Abstract
A novel poly(methyl methacrylate) (PMMA) nanocomposite containing dispersed inorganic nanoribbons [ZnO–0.15Zn(CH3COO)2−0.85H2O] was prepared by free radical polymerization of methyl methacrylate in the acetone solution. Experimental results showed that inorganic nanoribbons were uniformly distributed in and bonded to the PMMA host matrix without macroscopic organic–inorganic phase separation. It was found that the thermal stability and glass-transition temperature of the nanocomposite films increased effectively with increasing inorganic content at low content and remained above 1 wt% inorganic content. These results suggest the network formation because of the strong interaction between the inorganic nanoribbons and the polymer matrix, which induces the mobility restriction of polymer chains. The characteristics of the one-dimensional inorganic nanoribbons we used here may play a key role in the formation of the “cross-link” networks and in the decision to lower the content of the inorganic nanoribbon additive.
Similar content being viewed by others
References
R. Chapman and P. Mulvaney: Electro-optical shifts in silver nanoparticle films. Chem. Phys. Lett. 349, 358 (2001).
O. Wilson, G.J. Wilson, and P. Mulvaney: Laser writing in polarized silver nanorod films. Adv. Mater. 14, 1000 (2002).
P.J. Yoon, T.D. Fornes, and D.R. Paul: Thermal expansion behavior of nylon 6 nanocomposites. Polymer 43, 6727 (2002).
T. Kashiwagi, F. Du, J.F. Douglas, K. Winey, R.H. Harris, Jr., and J.R. Shields: Nanoparticle networks reduce the flammability of polymer nanocomposites. Nat. Mater. 4, 928 (2005).
Y.F. Lu, Y. Yang, and A. Sellinger: Self-assembly of mesoscopically ordered chromatic polydiacetylene/silica nanocomposites. Nature 410, 913 (2001).
Y.C. Chen, N.R. Raravikar, L.S. Schadler, P.M. Ajayan, Y.P. Zao, T.M. Lu, G.C. Wang, and X.C. Zhang: Ultrafast optical switching properties of single-wall carbon nanotube polymer composites at 1.55 μm. Appl. Phys. Lett. 81, 975 (2002).
E. Kymakis and G.A.J. Amartunga: Single-wall carbon nanotube/conjugated polymer photovoltaic devices. Appl. Phys. Lett. 80, 112 (2002).
B. Philip, J.K. Abraham, A. Chandrasekhar, and V.K. Varadan: Carbon nanotube/PMMA composite thin films for gas-sensing applications. Mater. Struct. 12, 935 (2003).
K. Rege, N.R. Raravikar, D.Y. Kim, L.S. Schadler, P.M. Ajayan, and J.S. Dordick: Enzyme-polymer-single walled carbon nanotube composites as biocatalytic films. Nano Lett. 3, 829 (2003).
M. Kobayashi, Y. Rharbi, L. Brauge, L. Cao, and M.A. Winnik: Effect of silica as fillers on polymer interdiffusion in poly(butyl methacrylate) latex films. Macromolecules 35, 7387 (2002).
A. Karim, K. Yurkeli, C. Meredith, E. Amis, and R. Krishnamoorti: Combinatorial methods for polymer materials science: Phase behavior of nanocomposite blend films. Polym. Eng. Sci. 42, 1836 (2002).
M. Alexandre and P. Dubois: Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng., R 28, 1 (2000).
Z.H. Liu, X.J. Yang, Y. Makita, and K. Ooi: Synthesis of a new layered manganese oxide nanocomposite through a delamination/reassembling process. Chem. Lett. (Jpn.) 7, 680 (2002).
J. Heising and M.G. Kanatzidis: Structure of restacked MoS2 and WS2 elucidated by electron crystallography. J. Am. Chem. Soc. 121, 638 (1999).
N. Sukpirom and M.M. Lerner: Preparation of organic-inorganic nanocomposites with a layered titanate. Chem. Mater. 13, 2179 (2001).
T. Nakato, Y. Furumi, N. Terao, and T. Okuhara: Reaction of layered vanadium phosphorus oxides, VOHPO4·0.5H2O and VOHPO4·0.5H2O, with amines and formation of exfoliative intercalation compounds. J. Mater. Chem. 10, 737 (2000).
F. Leroux, M. Adachi-Pagano, and M. Intissar: S. Chauvière, C. Forano, and J.P. Bess: Delamination and restacking of layered double hydroxides. J. Mater. Chem. 11, 105 (2001).
J.W. Gilman: Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites. Appl. Clay Sci. 15, 31 (1999).
N.R. Raravikar, L.S. Schadler, A. Vijayaraghavan, Y.P. Zhao, B.Q. Wei, and P.M. Ajayan: Synthesis and characterization of thickness-aligned carbon nanotube-polymer composite films. Chem. Mater. 17, 974 (2005).
A. Laachachi, M. Cochez, M. Ferriol, E. Leroy, J.M. Lopez-Cuesta, and N. Oget: Influence of Sb2O3 particles as filler on the thermal stability and flammability properties of poly(methyl methacrylate) (PMMA). Polym. Degrad. Stab. 85, 641 (2004).
Z. Cao, W. Xie, J.M. Hwu, L. Wells, and W.P.J. Pan: The Characterization of organic modified montmorillonite and its filled PMMA nanocomposite. Thermal Anal. Calorim. 64, 467 (2001).
A. Soldera and N. Metatla: Glass transition phenomena observed in stereoregular PMMAs using molecular modeling. Compos. Part A: Appl. Sci. Manuf. 36, 521 (2005).
Z. Gui, J. Liu, Z.Z. Wang, L. Song, Y. Hu, W.C. Fan, and D.Y. Chen: From muticomponent precursor to nanoparticle nanoribbons of ZnO. J. Phys. Chem. B 109, 1113 (2005).
M. Avella, M.E. Errico, S. Martelli, and E. Martuscelli: Preparation methodologies of polymer matrix nanocomposites. Appl. Organomet. Chem. 15, 435 (2001).
M. Avella, M.E. Errico, and E. Martuscelli: Novel PMMA/CaCO3 nanocomposites abrasion resistant prepared by an in situ polymerization process. Nano Lett. 1, 213 (2001).
L. Tammaro, M. Tortora, V. Vittoria, U. Costantino, and F. Marmottini: Methods of preparation of novel composites of poly(∈-caprolactone) and a modified Mg/Al hydrotalcite. J. Polym. Sci., Part A: Polym. Chem. 43, 2281 (2005).
A.R. Manninen, H.E. Naguib, A.V. Nawaby, and M. Day: CO2 Sorption and diffusion in polymethyl methacrylate–clay nanocomposites. Polym. Eng. Sci. 45, 904 (2005).
H.T. Wang, P. Xu, W. Zhong, L. Shen, and Q.G. Du: Transparent poly(methyl methacrylate)/silica/zirconia nanocomposites with excellent thermal stabilities. Polym. Degrad. Stab. 87, 319 (2005).
A. Laachachi, M. Cochez, M. Ferriol, J.M. Lopez-Cuesta, and E. Leroy: Use of oxide nanoparticles and organoclays to improve thermal stability and fire retardancy of poly(methyl methacrylate). Mater. Lett. 59, 36 (2005).
J. Yang, C. Xue, S.H. Yu, J.H. Zeng, and Y.T. Qian: General synthesis of semiconductor chalcogenide nanorods by using the monodentate ligand n-butylamine as a shape controller. Angew. Chem., Int. Ed. Engl. 41, 4697 (2002).
X.H. Yuan, Z.L. Peng, Y. Zhang, and Y.X. Zhang: In situ preparation of zinc salts of unsaturated carboxylic acids to reinforce NBR. J. Appl. Polym. Sci. 12, 2740 (2000).
Y. Ishigaki, K. Takahashi, and H. Fukuda: Stereochemistry of the free-radical polymerization of zinc methacrylates coordinated with a bidentate ligand. Macromol. Rapid Commun. 15, 1024 (2000).
Acknowledgments
This work was supported by the National Natural Foundation of China (No. 20571070) and the special foundation of State Key Laboratory of Fire Science.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ding, Y., Gui, Z., Zhu, J. et al. Poly(methyl methacrylate)-nanoribbon nanocomposites with high thermal stability and improvement in the glass-transition temperature. Journal of Materials Research 22, 3316–3323 (2007). https://doi.org/10.1557/JMR.2007.0427
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2007.0427