Skip to main content
SpringerLink
Log in

Interface Mechanical Properties in Energetic Materials Using Nanoscale Impact Experiment and Nanomechanical Raman Spectroscopy

  • Chapter
  • First Online:
Nano-Energetic Materials

Part of the book series: Energy, Environment, and Sustainability ((ENENSU))

Abstract

Energetic materials are sensitive to mechanical shock and defects caused by a high-velocity impact may result in unwanted detonation due to hot-spot formation. In order to understand the underlying mechanism, characterization of high strain-rate mechanical properties needs to be studied. One of the key factors that can contribute to this type of defect is the failure initiated at the interfaces such as those between Hydroxyl-terminated polybutadiene (HTPB) and Cyclo-tetra-methylene-tetra-nitramine (HMX) (or HTPB and Ammonium Perchlorate (AP)). In this work, interface mechanical properties of HTPB-HMX and HTPB-AP interfaces are characterized using nanoscale dynamic impact experiments at strain rates up to 100 s−1. The binding agent was added to the mixture in order to analyze the effect of chemical composition on the interfacial mechanical properties. For HTPB-AP sample, Tepanol is used as the binding agent and for HTPB-HMX sample, Dantocol was used as the binding agent. The impact response is determined in the bulk HTPB, HMX, and AP as well as at the HTPB-HMX and HTPB-AP interfaces. A strain-rate-dependent viscoplastic power law-based constitutive model was obtained by fitting the experimental stress–strain–strain-rate data. The effect of binding agent on interface level failure properties was studied using an in situ nanomechanical Raman spectroscopy (NMRS) setup.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 139.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 179.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  • Anastassakis E et al (1970) Effect of static uniaxial stress on the Raman spectrum of silicon. Solid State Commun 8(2):133–138

    Article  CAS  Google Scholar 

  • Barua A, Zhou M (2011) A Lagrangian framework for analyzing microstructural level response of polymer-bonded explosives. Modell Simul Mater Sci Eng 19(5):055001

    Article  Google Scholar 

  • Barua A, Horie Y, Zhou M (2012) Microstructural level response of HMX-Estane polymer-bonded explosive under effects of transient stress waves. Proc R Soc A Math Phys Eng Sci 468(2147):3725–3744

    Article  CAS  Google Scholar 

  • Benson DJ, Conley P (1999) Eulerian finite-element simulations of experimentally acquired HMX microstructures. Model Simul Mater Sci Eng 7:333–354

    Article  Google Scholar 

  • Brill T, Goetz F (1976) Laser Raman studies of solid oxidizer behavior. In: AIAA 14th aerospace sciences meeting. American Institute of Aeronauticcs and Astronautics, Washington, D.C.

    Google Scholar 

  • Buback M, Schulz KR (1976) Raman scattering of pure ammonia to high pressures and temperatures. J Phys Chem 80(22):2478–2482

    Article  CAS  Google Scholar 

  • Cady CM et al (2006) Mechanical properties of plastic-bonded explosive binder materials as a function of strain-rate and temperature. Polym Eng Sci 46(6):812–819

    Article  CAS  Google Scholar 

  • Chakraborty T, Khatri SS, Verma AL (1986) Temperature-dependent Raman study of ammonium perchlorate single crystals: The orientational dynamics of the NH4+ ions and phase transitions. J Chem Phys 84(12):7018

    Article  CAS  Google Scholar 

  • Chen P, Zhou Z, Huang F (2011) Macro-micro mechanical behavior of a highly-particle-filled composite using digital image correlation method. In: Tesinova P (ed) Advances in composite materials—analysis of natural and man-made materials. InTech

    Google Scholar 

  • De Wolf I (1996) Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits. Semicond Sci Technol 11:139–154

    Article  Google Scholar 

  • Drodge DR et al (2009) The effects of particle size and separation on Pbx deformation, pp 1381–1384

    Google Scholar 

  • Fell NF et al (1995) Fourier transform Raman (FTR) spectroscopy of some energetic materials and propellant formulations II. Army Research Laboratory, Aberdeen Proving Ground, MD, p 34

    Google Scholar 

  • Gan M, Tomar V (2014) An in situ platform for the investigation of Raman shift in micro-scale silicon structures as a function of mechanical stress and temperature increase. Rev Sci Instrum 85(1)

    Article  Google Scholar 

  • Khasainov BA et al (1997) On the effect of grain size on shock sensitivity of heterogeneous high explosives. Shock Waves 7:89–105

    Article  Google Scholar 

  • Kimura E, Oyumi Y (1998) Shock instability test for azide polymer propellants. J Energ Mater 16(2–3):173–185

    Article  CAS  Google Scholar 

  • Lin Y et al (2008) Raman spectroscopy study of ammonia borane at high pressure. J Chem Phys 129(23):234509

    Article  Google Scholar 

  • Nallasamy P, Anbarasan PM, Mohan S (2002) Vibrational spectra and assignments of cis- and trans-1,4- polybutadiene. Turk J Chem 26:105–111

    CAS  Google Scholar 

  • Olokun AM et al (2018) Interface chemistry dependent mechanical properties in energetic materials using nano-scale impact experiment. In: SEM annual conference. Springer, Greenville

    Google Scholar 

  • Palmer SJP, Field JE, Huntley JM (1993) Deformation, strengths and strains to failure of polymer bonded explosives. Proc R Soc A Math Phys Eng Sci 440:399–419

    Article  CAS  Google Scholar 

  • Peiris SM, Pangilinan GI, Russell TP (2000) Structural properties of ammonium perchlorate compressed to 5.6 GPa. J Phys Chem A 104:11188–11193

    Article  CAS  Google Scholar 

  • Prakash C et al. (2017) Strain rate dependent failure of interfaces examined via nanoimpact experiments. In: Challenges in mechanics of time dependent materials, vol 2: Conference Proceedings of the Society for Experimental Mechanics Series

    Google Scholar 

  • Prakash C et al (2018a) Effect of interface chemistry and strain rate on particle-matrix delamination in an energetic material. Eng Fract Mech 191:46–64

    Article  Google Scholar 

  • Prakash C et al (2018b) Effect of interface chemistry and strain rate on particle-matrix delamination in an energetic material. Eng Fract Mech 191C:46–64

    Article  Google Scholar 

  • Rae PJ et al (2002a) Quasi-static studies of the deformation and failure of β-HMX based polymer bonded explosives. Proc R Soc A Math Phys Eng Sci 458:743–762

    Article  CAS  Google Scholar 

  • Rae PJ et al (2002b) Quasi-static studies of the deformation and failure of PBX 9501. Proc R Soc A Math Phys Eng Sci 458:2227–2242

    Article  CAS  Google Scholar 

  • Stacer RG, Husband M (1990) Small deformation viscoelastic response of gum and highly filled elastomers. Rheol Acta 29:152–162

    Article  CAS  Google Scholar 

  • Stacer RG, Hubner C, Husband M (1990) Binder/filler interaction and the nonlinear behavior of highly-filled elastomers. Rubber Chem Technol 63(4):488–502

    Article  CAS  Google Scholar 

  • Tan H (2012) The cohesive law of particle/binder interfaces in solid propellants. Prog Propuls Phys 2:59–66

    Google Scholar 

  • Tan H et al (2005a) The cohesive law for the particle/matrix interfaces in high explosives. J Mech Phys Solids 53(8):1892–1917

    Article  CAS  Google Scholar 

  • Tan H et al (2005b) The Mori-Tanaka method for composite materials with nonlinear interface debonding. Int J Plast 21(10):1890–1918

    Article  CAS  Google Scholar 

  • Tan H, Huang Y, Liu C (2008) The viscoelastic composite with interface debonding. Compos Sci Technol 68(15–16):3145–3149

    Article  CAS  Google Scholar 

  • Verma D, Exner M, Tomar V (2016) An investigation into strain rate dependent constitutive properties of a sandwiched epoxy interface. Mater Des 112:345–356

    Article  CAS  Google Scholar 

  • Verma D, Prakash C, Tomar V (2017) Properties of material interfaces: dynamic local versus nonlocal. In: Voyiadjis G (ed) Handbook of nonlocal continuum mechanics for materials and structures. Springer, Cham, pp 1–16

    Google Scholar 

  • Verma D, Prakash C, Tomar V (2017b) Interface mechanics and its correlation with plasticity in polycrystalline metals, polymer composites, and natural materials. Procedia Eng 173:1266–1274

    Article  Google Scholar 

  • Wiegand JH (1961) Study of mechanical properties of solid propellant. Armed Forces Technical Information Agency, Arlington

    Book  Google Scholar 

  • Wu X et al (2007) Micro-Raman spectroscopy measurement of stress in silicon. Microelectron J 38(1):87–90

    Article  Google Scholar 

  • Yeager JD (2011) Microstructural characterization of simulated plastic bonded explosives, in mechanical and materials engineering. Washington State University, Washington

    Google Scholar 

Download references

Acknowledgements

This research was supported by US-AFoSR Grant FA9550-15-1-0202 (Program Manager Dr. Martin Schmidt).

Author information

Authors and Affiliations

  1. School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN, 47907, USA

    Chandra Prakash, Ayotomi Olokun & Vikas Tomar

  2. School of Mechanical Engineering, Purdue University, West Lafayette, IN, 47907, USA

    I. Emre Gunduz

Authors
  1. Chandra Prakash
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ayotomi Olokun
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. I. Emre Gunduz
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Vikas Tomar
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Vikas Tomar .

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, Indian Institute Of Technology Kanpur, Kanpur, Uttar Pradesh, India

    Shantanu Bhattacharya

  2. Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India

    Avinash Kumar Agarwal

  3. Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Tamil Nadu, India

    T. Rajagopalan

  4. Department of Mechanical Engineering, Govind Ballah Pant Institute of Engineering and Technology, Pauri, Uttarakhand, India

    Vinay K. Patel

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Singapore Pte Ltd.

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Prakash, C., Olokun, A., Emre Gunduz, I., Tomar, V. (2019). Interface Mechanical Properties in Energetic Materials Using Nanoscale Impact Experiment and Nanomechanical Raman Spectroscopy. In: Bhattacharya, S., Agarwal, A., Rajagopalan, T., Patel, V. (eds) Nano-Energetic Materials. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3269-2_13

Download citation

Publish with us

Policies and ethics

Search

Navigation