 21(1), 9pp, IOP Publishing
Cassidy IL, Scruggs JT, Behrens S (2011) Design of electromagnetic energy harvesters for large-scale structural vibration applications. Proc SPIE 7977(1), 11p
Raebel CH (2000) Development of an experimental protocol for floor vibration assessment. Master’s thesis, The Pennsylvania State University, University Park
Raebel CH, Hanagan LM, Trethewey MW (2001) Development of an experimental protocol for floor vibration assessment. In: Proceedings of IMAC-XIX: a conference on structural dynamics, Society for Experimental Mechanics, Bethel, 5–8 Feb 2001, pp 1126–1132
Hanagan LM, Murray TM (1997) Active control approach for reducing floor vibrations. J Struct Eng 123(11):1497–1505, ASCE
Pernica G (1990) Dynamic load factors for pedestrian movements and rhythmic exercises. Can Acoustics 18(2):3–18
Gu L (2011) Low-frequency piezoelectric energy harvesting prototype suitable for the MEMS implementation. Microelectron J 42(2):277–282
Kim HS, Kim JH, Kim J (2011) A Review of piezoelectric harvesting based on vibration. Int J Precis Eng Manuf 12(6):1129–1141, KSPE and Springer
Kruszewski E (1949) Effect of transverse shear and rotatory inertia on the natural frequency of a uniform beam. National Advisory Committee for Aeronautics Technical Note 1909, Langley Aeronautical Laboratory, Langley
Huang T (1961) The effect of rotatory inertia and of shear deformation on the frequency and normal mode equations of uniform beams with simple end conditions. J Appl Mech 28:579–584
Timoshenko S (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars. The London, Edinburgh and Dublin Philosophical Magazine and Journal of Science 41:744–746
Timoshenko S (1922) On the transverse vibrations of bars of uniform cross sections. The London, Edinburgh and Dublin Philosophical Magazine and Journal of Science 43:125–131
Schultz J, Raebel CH (2012) MEMS energy harvesting of ambient floor vibrations as sustainable power source. In: Proceedings, annual green energy summit, Milwaukee, 7 Mar 2012
Hopcroft M, Nix W, Kenny T (2010) What is the young’s modulus of silicon? J Microelectromech Syst 19:229–238
Schultz J (2012) Lateral-mode vibration of microcantilever-based sensors in viscous fluids using Timoshenko beam theory. Doctoral dissertation, Marquette University, Milwaukee
Lui H, Lee C, Kobayashi T, Tay TC, Quann C (2012) A new S-shaped MEMS PZT cantilever for energy harvesting from low frequency vibrations below 30Hz. Microsystems Technology, Springer, Technical Paper, 10p
Beeby SP, Tudor MJ, White NM (2006) Review article: energy harvesting vibration sources for microsystem applications. Meas Sci Technol 17(1):R175–R195, IOP Publishing
Acknowledgements
The prior research performed on the experimental floor system was supported in part by National Science Foundation Grant No. CMS-9900099. The authors wish to acknowledge the work completed by the principal investigator of that research initiative, Dr. Linda Hanagan.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Schultz, J.A., Raebel, C.H. (2013). Harvesting of Ambient Floor Vibration Energy Utilizing Micro-Electrical Mechanical Devices. In: Allemang, R., De Clerck, J., Niezrecki, C., Wicks, A. (eds) Special Topics in Structural Dynamics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-6546-1_59
Download citation
DOI: https://doi.org/10.1007/978-1-4614-6546-1_59
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-6545-4
Online ISBN: 978-1-4614-6546-1
eBook Packages: EngineeringEngineering (R0)