Abstract
This paper is dedicated to investigate the explicit Lagrangian topological optimization for stress-constrained problems with global and local volume constraints. In most of the works in the state of the art, the global volume constraints were chosen as the main constraint of the optimization formulation. However, in many of the industrial applications such as in automotive engineering, some packaging regulations may lead to local volume constraints which should be considered in optimization formulation. In this research, a low-dimensional explicit parametrization approach called moving morphable components is coupled with mathematical programming to solve the aforementioned problem. The large-scale stress constraint is handled with aggregation techniques. The results of this paper are presented in some famous benchmark problems with different local volume constraints. It is demonstrated that local volume constrained can be easily handled with this approach. The present approach can be more effective in solving real engineering problems with packaging constraints in comparison with the traditional methods.
Similar content being viewed by others
References
Bai, J., Zuo, W.: Hollow structural design in topology optimization via moving morphable component method. Struct. Multidiscip. Optim. 61(1), 187–205 (2020)
Bendsøe, M.P., Sigmund, O.: Material interpolation schemes in topology optimization. Arch. Appl. Mech. 69(9–10), 635–654 (1999)
Bujny, M., Aulig, N., Olhofer, M., Duddeck, F.: Evolutionary crashworthiness topology optimization of thin-walled structures. ASMO UK, Munich (2016)
Bujny, M., Aulig, N., Olhofer, M., Duddeck, F.: Evolutionary level set method for crashworthiness topology optimization. In: ECCOMAS Congress (2016)
Bujny, M., Aulig, N., Olhofer, M., Duddeck, F.: Identification of optimal topologies for crashworthiness with the evolutionary level set method. Int. J. Crashworthiness 23(4), 395–416 (2018)
Cheng, L., Bai, J., To, A.C.: Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints. Comput. Methods Appl. Mech. Eng. 344, 334–359 (2019)
Chu, S., Gao, L., Xiao, M., Luo, Z., Li, H., Gui, X.: A new method based on adaptive volume constraint and stress penalty for stress-constrained topology optimization. Struct. Multidiscip. Optim. 57(3), 1163–1185 (2018)
Collet, M., Noël, L., Bruggi, M., Duysinx, P.: Topology optimization for microstructural design under stress constraints. Struct. Multidiscip. Optim. 58(6), 2677–2695 (2018)
Deng, J., Chen, W.: Design for structural flexibility using connected morphable components based topology optimization. Sci. China Technol. Sci. 59(6), 839–851 (2016)
Deng, J., Pedersen, C.B., Chen, W.: Connected morphable components-based multiscale topology optimization. Front. Mech. Eng. 14(2), 129–140 (2019)
Duysinx, P., Bendsøe, M.P.: Topology optimization of continuum structures with local stress constraints. Int. J. Numer. Meth. Eng. 43(8), 1453–1478 (1998)
Duysinx, P., Sigmund, O.: New developments in handling stress constraints in optimal material distribution. In: 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, p. 4906 (1998)
Emmendoerfer, H., Jr., Silva, E.C.N., Fancello, E.A.: Stress-constrained level set topology optimization for design-dependent pressure load problems. Comput. Methods Appl. Mech. Eng. 344, 569–601 (2019)
Fan, Z., Xia, L., Lai, W., Xia, Q., Shi, T.: Evolutionary topology optimization of continuum structures with stress constraints. Struct. Multidiscip. Optim. 59(2), 647–658 (2019)
Gong, S.G., Du, J.X., Liu, X., Xie, G.L., Zhang, J.P.: Study on topology optimization under multiple loading conditions and stress constraints based on efg method. Int. J. Comput. Methods Eng. Sci. Mech. 11(6), 328–336 (2010)
Gong, S.G., Wei, Y.B., Xie, G.L., Zhang, J.P.: Study on topology optimization method of particle moving based on element-free Galerkin method. Int. J. Comput. Methods Eng. Sci. Mech. 19(5), 305–313 (2018)
Guo, X., Zhang, W., Zhang, J., Yuan, J.: Explicit structural topology optimization based on moving morphable components (mmc) with curved skeletons. Comput. Methods Appl. Mech. Eng. 310, 711–748 (2016)
Guo, X., Zhang, W., Zhong, W.: Doing topology optimization explicitly and geometrically—a new moving morphable components based framework. J. Appl. Mech. 81(8) (2014)
Guo, X., Zhang, W., Zhong, W.: Stress-related topology optimization of continuum structures involving multi-phase materials. Comput. Methods Appl. Mech. Eng. 268, 632–655 (2014)
Guo, X., Zhou, J., Zhang, W., Du, Z., Liu, C., Liu, Y.: Self-supporting structure design in additive manufacturing through explicit topology optimization. Comput. Methods Appl. Mech. Eng. 323, 27–63 (2017)
Herfelt, M.A., Poulsen, P.N., Hoang, L.C.: Strength-based topology optimisation of plastic isotropic von mises materials. Struct. Multidiscip. Optim. 59(3), 893–906 (2019)
Herraz, M.: Explicit topology optimization approaches (2018)
Hesse, S.H., Leidinger, L.F., Kremheller, J., Lukaszewicz, D., Duddeck, F.: Shape optimization with the level-set-method using local volume constraints. Struct. Multidiscip. Optim. 57(1), 115–130 (2018)
Hoang, V.N., Jang, G.W.: Topology optimization using moving morphable bars for versatile thickness control. Comput. Methods Appl. Mech. Eng. 317, 153–173 (2017)
Hoang, V.N., Nguyen, N.L., Nguyen-Xuan, H.: Topology optimization of coated structure using moving morphable sandwich bars. Struct. Multidiscip. Optim. 61(2), 491–506 (2020)
Holmberg, E., Torstenfelt, B., Klarbring, A.: Stress constrained topology optimization. Struct. Multidiscip. Optim. 48(1), 33–47 (2013)
Lazarov, B.S., Wang, F., Sigmund, O.: Length scale and manufacturability in density-based topology optimization. Arch. Appl. Mech. 86(1–2), 189–218 (2016)
Lei, X., Liu, C., Du, Z., Zhang, W., Guo, X.: Machine learning-driven real-time topology optimization under moving morphable component-based framework. J. Appl. Mech. 86(1) (2019)
Liu, C., Du, Z., Zhang, W., Zhu, Y., Guo, X.: Additive manufacturing-oriented design of graded lattice structures through explicit topology optimization. J. Appl. Mech. 84(8) (2017)
Liu, C., Zhu, Y., Sun, Z., Li, D., Du, Z., Zhang, W., Guo, X.: An efficient moving morphable component (mmc)-based approach for multi-resolution topology optimization. Struct. Multidiscip. Optim. 58(6), 2455–2479 (2018)
Liu, H., Yang, D., Hao, P., Zhu, X.: Isogeometric analysis based topology optimization design with global stress constraint. Comput. Methods Appl. Mech. Eng. 342, 625–652 (2018)
Marzbanrad, J., Rostami, P.: Weight optimization of thick plate structures using radial basis functions parameterization. In: IOP Conference Series: Materials Science and Engineering, vol. 671, p. 012011. IOP Publishing (2020)
Marzbanrad, J., Varnousfaderani, P.R.: A new hybrid differential evolution with gradient search for level set topology optimization. Zanco J. Pure Appl. Sci. 31(s3), 329–334 (2019)
Niu, B., Wadbro, E.: On equal-width length-scale control in topology optimization. Struct. Multidiscip. Optim. 59(4), 1321–1334 (2019)
Raponi, E., Bujny, M., Olhofer, M., Aulig, N., Boria, S., Duddeck, F.: Kriging-Guided Level Set Method for Crash Topology Optimization. GACM, Stuttgart (2017)
Raponi, E., Bujny, M., Olhofer, M., Aulig, N., Boria, S., Duddeck, F.: Kriging-assisted topology optimization of crash structures. Comput. Methods Appl. Mech. Eng. 348, 730–752 (2019)
Raponi, E., Bujny, M., Olhofer, M., Boria, S., Duddeck, F.: Hybrid kriging-assisted level set method for structural topology optimization. In: IJCCI, pp. 70–81 (2019)
Rostami, P., Marzbanrad, J.: Cooperative coevolutionary topology optimization using moving morphable components. Eng. Optim. pp. 1–22 (2020)
Rostami, P., Marzbanrad, J.: Hybrid algorithms for handling the numerical noise in topology optimization. Acta. Mech. Sin. 36(2), 536–554 (2020)
Rostami, P., Marzbanrad, J.: Multi-material topology optimization of compliant mechanisms using regularized projected gradient approach. J. Braz. Soc. Mech. Sci. Eng. 42(9), 1–10 (2020)
Sun, Z., Cui, R., Cui, T., Liu, C., Shi, S., Guo, X.: An optimization approach for stiffener layout of composite stiffened panels based on moving morphable components (mmcs). Acta Mech Solida Sinica 1–13 (2020)
Svanberg, K.: The method of moving asymptotes-a new method for structural optimization. Int. J. Numer. Meth. Eng. 24(2), 359–373 (1987)
Takalloozadeh, M., Yoon, G.H.: Implementation of topological derivative in the moving morphable components approach. Finite Elem. Anal. Des. 134, 16–26 (2017)
Verbart, A., Langelaar, M., Van Keulen, F.: A unified aggregation and relaxation approach for stress-constrained topology optimization. Struct. Multidiscip. Optim. 55(2), 663–679 (2017)
Wang, R., Zhang, X., Zhu, B.: Imposing minimum length scale in moving morphable component (mmc)-based topology optimization using an effective connection status (ecs) control method. Comput. Methods Appl. Mech. Eng. 351, 667–693 (2019)
Wang, X., Hu, P., Kang, Z.: Layout optimization of continuum structures embedded with movable components and holes simultaneously. Struct. Multidiscip. Optim. 61(2), 555–573 (2020)
Xian, Y., Rosen, D.W.: Morphable components topology optimization for additive manufacturing. Struct. Multidiscip. Optim. 1–21 (2020)
Xie, X., Wang, S., Xu, M., Jiang, N., Wang, Y.: A hierarchical spline based isogeometric topology optimization using moving morphable components. Comput. Methods Appl. Mech. Eng. 360, 112696 (2020)
Xue, R., Li, R., Du, Z., Zhang, W., Zhu, Y., Sun, Z., Guo, X.: Kirigami pattern design of mechanically driven formation of complex 3d structures through topology optimization. Extreme Mechanics Letters 15, 139–144 (2017)
Xue, R., Liu, C., Zhang, W., Zhu, Y., Tang, S., Du, Z., Guo, X.: Explicit structural topology optimization under finite deformation via moving morphable void (mmv) approach. Comput. Methods Appl. Mech. Eng. 344, 798–818 (2019)
Yu, M., Ruan, S., Wang, X., Li, Z., Shen, C.: Topology optimization of thermal-fluid problem using the mmc-based approach. Struct. Multidiscip. Optim. 60(1), 151–165 (2019)
Zhang, W., Chen, J., Zhu, X., Zhou, J., Xue, D., Lei, X., Guo, X.: Explicit three dimensional topology optimization via moving morphable void (mmv) approach. Comput. Methods Appl. Mech. Eng. 322, 590–614 (2017)
Zhang, W., Li, D., Kang, P., Guo, X., Youn, S.K.: Explicit topology optimization using IGA-based moving morphable void (mmv) approach. Comput. Methods Appl. Mech. Eng. 360, 112685 (2020)
Zhang, W., Liu, Y., Du, Z., Zhu, Y., Guo, X.: A moving morphable component based topology optimization approach for rib-stiffened structures considering buckling constraints. J. Mech. Des. 140(11) (2018)
Zhang, W., Song, J., Zhou, J., Du, Z., Zhu, Y., Sun, Z., Guo, X.: Topology optimization with multiple materials via moving morphable component (mmc) method. Int. J. Numer. Meth. Eng. 113(11), 1653–1675 (2018)
Zhang, W., Yuan, J., Zhang, J., Guo, X.: A new topology optimization approach based on moving morphable components (mmc) and the ersatz material model. Struct. Multidiscip. Optim. 53(6), 1243–1260 (2016)
Zhang, W., Zhang, J., Guo, X.: Lagrangian description based topology optimization—a revival of shape optimization. J. Appl. Mech. 83(4) (2016)
Zhang, W., Zhou, J., Zhu, Y., Guo, X.: Structural complexity control in topology optimization via moving morphable component (mmc) approach. Struct. Multidiscip. Optim. 56(3), 535–552 (2017)
Acknowledgements
We would like to thank Professor Krister Svanberg for supporting the GCMMA/MMA subroutine.
Funding
This research is not supported by any institution and funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Rostami, P., Marzbanrad, J. Stress-limited topology optimization with local volume constraint using moving morphable components. Arch Appl Mech 91, 2345–2367 (2021). https://doi.org/10.1007/s00419-021-01886-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-021-01886-5