Abstract
Lignocellulosic materials (some natural fibers) have relevant mechanical properties when incorporated in polymeric matrices, being a renewable source to replace synthetic fibers; however, for good adhesion and durability, it is necessary to modify the fibrous surface structure in order to eliminate unwanted compounds. This work aims to evaluate different conditions of alkaline treatment of tobacco stalk waste using 10 and 15 wt% sodium hydroxide (NaOH) during an exposure time of 3 or 5 h. Thermal, chemical, and morphological characterizations as well as kinetic analysis were performed. Through Fourier transform infrared spectroscopy, it was possible to identify the partial removal of compounds such as lignin, hemicellulose, and extractives, increasing the thermal stability, which was proven by thermogravimetric analysis. Furthermore, X-ray diffraction shows a higher crystallinity index from cellulose after the alkaline treatment. Through the kinetic analysis, it is possible to observe that both methods presented similar activation energy values (Ea). In addition, after the alkaline treatment there was a reduction in Ea, the most evident result being observed in the TSW\10\5 sample, which presented an average value of Ea of 223.95 ± 15.79 kJ/mol by the Flynn–Wall–Ozawa method and 218.74 ± 24.69 kJ/mol by the Friedman method. Scanning electron microscopy showed the exposure of the microfibrils and an enhancement of roughness after alkaline treatment. Tobacco stalk wastes has potential application as reinforcing filler in composite materials since surface alkaline modification provides higher fiber/matrix adhesion through the removal of amorphous compounds.
Graphic abstract
Similar content being viewed by others
References
Afubra (Associação de Fumicultores do Brasil). Fumicultura no Brasil – 359 Evolução da fumicultura. https://afubra.com.br/fumicultura-360brasil.html. Accessed 05 April 2019.
Ajouguim S, Abdelouahdi K, Waqif M et al (2019) Modifications of Alfa fibers by alkali and hydrothermal treatment. Cellulose 26:1503–1516. https://doi.org/10.1007/s10570-018-2181-9
Albinante SR, Pacheco ÉAVB, Visconte LLY (2013) Revisão dos tratamentos químicos da fibra natural para mistura com poliolefinas. Quim Nov 36:114–122
Alves L, Medronho B, Antunes FE et al (2015) Unusual extraction and characterization of nanocrystalline cellulose from cellulose derivatives. J Mol Liq 210:106–112. https://doi.org/10.1016/j.molliq.2014.12.010
Arenas CN, Navarro MV, Martínez JD (2019) Pyrolysis kinetics of biomass wastes using isoconversional methods and the distributed activation energy model. Bioresour Technol 288:121485. https://doi.org/10.1016/j.biortech.2019.121485
Arrieta MP, Peponi L, López D, Fernández-García M (2018) Recovery of yerba mate (Ilex paraguariensis) residue for the development of PLA-based bionanocomposite films. Ind Crops Prod 111:317–328. https://doi.org/10.1016/j.indcrop.2017.10.042
Ashori A, Ornelas M, Sheshmani S, Cordeiro N (2012) Influence of mild alkaline treatment on the cellulosic surfaces active sites. Carbohydr Polym 88:1293–1298. https://doi.org/10.1016/j.carbpol.2012.02.008
Asim M, Abdan K, Jawaid M et al (2015) A review on pineapple leaves fibre and its composites. Int J Polym Sci. https://doi.org/10.1155/2015/950567
Beltrami LVR, Scienza LC, Zattera AJ (2014) Efeito do tratamento alcalino de fibras de curauá sobre as propriedades de compósitos de matriz biodegradável. Polimeros 24:388–394. https://doi.org/10.4322/polimeros.2014.024
Benini KCCC, Ornaghi HL, Pereira PHF et al (2020) Survey on chemical, physical, and thermal prediction behaviors for sequential chemical treatments used to obtain cellulose from Imperata Brasiliensis. J Therm Anal Calorim. https://doi.org/10.1007/s10973-019-09221-5
Bian H, Gao Y, Luo J et al (2019) Lignocellulosic nanofibrils produced using wheat straw and their pulping solid residue: From agricultural waste to cellulose nanomaterials. Waste Manag 91:1–8. https://doi.org/10.1016/j.wasman.2019.04.052
Bianchi O, Castel CD, De Oliveira RVB et al (2010) Avaliação da degradação não- isotérmica de madeira através de termogravimetria-TGA. Polimeros 20:395–400. https://doi.org/10.1590/S0104-14282010005000060
Borsoi C, Dahlem Júnior MA, Beltrami LVR et al (2019a) Effects of alkaline treatment and kinetic analysis of agroindustrial residues from grape stalks and yerba mate fibers. J Therm Anal Calorim. https://doi.org/10.1007/s10973-019-08666-y
Borsoi C, Menin C, Lavoratti A et al (2019b) Grape stalk fibers as reinforcing filler for polymer composites with a polystyrene matrix. J Appl Polym Sci 136:1–10. https://doi.org/10.1002/app.47427
Cai M, Takagi H, Nakagaito AN et al (2016) Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Compos Part A Appl Sci Manuf 90:589–597. https://doi.org/10.1016/j.compositesa.2016.08.025
Cardoso CR, Oliveira TJP, Santana Junior JA, Ataíde CH (2013) Physical characterization of sweet sorghum bagasse, tobacco residue, soy hull and fiber sorghum bagasse particles: Density, particle size and shape distributions. Powder Technol 245:105–114. https://doi.org/10.1016/j.powtec.2013.04.029
Carrillo-Varela I, Pereira M, Mendonça RT (2018) Determination of polymorphic changes in cellulose from Eucalyptus spp. fibres after alkalization. Cellulose 25:6831–6845. https://doi.org/10.1007/s10570-018-2060-4
Castro JDS, das Virgens CF, (2019) Thermal decomposition of Nephelium lappaceum L. peel: Influence of chemical pretreatment and evaluation of pseudo-components by Fraser–Suzuki function. J Therm Anal Calorim. https://doi.org/10.1007/s10973-019-08289-3
Catto AL, Dahlem Júnior MA, Hansen B et al (2019) Characterization of polypropylene composites using yerba mate fibers as reinforcing filler. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2019.106935
Chen B, Cai Y, Liu T et al (2019a) Improvements in physicochemical and emulsifying properties of insoluble soybean fiber by physical–chemical treatments. Food Hydrocoll 93:167–175. https://doi.org/10.1016/j.foodhyd.2019.01.058
Chen R, Lun L, Cong K et al (2019b) Insights into pyrolysis and co-pyrolysis of tobacco stalk and scrap tire: Thermochemical behaviors, kinetics, and evolved gas analysis. Energy 183:25–34. https://doi.org/10.1016/j.energy.2019.06.127
Chong CT, Mong GR, Ng JH et al (2019) Pyrolysis characteristics and kinetic studies of horse manure using thermogravimetric analysis. Energy Convers Manag 180:1260–1267. https://doi.org/10.1016/j.enconman.2018.11.071
Cong K, Han F, Zhang Y, Li Q (2019) The investigation of co-combustion characteristics of tobacco stalk and low rank coal using a macro-TGA. Fuel 237:126–132. https://doi.org/10.1016/j.fuel.2018.09.149
Coral Medina JD, Woiciechowski A, Zandona Filho A et al (2015) Lignin preparation from oil palm empty fruit bunches by sequential acid/alkaline treatment—a biorefinery approach. Bioresour Technol 194:172–178. https://doi.org/10.1016/j.biortech.2015.07.018
Cordeiroa N, Ornelasa M, Ashorib A et al (2012) Investigation on the surface properties of chemically modified natural fibers using inverse gas chromatography. Carbohydr Polym 87:2367–2375. https://doi.org/10.1016/j.carbpol.2011.11.001
Cruz G, Santiago PA, Braz CEM et al (2018) Investigation into the physical–chemical properties of chemically pretreated sugarcane bagasse. J Therm Anal Calorim 132:1039–1053. https://doi.org/10.1007/s10973-018-7041-1
da Silva Moura A, Demori R, Leão RM et al (2019) The influence of the coconut fiber treated as reinforcement in PHB (polyhydroxybutyrate) composites. Mater Today Commun 18:191–198. https://doi.org/10.1016/j.mtcomm.2018.12.006
Dahlem MA, Borsoi C, Hansen B, Catto AL (2019) Evaluation of different methods for extraction of nanocellulose from yerba mate residues. Carbohydr Polym 218:78–86. https://doi.org/10.1016/j.carbpol.2019.04.064
de Souza AG, Rocha DB, Kano FS, dos Rosa D, S, (2019) Valorization of industrial paper waste by isolating cellulose nanostructures with different pretreatment methods. Resour Conserv Recycl 143:133–142. https://doi.org/10.1016/j.resconrec.2018.12.031
Devnani GL, Sinha S (2019) Extraction, characterization and thermal degradation kinetics with activation energy of untreated and alkali treated Saccharum spontaneum (Kans grass) fiber. Compos Part B Eng 166:436–445. https://doi.org/10.1016/j.compositesb.2019.02.042
Elseify LA, Midani M, Shihata LA, El-Mously H (2019) Review on cellulosic fibers extracted from date palms (Phoenix dactylifera L.) and their applications. Cellulose 26:2209–2232. https://doi.org/10.1007/s10570-019-02259-6
Espinosa E, Arrebola RI, Bascón-Villegas I et al (2020) Industrial application of orange tree nanocellulose as papermaking reinforcement agent. Cellulose 27:10781–10797. https://doi.org/10.1007/s10570-020-03353-w
Fadele O, Oguocha INA, Odeshi AG et al (2019) Effect of chemical treatments on properties of raffia palm (Raphia farinifera) fibers. Cellulose 26:9463–9482. https://doi.org/10.1007/s10570-019-02764-8
Fogorasi MS, Barbu I (2017) The potential of natural fibres for automotive sector—review. IOP Conf Ser Mater Sci Eng. https://doi.org/10.1088/1757-899X/252/1/012044
Fonseca AS, Panthapulakkal S, Konar SK et al (2019) Improving cellulose nanofibrillation of non-wood fiber using alkaline and bleaching pre-treatments. Ind Crops Prod 131:203–212. https://doi.org/10.1016/j.indcrop.2019.01.046
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896. https://doi.org/10.1007/s10570-013-0030-4
Friedman HL (1964) Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic. J Polym Sci Part C Polym Symp 6:183–195. https://doi.org/10.1002/polc.5070060121
Gao W, Chen K (2017) Physical properties and thermal behavior of reconstituted tobacco sheet with precipitated calcium carbonate added in the coating process. Cellulose 24:2581–2590. https://doi.org/10.1007/s10570-017-1270-5
Gao W, Chen K, Xiang Z et al (2013) Kinetic study on pyrolysis of tobacco residues from the cigarette industry. Ind Crops Prod 44:152–157. https://doi.org/10.1016/j.indcrop.2012.10.032
Ghalibaf M, Doddapaneni TRKC, Alén R (2019) Pyrolytic behavior of lignocellulosic-based polysaccharides. J Therm Anal Calorim 137:121–131. https://doi.org/10.1007/s10973-018-7919-y
González A, Penedo M, Mauris E et al (2010) Pyrolysis analysis of different Cuban natural fibres by TGA and GC/FTIR. Biomass Bioenergy 34:1573–1577. https://doi.org/10.1016/j.biombioe.2010.06.004
Gu S, Zhou J, Luo Z et al (2015) Kinetic study on the preparation of silica from rice husk under various pretreatments. J Therm Anal Calorim 119:2159–2169. https://doi.org/10.1007/s10973-014-4219-z
Halder P, Kundu S, Patel S et al (2019) TGA-FTIR study on the slow pyrolysis of lignin and cellulose-rich fractions derived from imidazolium-based ionic liquid pre-treatment of sugarcane straw. Energy Convers Manag 200:112067. https://doi.org/10.1016/j.enconman.2019.112067
Hansen B, Borsoi C, Dahlem Júnior MA, Catto AL (2019) Thermal and thermo-mechanical properties of polypropylene composites using yerba mate residues as reinforcing filler. Ind Crops Prod 140:111696. https://doi.org/10.1016/j.indcrop.2019.111696
Herlina Sari N, Wardana ING, Irawan YS, Siswanto E (2018) Characterization of the chemical, physical, and mechanical properties of NaOH-treated natural cellulosic fibers from corn husks. J Nat Fibers 15:545–558. https://doi.org/10.1080/15440478.2017.1349707
Jain D, Kamboj I, Bera TK et al (2019) Experimental and numerical investigations on the effect of alkaline hornification on the hydrothermal ageing of Agave natural fiber composites. Int J Heat Mass Transf 130:431–439. https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.106
Jaroenkhasemmeesuk C, Tippayawong N (2016) Thermal degradation kinetics of sawdust under intermediate heating rates. Appl Therm Eng 103:170–176. https://doi.org/10.1016/j.applthermaleng.2015.08.114
Jhu YS, Hung KC, Xu JW, Wu JH (2019) Effects of acetylation on the thermal decomposition kinetics of makino bamboo fibers. Wood Sci Technol 53:873–887. https://doi.org/10.1007/s00226-019-01105-z
Kassab Z, Kassem I, Hannache H et al (2020) Tomato plant residue as new renewable source for cellulose production: extraction of cellulose nanocrystals with different surface functionalities. Cellulose 27:4287–4303. https://doi.org/10.1007/s10570-020-03097-7
Kaur R, Gera P, Jha MK, Bhaskar T (2018) Pyrolysis kinetics and thermodynamic parameters of castor (Ricinus communis) residue using thermogravimetric analysis. Bioresour Technol 250:422–428. https://doi.org/10.1016/j.biortech.2017.11.077
Krishnaiah P, Ratnam CT, Manickam S (2017) Enhancements in crystallinity, thermal stability, tensile modulus and strength of sisal fibres and their PP composites induced by the synergistic effects of alkali and high intensity ultrasound (HIU) treatments. Ultrason Sonochem 34:729–742. https://doi.org/10.1016/j.ultsonch.2016.07.008
Kuang Y, Li X, Luan P et al (2020) Cellulose II nanocrystal: a promising bio-template for porous or hollow nano SiO2 fabrication. Cellulose 27:3167–3179. https://doi.org/10.1007/s10570-020-02973-6
Liang M, Zhang K, Lei P et al (2019) Fuel properties and combustion kinetics of hydrochar derived from co-hydrothermal carbonization of tobacco residues and graphene oxide. Biomass Convers Biorefinery. https://doi.org/10.1007/s13399-019-00408-2
Lim WL, Gunny AAN, Kasim FH et al (2019) Alkaline deep eutectic solvent: a novel green solvent for lignocellulose pulping. Cellulose 26:4085–4098. https://doi.org/10.1007/s10570-019-02346-8
Lin X, Kong L, Cai H et al (2019) Effects of alkali and alkaline earth metals on the co-pyrolysis of cellulose and high density polyethylene using TGA and Py-GC/MS. Fuel Process Technol 191:71–78. https://doi.org/10.1016/j.fuproc.2019.03.015
Liu Y, Xie J, Wu N et al (2019) Characterization of natural cellulose fiber from corn stalk waste subjected to different surface treatments. Cellulose 26:4707–4719. https://doi.org/10.1007/s10570-019-02429-6
Lu J, Lu H (2019) Enhanced Cd transport in the soil–plant–atmosphere continuum (SPAC) system by tobacco (Nicotiana tabacum L.). Chemosphere. https://doi.org/10.1016/j.chemosphere.2019.03.021
Luo J, Li Q, Meng A et al (2018) Combustion characteristics of typical model components in solid waste on a macro-TGA. J Therm Anal Calorim 132:553–562. https://doi.org/10.1007/s10973-017-6909-9
Madsen B, Aslan M, Lilholt H (2016) Fractographic observations of the microstructural characteristics of flax fibre composites. Compos Sci Technol 123:151–162. https://doi.org/10.1016/j.compscitech.2015.12.003
Mallick D, Baruah D, Mahanta P, Moholkar VS (2018) A comprehensive kinetic analysis of bamboo waste using thermogravimetric analysis. In: 2nd international conference on power, energy and environment: towards smart technology (ICEPE), pp 1–6. https://doi.org/10.1109/EPETSG.2018.8658672
Mattoso LHC, Iozzi MA, Martins GS et al (2010) Estudo da influência de tratamentos químicos da fibra de sisal nas propriedades de compósitos com borracha nitrílica. Polimeros 20:25–32. https://doi.org/10.1590/S0104-14282010005000003
Mehmood MA, Ye G, Luo H et al (2017) Pyrolysis and kinetic analyses of Camel grass (Cymbopogon schoenanthus) for bioenergy. Bioresour Technol 228:18–24. https://doi.org/10.1016/j.biortech.2016.12.096
Mishra RK, Mohanty K (2018) Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis. Bioresour Technol 251:63–74. https://doi.org/10.1016/j.biortech.2017.12.029
Moghaddam KM, Karimi E (2020) The effect of oxidative bleaching treatment on Yucca fiber for potential composite application. Cellulose. https://doi.org/10.1007/s10570-020-03433-x
Mohammed L, Ansari MNM, Pua G et al (2015) A review on natural fiber reinforced polymer composite and its applications. Int J Polym Sci. https://doi.org/10.1155/2015/243947
Mondragon G, Fernandes S, Retegi A et al (2014) A common strategy to extracting cellulose nanoentities from different plants. Ind Crops Prod 55:140–148. https://doi.org/10.1016/j.indcrop.2014.02.014
Moonart U, Utara S (2019) Effect of surface treatments and filler loading on the properties of hemp fiber/natural rubber composites. Cellulose 26:7271–7295. https://doi.org/10.1007/s10570-019-02611-w
Naqvi SR, Tariq R, Hameed Z et al (2018) Pyrolysis of high-ash sewage sludge: Thermo-kinetic study using TGA and artificial neural networks. Fuel 233:529–538. https://doi.org/10.1016/j.fuel.2018.06.089
Neto JSS, Lima RAA, Cavalcanti DKK et al (2019) Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites. J Appl Polym Sci 136:1–13. https://doi.org/10.1002/app.47154
Nomura S, Kugo Y, Erata T (2020) 13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments. Cellulose 27:3553–3563. https://doi.org/10.1007/s10570-020-03036-6
Norul Izani MA, Paridah MT, Anwar UMK et al (2013) Effects of fiber treatment on morphology, tensile and thermogravimetric analysis of oil palm empty fruit bunches fibers. Compos Part B Eng 45:1251–1257. https://doi.org/10.1016/j.compositesb.2012.07.027
Ornaghi HL, Ornaghi FG, de Carvalho Benini KCC, Bianchi O (2019) A comprehensive kinetic simulation of different types of plant fibers: autocatalytic degradation mechanism. Cellulose 0123456789:7145–7157. https://doi.org/10.1007/s10570-019-02610-x
Ornaghi HL, Poletto M, Zattera AJ, Amico SC (2014) Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers. Cellulose 21:177–188. https://doi.org/10.1007/s10570-013-0094-1
Pereira PHF, Ornaghi Júnior HL, Coutinho LV et al (2020) Obtaining cellulose nanocrystals from pineapple crown fibers by free-chlorite hydrolysis with sulfuric acid: physical, chemical and structural characterization. Cellulose 27:5745–5756. https://doi.org/10.1007/s10570-020-03179-6
Pickering KL, Efendy MGA, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos Part A Appl Sci Manuf 83:98–112. https://doi.org/10.1016/j.compositesa.2015.08.038
Polat S, Apaydin-Varol E, Pütün AE (2016) Thermal decomposition behavior of tobacco stem. Part I: TGA–FTIR–MS analysis. Energy Sour. Part A Recover Util Environ Effic 38:3065–3072. https://doi.org/10.1080/15567036.2015.1129373
Rahib Y, Sarh B, Bostyn S et al (2019) Non-isothermal kinetic analysis of the combustion of argan shell biomass. Mater Today Proc. https://doi.org/10.1016/j.matpr.2019.07.437
Rambabu N, Panthapulakkal S, Sain M, Dalai AK (2016) Production of nanocellulose fibers from pinecone biomass: Evaluation and optimization of chemical and mechanical treatment conditions on mechanical properties of nanocellulose films. Ind Crops Prod 83:746–754. https://doi.org/10.1016/j.indcrop.2015.11.083
Rashid B, Leman Z, Jawaid M et al (2016) Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment. Cellulose 23:2905–2916. https://doi.org/10.1007/s10570-016-1005-z
Ribeiro FWM, Kotzebue LRV, Oliveira JR et al (2017) Thermal and mechanical analyses of biocomposites from cardanol-based polybenzoxazine and bamboo fibers. J Therm Anal Calorim 129:281–289. https://doi.org/10.1007/s10973-017-6191-x
Ridzuan MJM, Majid MSA, Afendi M et al (2015) The effects of the alkaline treatment’s soaking exposure on the tensile strength of napier fibre. Procedia Manuf 2:353–358. https://doi.org/10.1016/j.promfg.2015.07.062
Sampathkumar D, Punyamurthy R, Bennehalli B, Venkateshappa SC (2015) Physical characterization of natural lignocellulosic single areca fiber. Cienc e Tecnol dos Mater 27:121–135. https://doi.org/10.1016/j.ctmat.2015.10.001
Sanjay MR, Madhu P, Jawaid M et al (2018) Characterization and properties of natural fiber polymer composites: a comprehensive review. J Clean Prod 172:566–581. https://doi.org/10.1016/j.jclepro.2017.10.101
Sanjay MR, Siengchin S, Parameswaranpillai J et al (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation, processing and characterization. Carbohydr Polym 207:108–121. https://doi.org/10.1016/j.carbpol.2018.11.083
Santos CM, de Oliveira LS, Alves Rocha EP, Franca AS (2020) Thermal conversion of defective coffee beans for energy purposes: characterization and kinetic modeling. Renew Energy 147:1275–1291. https://doi.org/10.1016/j.renene.2019.09.052
Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003
Senthamaraikannan P, Kathiresan M (2018) Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis L. Carbohydr Polym 186:332–343. https://doi.org/10.1016/j.carbpol.2018.01.072
Sepe R, Bollino F, Boccarusso L, Caputo F (2018) Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Compos Part B Eng 133:210–217. https://doi.org/10.1016/j.compositesb.2017.09.030
Shakhes J, Marandi MAB, Zeinaly F et al (2011) Tobacco residuals as promising lignocellulosic materials for pulp and paper industry. BioResources 6:4481–4493. https://doi.org/10.15376/biores.6.4.4481-4493
Sobek S, Werle S (2020) Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performance. Fuel 261:116459. https://doi.org/10.1016/j.fuel.2019.116459
Soto-Salcido LA, Anugwom I, Ballinas-Casarrubias L et al (2020) NADES-based fractionation of biomass to produce raw material for the preparation of cellulose acetates. Cellulose 27:6831–6848. https://doi.org/10.1007/s10570-020-03251-1
SriBala G, Chennuru R, Mahapatra S, Vinu R (2016) Effect of alkaline ultrasonic pretreatment on crystalline morphology and enzymatic hydrolysis of cellulose. Cellulose 23:1725–1740. https://doi.org/10.1007/s10570-016-0893-2
Su Y, Xian H, Shi S et al (2016) Biodegradation of lignin and nicotine with white rot fungi for the delignification and detoxification of tobacco stalk. BMC Biotechnol 16:1–9. https://doi.org/10.1186/s12896-016-0311-8
Sullins T, Pillay S, Komus A, Ning H (2017) Hemp fiber reinforced polypropylene composites: The effects of material treatments. Compos Part B Eng 114:15–22. https://doi.org/10.1016/j.compositesb.2017.02.001
Sun D, Wang B, Wang H-M et al (2019a) Structural elucidation of tobacco stalk lignin isolated by different integrated processes. Ind Crops Prod 140:111631. https://doi.org/10.1016/j.indcrop.2019.111631
Sun Y, He Z, Tu R et al (2019b) The mechanism of wet/dry torrefaction pretreatment on the pyrolysis performance of tobacco stalk. Bioresour Technol 286:121390. https://doi.org/10.1016/j.biortech.2019.121390
Tarchoun AF, Trache D, Klapötke TM et al (2019) Ecofriendly isolation and characterization of microcrystalline cellulose from giant reed using various acidic media. Cellulose 26:7635–7651. https://doi.org/10.1007/s10570-019-02672-x
Tallam A, Bairy SR, Kalakuntala R, et al. (2020) Kinetic modeling of Citrullus lanatus (watermelon) peel using thermo gravimetric analysis: 1–8. https://doi.org/https://doi.org/10.1515/cppm-2019-0076
Tian X, Dai L, Wang Y et al (2019) Influence of torrefaction pretreatment on corncobs: a study on fundamental characteristics, thermal behavior, and kinetic. Bioresour Technol. https://doi.org/10.1016/j.biortech.2019.122490
Tuzzin G, Godinho M, Dettmer A, Zattera AJ (2015) Análise estatística da polpação de talos de tabaco por explosão a vapor. O Pap 76:61–70
Tuzzin G, Godinho M, Dettmer A, Zattera AJ (2016) Nanofibrillated cellulose from tobacco industry wastes. Carbohydr Polym 148:69–77. https://doi.org/10.1016/j.carbpol.2016.04.045
Väisänen T, Haapala A, Lappalainen R, Tomppo L (2016) Utilization of agricultural and forest industry waste and residues in natural fiber-polymer composites: A review. Waste Manag 54:62–73. https://doi.org/10.1016/j.wasman.2016.04.037
Venkateshwaran N, Elaya Perumal A, Arunsundaranayagam D (2013) Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite. Mater Des 47:151–159. https://doi.org/10.1016/j.matdes.2012.12.001
Wahlström N, Edlund U, Pavia H et al (2020) Cellulose from the green macroalgae Ulva lactuca: isolation, characterization, optotracing, and production of cellulose nanofibrils. Cellulose 27:3707–3725. https://doi.org/10.1007/s10570-020-03029-5
Wang C, Li L, Chen R et al (2019) Thermal conversion of tobacco stem into gaseous products. J Therm Anal Calorim 137:811–823. https://doi.org/10.1007/s10973-019-08010-4
Wang Q, Du H, Zhang F et al (2018a) Flexible cellulose nanopaper with high wet tensile strength, high toughness and tunable ultraviolet blocking ability fabricated from tobacco stalk: Via a sustainable method. J Mater Chem A 6:13021–13030. https://doi.org/10.1039/c8ta01986j
Wang H, Chen C, Fang L et al (2018b) Effect of delignification technique on the ease of fibrillation of cellulose II nanofibers from wood. Cellulose 25:7003–7015. https://doi.org/10.1007/s10570-018-2054-2
Wu W, Mei Y, Zhang L et al (2015) Kinetics and reaction chemistry of pyrolysis and combustion of tobacco waste. Fuel 156:71–80. https://doi.org/10.1016/j.fuel.2015.04.016
Yang Y, Li T, Jin S et al (2011) Catalytic pyrolysis of tobacco rob: Kinetic study and fuel gas produced. Bioresour Technol 102:11027–11033. https://doi.org/10.1016/j.biortech.2011.09.053
Yao F, Wu Q, Lei Y et al (2008) Thermal decomposition kinetics of natural fibers: activation energy with dynamic thermogravimetric analysis. Polym Degrad Stab 93:90–98. https://doi.org/10.1016/j.polymdegradstab.2007.10.012
Yıldız Z, Ceylan S (2018) Pyrolysis of tobacco factory waste biomass: TG-FTIR analysis, kinetic study and bio-oil characterization. J Therm Anal Calorim 136:783–794. https://doi.org/10.1007/s10973-018-7630-z
Yu D, Hu S, Liu W et al (2020) Pyrolysis of oleaginous yeast biomass from wastewater treatment: kinetics analysis and biocrude characterization. Renew Energy. https://doi.org/10.1016/j.renene.2020.01.028
Yue Y, Han J, Han G et al (2015) Cellulose fibers isolated from energycane bagasse using alkaline and sodium chlorite treatments: structural, chemical and thermal properties. Ind Crops Prod 76:355–363. https://doi.org/10.1016/j.indcrop.2015.07.006
Zhang X, Deng H, Yang J et al (2020) Isoconversional kinetics of pyrolysis of vaporthermally carbonized bamboo. Renew Energy 149:701–707. https://doi.org/10.1016/j.renene.2019.12.037
Zhang Y, He Q, Cao Y et al (2019) Interactions of tobacco shred and other tobacco-based materials during co-pyrolysis and co-combustion. J Therm Anal Calorim 136:1711–1721. https://doi.org/10.1007/s10973-018-7836-0
Zhao D, Yang F, Dai Y et al (2017) Exploring crystalline structural variations of cellulose during pulp beating of tobacco stems. Carbohydr Polym 174:146–153. https://doi.org/10.1016/j.carbpol.2017.06.060
Zhao G, Du J, Chen W et al (2019) Preparation and thermostability of cellulose nanocrystals and nanofibrils from two sources of biomass: rice straw and poplar wood. Cellulose 26:8625–8643. https://doi.org/10.1007/s10570-019-02683-8
Zheng C, Li D, Ek M (2019) Mechanism and kinetics of thermal degradation of insulating materials developed from cellulose fiber and fire retardants. J Therm Anal Calorim 135:3015–3027. https://doi.org/10.1007/s10973-018-7564-5
Zimmermann MVG, Borsoi C, Lavoratti A et al (2016) Drying techniques applied to cellulose nanofibers. J Reinf Plast Compos 35:682–697. https://doi.org/10.1177/0731684415626286
Zsakó J (1968) Kinetic analysis of thermogravimetric data. J Phys Chem 72:2406–2411. https://doi.org/10.1021/j100853a022
Acknowledgments
The authors would like to thank CAPES and UNIVATES for the financial support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare they have no financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Partial financial support for carrying out the work was received from Coordination for the Improvement of Higher Education Personnel (CAPES) and University of Taquari Valley (UNIVATES).
Ethical standard
This research did not involve the participation of humans or animals.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dallé, D., Hansen, B., Zattera, A.J. et al. Kinetic evaluation of tobacco stalk waste exposed to alkaline surface treatment under different conditions. Cellulose 28, 2053–2073 (2021). https://doi.org/10.1007/s10570-020-03657-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-020-03657-x