Abstract
In this paper, techniques for machining and micro-structuring dimples and grooves on the interior of cylinders using an active rotating tool are discussed. Microscopic dimples and grooves patterned on the inner surface of a cylinder act as lubrication and reduce friction. The active rotating tool presented here is equipped with a gap sensor that can measure the distance between the tool, workpiece, and machining tip so that micron-scale dimples and grooves can be patterned and connected to piezoelectric actuators. Electronic control and power connections are made to the external controller via a slip ring. Accurate measurements of the distance between the tool and workpiece were used to increase the lubrication effect by machining patterns with uniform size and depth. It is difficult to accurately measure errors in cylinders of various shapes using a single gap sensor; thus, we employed two gap sensors to ensure accurate assessment of cylinder shape, and a least mean square algorithm was implemented to compensate for the measured runout errors, which were tracked and compensated using the gap sensor. The method presented here reduces errors on the inner face of a cylinder, and produces a uniform pattern.
Similar content being viewed by others
Abbreviations
- \( i \) :
-
Number of gap sensors
- \( dt \) :
-
Sampling time
- \( \Delta {\text{t}} \) :
-
Communication time delay
- \( \varOmega \) :
-
Encoder rotation frequency
- \( w_{ik} \left( t \right) \) :
-
Sine and cosine weighting coefficients
- \( \mu_{ik} \) :
-
k th order tracking coefficient
- \( r_{c} \left( t \right) \) :
-
Compensation signal
References
Anuradha, P., & Kumar, P. (2012). Effect of Lubricant selection on EHL performance of involute spur gears. Tribology International, 50, 82–90. https://doi.org/10.1016/j.triboint.2012.02.006.
Bang, Y. B., Lee, K. M., & Oh, S. (2005). 5-axis micro milling machine for machining micro parts. The International Journal of Advanced Manufacturing Technology, 25(9–10), 88–894. https://doi.org/10.1007/s00170-003-1950-1.
Dahlmann, D., & Denkena, B. (2017). Hybrid tool for high performance structuring and honing of cylinder liners. CIRP Annals, 66(1), 113–116. https://doi.org/10.1016/j.cirp.2017.04.032.
Denkena, B., Bertram, O., Dahlmann, D., & Park, J. K. (2019). Hybrid cutting apparatus and grooving method using same. US patent, 10,391,564. https://patentimages.storage.googleapis.com/fb/83/02/1d5ae4d6bf4d01/US10391564.pdf. Accessed 27 Aug 2019.
Denkena, B., Koehler, J., Kaestner, J., Goettsching, T., Dinkelacker, F., & Ulmer, H. (2013). Efficient machining of microdimples for friction reduction. Journal of Micro and Nano-Manufacturing, 1(1), 011003. https://doi.org/10.1115/1.4023757.
Dubey, A. K., & Yadava, V. (2008). Laser beam machining—a review. International Journal of Machine Tools and Manufacture, 48(6), 609–628. https://doi.org/10.1016/j.ijmachtools.2007.10.017.
Haykin, S., & Widrow, B. (2003). Least-mean-square adaptive filters. Hoboken, NJ, USA: Wiley.
Holmberg, K., & Erdemir, A. (2017). Influence of tribology on global energy consumption, costs and emissions. Friction, 5(3), 263–284. https://doi.org/10.1007/s40544-017-0183-5.
Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., & Etsion, I. (2005). The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. Tribology International, 38(3), 219–225. https://doi.org/10.1016/j.triboint.2004.08.004.
Kuram, E., & Ozcelik, B. (2016). Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. Journal of Intelligent Manufacturing, 27, 817–830. https://doi.org/10.1007/s10845-014-0916-5.
Kurniawan, R., & Ko, T. J. (2015). Friction reduction on cylindrical surfaces by texturing with a piezoelectric actuated tool holder. International Journal of Precision Engineering and Manufacturing, 16(5), 861–868. https://doi.org/10.1007/s12541-015-0113-2.
Park, D. S., Cho, M. W., Lee, H., & Cho, W. S. (2004). Micro-grooving of glass using micro-abrasive jet machining. Journal of Materials Processing Technology, 146(2), 234–240. https://doi.org/10.1016/j.jmatprotec.2003.11.013.
Polcar, T., Parreira, N. M. G., & Novak, R. (2007). Friction and wear behaviour of CrN coating at temperatures up to 500 °C. Surface & Coatings Technology, 201(9–11), 5228–5235. https://doi.org/10.1016/j.surfcoat.2006.07.121.
Priest, M., & Taylor, C. M. (2000). Automobile engine tribology-approaching the surface. Wear, 241(2), 193–203. https://doi.org/10.1016/S0043-1648(00)00375-6.
Richardson, D. E. (2000). Review of power cylinder friction for diesel engines. Journal of Engineering for Gas Turbines and Power, 122(4), 506–519. https://doi.org/10.1115/1.1290592.
Ro, S. K., Kyung, J. H., & Park, J. K. (2005). Runout control of a magnetically suspended high speed spindle using adaptive feedforward method. International Journal of Precision Engineering and Manufacturing, 6(2), 19–25.
Xu, Q. F., & Wang, J. N. (2009). A superhydrophobic coating on aluminium foil with an anti-corrosive property. New Journal of Chemistry, 33(4), 734–738. https://doi.org/10.1039/B817130K.
Acknowledgements
This work was supported by the Industrial Strategic Technology Development Program (10060188, Development of ICT-based smart machine tools and flexible automation systems) and funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Cho, SB., Ro, SK., Kim, BS. et al. The development of a micro-pattern manufacturing method using rotating active tools with compensation of estimated errors and an LMS algorithm. J Intell Manuf 32, 51–59 (2021). https://doi.org/10.1007/s10845-020-01558-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-020-01558-1