Abstract
The microstructure and shear strength changes of SnAgCu/Cu and SnAgCu/Ni–P/Cu surface mount solder joints during thermal aging at 150 °C and thermal cycling between ?40 and 150 °C were investigated. The reaction rate between SnAgCu and Cu is higher than that between SnAgCu and Ni–P. After long aging time, the SnAgCu/Cu interface becomes the weakest region in the SnAgCu/Cu solder joint, whereas the shear-force-induced cracks in the SnAgCu/Ni–P solder joint appear at the interface of Ni–P/Cu. During thermal cycling, cracks develop in both solder joints and the shear strength decreases. After extensive thermal cycling, the Ni–P layer separates from the Cu substrate and the shear strength of the SnAgCu/Ni–P solder joint decreases drastically.
Similar content being viewed by others
References
S.K. Kang and A.K. Sarkhel, J. Electron. Mater. 23, 701 (1994).
J.S. Hwang and R.M. Vorgas, Soldering Surface Mount Technol. 5, 38 (1990).
N.M. Poon, C.M. Lawrence Wu, Joseph K.L. Lai, and Y.C. Chan, IEEE Trans. Comp. Packag. Manuf. Technol. 23, 708 (2000).
Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).
M. McCormack and S. Jin, J. Electron. Mater. 23, 715 (1994).
Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 866 (1998).
T.L. Ylijoki, H. Steen, and A. Forsten, IEEE Trans. Comp. Packag. Manuf. Technol. 20, 194 (1997).
J.C. Foley, A. Gickler, F.H. Leprevost, and D. Brown, J. Electron. Mater. 29, 1258 (2000).
R.E. Pratt, E.I. Stromseold, and D.J. Quesnel, IEEE Trans. Comp. Packag. Manuf. Technol. 19, 134 (1996).
P.L. Tu, Y.C. Chan, and J.K.L. Lai, IEEE Trans. Comp. Packag. Manuf. Technol. 20, 87 (1997).
Y.C. Chan, P.L. Tu, A.C.K. So, and J.K.L. Kai, IEEE Trans. Comp. Packag. Manuf. Technol. 20, 463 (1997).
Y.Y. Wei and J.G. Duh, J. Mater. Sci. Mater. Electron. 9, 373 (1998).
H.N. Keller, IEEE Trans. Comp. Hybrids Manuf. Technol. 9, 433 (1986).
A.H. Graham, R.W. Lindsay, and H.J. Read, J. Electrochem. Soc. 112, 401 (1965).
K.L. Lin and P.J. Lai, J. Electrochem. Soc. 136, 3803 (1989).
J. Sigelko, S. Choi, K.N. Subramanian, and J.P. Lucas, J. Elec-tron. Mater. 29, 1307 (2000).
T.M. Korhonen, P. Su, S.J. Hong, M.A. Korhonen, and C.Y. Li, J. Electron. Mater. 29, 1194 (2000).
S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Elec-tron. Mater. 29, 1249 (2000).
P.M. Hansen, Constitution of Binary Alloys (McGraw-Hill, New York, 1958), p. 52.
W. Yang and R.W. Messler, J. Electron. Mater. 23, 765 (1994).
C.Y. Lee and K.L. Lin, Thin Solid Films 249, 201 (1994).
W.J. Tomlinson and H.G. Rhodes, J. Mater. Sci. 22, 1769 (1987).
C.D. Young and J.G. Duh, IEEE Trans. Comp. Packag. Manuf. Technol. A21, 433 (1998).
S. Ahat, L.G. Du, S. Mei, and L. Luo, J. Electron. Mater. 29, (2000).
R.W. Bulluffi and L.L. Seigle, Acta Metall. 5, 449 (1957).
Y. Yuan, J.H. Fendler, and I. Cabasso, Chem. Mater. 4, 312 (1992).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ahat, S., Sheng, M. & Luo, L. Effects of static thermal aging and thermal cycling on the microstructure and shear strength of Sn95.5Ag3.8Cu0.7 solder joints. Journal of Materials Research 16, 2914–2921 (2001). https://doi.org/10.1557/JMR.2001.0400
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2001.0400