Abstract
Several purification and processing techniques for laser-produced single wall carbon nanotube (SWCNT) soot were investigated and the resulting changes in the mechanical properties were characterized. SWCNT ribbons had non-nanotube carbonaceous content modified via thermal oxidation and the relationship between oxidation parameters and mechanical strength studied. SWCNT/polyamide composites were developed and exhibited improved toughness, tensile strength and elongation before break. The composite material is observed to have a greater tensile strength than either the baseline paper or the added polyamide.
Similar content being viewed by others
References
G. Liu, Y. Zhao, K. Deng and L. Sun. Nano Lett. 8, 1071–1075 (2008).
V. Popov. Mater. Sci. Eng. R. 43, 61–102 (2004).
L. Henrad, E. Hernández, P. Bernier and A. Rubio. Phys. Rev. B 60, 8521–8524 (1999).
J. Gao, B. Zhao, M. Itkis and R. Haddon. J. Am. Chem. Soc. 128, 7492–7496 (2006).
B. Shim, J. Zhu, K. Critchley and N. Kotov. Am. Chem. Soc. Nano 3, 1711–1722 (2009).
B. Landi, C. Cress, C. Evans and R. Raffaelle. Chem. Mater. 17, 6819–6834 (2005).
A. Dillon, T. Gennett, K. Jones and M Heben, Adv. Mater. 11, 1354–1358 (1999).
B. Landi and R. Raffaelle. J. Nanosci. Nanotechnol. 7, 883–890 (2007).
C. Schauerman, J. Alvarenga, C. Cress and R. Raffaelle. Carbon. 47, 2431–235 (2009).
H. Huang, J. Marie, H. Kajiura and M. Ata. Nano Lett. 2, 1117–1119 (2002).
B. Landi, H. Ruf, J. Worman and R. Raffaelle. J. Phys. Chem. B 108, 17089–17095 (2004).
W. Zhang, L. Shen, I. Phang and T. Liu. Macromolecules 37, 256–259 (2004).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Moses, B.T., Jarosz, P.R., Schauerman, C.M. et al. Dynamic Mechanical Analysis of Bulk Carbon Nanotube Materials. MRS Online Proceedings Library 1204, 1848 (2009). https://doi.org/10.1557/PROC-1204-K18-48
Received:
Accepted:
Published:
DOI: https://doi.org/10.1557/PROC-1204-K18-48