Abstract
A modularised and small machine tool concept developed within a six year research programme allows for a new changeability in production. For a suitable, quick, easy and precise (re)configuration of those developed modules to a complete machine tool, an interface is required. This interface shall provide mechanical positioning as well as the transfer of electrical energy and information. Additional intelligence and safety features shall be integrated. Besides the product development of this multifunctional coupling a scientific approach for the development itself as well as to cope with constantly changing external requirements inflicted by the research partners is presented within this contribution.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
The frame interface is described in chapter “Modularly Structured, (Re-)Configurable Machines for Micro Machining by Means of Cooperative Motion Generation”, this contribution focuses on the module interface.
- 2.
- 3.
Experimental setup and procedure as well as detailed results are described in [13].
- 4.
Test travel of the feed module, detailed procedure and results are described in [13].
References
Schenk, M., Wirth, S.: Fabrikplanung und Fabrikbetrieb. Methoden für die wandlungsfähige und vernetzte Fabrik. Springer, Berlin (2004)
Schuh, G., Harre, J., Gottschalk, S., Kampker, A.: Design for Changeability (DFC)—Das richtige Maß an Wandlungsfähigkeit finden. Ergebnisse eines EU-Verbundforschungsprojektes, Modular Plant Architecture. In: wt Werkstatttechnik online, 94(4) 100–106 (2004)
Hildebrand, T.: Theoretische Grundlagen der bausteinbasierten, technischen Gestaltung wandlungsfähiger Fabrikstrukturen nach dem PLUG- + -PRODUCE-Prinzip, Band 45 Wissenschaftliche Schriftreihe des Institutes für Betriebswissenschaft und Fabriksysteme/ Technische Universität Chemnitz-Zwickau, Chemnitz (2005)
Nyhuis, P., Fronia, P., Pachow-Frauenhofer, J.: Wandlungsfähige Produktionssysteme. Ergebnisse der BMBF-Vorstudie „Wandlungsfähige Produktionssysteme“. In: wt Werkstatttechnik online, 99(4) 205–210 (2009)
Wörn, A.: Ein Beitrag zur Gestaltung mechanischer Modulschnittstellen für rekonfigurierbare Mehrtechnologie-Werkzeugmaschinen. Schriftreihe des PTW: „Innovation Fertigungstechnik“. Shaker, Aachen (2009)
Li, H., Landers, R., Kota, S.: A review of feasible joining methods for reconfigurable machine tool components. In: International Conference on New Technological Innovation for the 21st Century, Japan-USA Symposium on Flexible Automation, pp. 381–388. American Society of Mechanical Engineers (ASME), New York (2000)
Rothenhofer, G., Slocum, A., Kitajima, T.: An adjustable kinematic coupling for use in machine tools with tight structural loop. Precis. Eng. 37(1), 61–72 (2013)
Abele, E., Wörn, A., Fleischer, J., Wiese, J., Martin, P., Klöpper, R.: Mechanical module interfaces for reconfigurable machine tools. Prod. Eng. Res. Devel. 1(4), 421–428 (2007)
Menschig, A.: Modulare Kleinstfabrik. Ergebnisbericht des BMBF-Verbundprojektes ProFaM. Bayrisches Laserzentrum, Erlangen, Produktionslinie für miniaturisierte Naugruppen (2008)
Böger, F.H.: Herstellerübergreifende Konfigurierung modularer Werkzeugmaschinen. Band 462 von Fortschrittberichte VDI-Reihe 2, Fertigungstechnik VDI Verl, Düsseldorf (1998)
Wulfsberg, J.P., Grimske, S., Kohrs, P., Kong, N.: Kleine Werkzeugmaschinen für kleine Werkstücke - Zielstellungen und Vorgehensweise des DFG-Schwerpunktprogramms 1476. In: wt Werkstattstechnik online, Jahrgang, Ausgabe 11/12-2010, Seite 886−891 (2010)
VDI 2206, Verein Deutscher Ingenieure: Entwicklungsmethodik für mechatronische Systeme, (2004)
Grimske, S.: Multifunktionale Schnittstellen für kleine modulare Werkzeugmaschinen. Shaker Verlag, Dissertation (2014)
Slocum, A.H.: Kinematic couplings for precision fixturings—Part I: Formulation of design parameters. Precis. Eng. 10(2), 85–91 (1988)
Wulfsberg, J.P., Grimske, S., Kong, N., Röhlig, B., Storjohann, J., Müller, J.: A function integrated and intelligent mechanical interface for small modular machine tools. Precis. Eng. 38(1), 109–115 (2014)
Bödrich, T.: Electromagnetic Actuator Modelling with the Extended Modelica Magnetic Library. In: Conference Proceedings of Modelica 2008 (2008)
DIN 66001, Deutsches Institut für Normung, Informationsverarbeitung – Sinnbilder und ihre Anwendung (1983)
Gausemeier, J., Ebbermeyer, P., Kallmeyer, F.: Produktinnovation. Strategische Planung und Entwicklung der Produkte von moregn. Hanser, Munich (2001)
Slocum, A.H.: Precision Machine Design. Prentice Hall, Englewood Cliffs and N.J. (1992)
Schmidt, K.H.: Mikrofräswerkzeuge aus Hartmetall. Systeme für Herstellung und Anwendung. Dissertation (2006)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Grimske, S., Röhlig, B., Müller, J., Wulfsberg, J.P. (2017). Multifunctional and Intelligent Mechanical Interface for a Fast, Easy and Precise (Re-)Configuration of Small Modular Machine Tools. In: Wulfsberg, J., Sanders, A. (eds) Small Machine Tools for Small Workpieces. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-49269-8_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-49269-8_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49267-4
Online ISBN: 978-3-319-49269-8
eBook Packages: EngineeringEngineering (R0)