Abstract
The study of the effects produced by both, imbalance and misalignment in rotating machines, allow identifying the effects produced by these two phenomena under normal operating conditions of the equipment. Initially, an analysis is carried out using the wavelet transform, through the application of the LabVIEW and Matlab software; the goal was to compare these results with those obtained with the application of the Fourier transform. Additionally, a subsequent comparison of the results is carried out as a consequence of an initial comparison with an antecedent, where the Cepstrum-Fourier transformer and the Wavelet transform were applied to verify the existence of faults in a rotating machine. The present work is developed in order to determine which of these two studies represent these effects of misalignment and imbalance in a clear, specific, and/or significant way.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cheung, S., Das, R., Mo, J.: Demystifying Numerical Models Step-by Step Modeling of Engineering Systems. Butterworth Heinemann (2019)
Cárdenas, C., Sandoval, C., Gómez, J.: Implementación de una mesa vibratoria triaxial neumática para el análisis de estructuras y el movimiento sísmico, Rev. Colomb. Tecnol. Av. RCTA, vol. 2, no. 32, Art. no. 32, November 2018. https://doi.org/10.24054/16927257.v32.n32.2018.3032
Blanco-Ortega, A., Beltrán-Carbajal, F., Silva-Navarro, G., Méndez-Azúa, H.: Control de vibraciones en maquinaria rotatoria, Rev. Iberoam. Automática E Informática Ind. RIAI, vol. 7, no. 4, Art. no. 4, October 2010. https://doi.org/10.1016/s1697-7912(10)70058-3
Romero-Tarazona, B.E., Rodriguez-Sandoval, C.L., Villabonai-Ascanio, J.G., Rincón-Quintero, A.D.: Development of an artificial vision system that allows non-destructive testing on flat concrete slabs for surface crack detection by processing of digital images in MATLAB. In: IOP Conference Series Material Science Engineering, vol. 844, p. 012058, June 2020. https://doi.org/10.1088/1757-899x/844/1/012058
Nakamura, T., et al.: Flow-Induced Vibrations, 2nd Edition. Academic Press (2013)
Tarazona, B., Sandoval, C.: Evaluación de discontinuidades tipo grietas y fisuras en estructuras de hormigón empleando un analizador de vibraciones y procesamiento digital de imágenes. In: Entre Cienc. E Ing., vol. 13, p. 85, June 2019. https://doi.org/10.31908/19098367.4018
Armijos, L., José, F.: Señales acústicas y de vibración: estudio comparativo para la detección de severidad de fallos en engranes rectos, p. 134 (2019)
González, H.Á., Cardona, J. F., Monroy, G.A.: Diseño de un banco de pruebas de desalineamiento y desbalanceo mecanico. Sci. Tech., vol. 2, no. 28, Art. no. 28, ene. (2005). https://doi.org/10.22517/23447214.6827
Olarte, W., Botero Arbeláez, C.M., Cañon Zabaleta, B.: Técnicas de mantenimiento predictivo utilizadas en la industria. Sci. Tech., vol. 2, no. 45, Art. no. 45, ago. (2010). https://doi.org/10.22517/23447214.355
Bauer, B., Geropp, B., Seeliger, A.: Condition monitoring and predictive maintenance in mining industry using vibration analysis for diagnosis of gear boxes. IFAC Proceedings, vol. 30, no. 18, Art. no. 18, ago. (1997). https://doi.org/10.1016/s1474-6670(17)42529-8
Orhan, S., Akturk, N., Celik, V.: Vibration monitoring for defect diagnosis of rolling element - Technische Informationsbibliothek (TIB), vol. 39, no. 4, pp. 293–298 (2006)
Hurtado, J.E.R.: Analisis de vibraciones en equipos criticos de la industria azucarera trabajo de graduacion preparado para la facultad de ingenieria y arquitectura ingeniero mecanico, May 2020, Accedido: May 28, 2020. Disponible en. https://www.academia.edu/33077038/analisis_de_vibraciones_en_equipos_criticos_de_la_industria_azucarera_trabajo_de_graduacion_preparado_para_la_facultad_de_ingenieria_y_arquitectura_ingeniero_mecanico
White, G.: Introduccion-al-analisis-de-vibraciones-azima-dli.pdf, DLI. AZIMA DLI (2010)
Sanhueza, F.A.: Lozano, R.A., Duran, R.: Duran_Rivas_Ricardo.pdf, Pregrado, Universidad del Bio-Bio (2014)
Palomino Marin, E., La Medición, E., Análisis, D.: Vibraciones en el Diagnóstico de Máquinas Rotatorias, Cuba (1997)
Mosquera, G.: Las Vibraciones Mecanicas y Su Aplicacion Al Mantenimiento Predictivo, p. 205 (2018)
Alguindigue, I.E., Loskiewicz-Buczak, R.E., Uhrig, A.: Monitoring and diagnosis of rolling element bearings using artificial neural networks. IEEE Trans. Ind. Electron., 40(2), 2 (1993). https://doi.org/10.1109/41.222642
Sandoval Rodríguez, C.L., Barros, A., Herreño, S.: Clasificación automática de patrones de vibraciones mecánicas en maquinaria rotativa afectada por desbalanceo. INGEUAN - Tend. En Ing., vol. 4, no. 7, Art no. 7, October 2013. Accedido: jul. 26, 2020. [En línea]. Disponible en: http://csifesvr.uan.edu.co/index.php/ingeuan/article/view/255
Neale, M.: The Tribology Handbook, 2nd Edition (1995)
Pantelić, M., Jovančić, P., Ristić, L., Bebić, M.: Concrete base influence on the increased vibrations level of the mill drive system elements - a case study. Eng. Fail. Anal., 106, 104178 (2019). https://doi.org/10.1016/j.engfailanal.2019.104178
George, M., Balaji, J., Sajan, D., Dominic, P., Philip, R., Vinitha, G.: Synthesis and third order optical nonlinearity studies of toluidine tartrate single crystal supported by photophysical characterization and vibrational spectral analysis. J. Photochem. Photobiol. Chem., 393, 112413 (2020). https://doi.org/10.1016/j.jphotochem.2020.112413
Hashemnia, K., Pourandi, S.: Study the effect of vibration frequency and amplitude on the quality of fluidization of a vibrated granular flow using discrete element method. Powder Technol., 327, 335–345, March 2018. https://doi.org/10.1016/j.powtec.2017.12.097
Li, Z., He, Z., Zi, Y., Chen, X.: Bearing condition monitoring based on shock pulse method and improved redundant lifting scheme, vol. 79, no. 3, Art. no. 3 (2008). https://doi.org/10.1016/j.matcom.2007.12.004
de la Rosa, J.J.G., Agüera Pérez, A., Palomares Salas, J.C., Sierra Fernández, J.M.: A novel measurement method for transient detection based in wavelets entropy and the spectral kurtosis: an application to vibrations and acoustic emission signals from termite activity, Measurement, 68, 58–69, May 2015. https://doi.org/10.1016/j.measurement.2015.02.044
Fan, G., Li, J., Hao, H.: Vibration signal denoising for structural health monitoring by residual convolutional neural networks. Measurement, 157, 107651, June 2020. https://doi.org/10.1016/j.measurement.2020.107651
Randall, R.B.: A history of cepstrum analysis and its application to mechanical problems. Mech. Syst. Signal Process. 97, pp. 3–19 (2017). https://doi.org/10.1016/j.ymssp.2016.12.026
Shi, D., He, D., Wang, Q., Ma, C., Shu, H.: Free vibration analysis of closed moderately thick cross-ply composite laminated cylindrical shell with arbitrary boundary conditions. Materials, 13(4), 4 (2020). https://doi.org/10.3390/ma13040884
Sandoval Rodriguez, C.L.S., Tarazona, B.E., Arias, C.G.C., Javier Gonzalo Ascanio, V., Jhon Jairo Valencia, N.: Detection of structural alterations in metal bodies: an approximation using Fourier transform and principal component analysis (PCA), Sci. Tech., vol. 25, no. 2, Art. no. 2, June 2020. https://doi.org/10.22517/23447214.23501
Liu, Z., Zhang, L., Carrasco, J.: Vibration analysis for large-scale wind turbine blade bearing fault detection with an empirical wavelet thresholding method. Renew. Energy, 46, 99–110 (2020). https://doi.org/10.1016/j.renene.2019.06.094
Sandoval-Rodriguez, C.L., Villabona, J.G.A., Cárdenas-Arias, C.G., Rincon-Quintero, A.D., Tarazona-Romero, B.E.: Characterization of the mechanical vibration signals associated with unbalance and misalignment in rotating machines, using the cepstrum transformation and the principal component analysis. In: IOP Conference Series Material Science Engineering, vol. 844, p. 012057, June 2020. https://doi.org/10.1088/1757-899x/844/1/012057
Sandoval Rodríguez, C.L., Cardenas, C.G.C., Rincón-Quintero, A.D., Zanguña, J.A.: Extracción de rangos característicos a las condiciones de desbalanceo y desalineación en máquinas rotativas a partir de coeficientes cepstrum. presentado en V Convención internacional de la ingenieria en Cuba, Cuba, 2018, [En línea]. Disponible en: http://repositorio.uts.edu.co:8080/xmlui/bitstream/handle/123456789/887/Certificado%20Ponente.pdf?sequence=1&isAllowed=y
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Sandoval-Rodriguez, C.L., Tarazona-Romero, B.E., Lengerke-Perez, O., Cárdenas-Arias, C.G., Dulcey Diaz, D.C., Acosta Cárdenas, O.A. (2021). Descriptive Study of a Rotary Machine Affected by Misalignment and Imbalance Applying the Wavelet Transform. In: Botto Tobar, M., Cruz, H., Díaz Cadena, A. (eds) Recent Advances in Electrical Engineering, Electronics and Energy. CIT 2020. Lecture Notes in Electrical Engineering, vol 763. Springer, Cham. https://doi.org/10.1007/978-3-030-72212-8_17
Download citation
DOI: https://doi.org/10.1007/978-3-030-72212-8_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-72211-1
Online ISBN: 978-3-030-72212-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)