Abstract
Composition profiles of thermal and pulsed ion beam annealed PtCr/Si and CrTa/Si have been determined using Rutherford backseattering analysis. Thermal annealing resulted in layered phase separation with Pt-silicide in the PtCr/Si case, and CrSi2 in the CrTa/Si case, forming at the Si surface. Pulsed ion beam annealing, 300–380 keV protons at energy densities ~0.75–1.6 J/cm2, produced interface melting with no layered phase separation.
Similar content being viewed by others
References
R. T. Hodgson, J. E. E. Baglin, R. Pal, J. M. Neri and D. A. Hammer, Appl. Phys. Lett. 37, 187 (1980).
J. E. E. Baglin, R. T. Hodgson, W. K. Chu, J. M. Neri, D. A. Hammer and L. J. Chen, Proc. of 5th Intern. Conf. on Ion Beam Analysis, Sydney, 1981.
L. J. Chen, L. S. Hung, J. W. Mayer and J. E. E. Baglin, Metastable Materials Formation by Ion Implantation, Materials Research Society, 319, (1982).
L. J. Chen, L. S. Hung, J. W. Mayer, J. E. E. Baglin, J. M. Neri and D. A. Hammer, Appl. Phys. Lett. 40, 595 (1982).
R. Fastow, J. Gyulai and J. W. Mayer. This conference.
K. N. Tu, W. N. Hammer and J. O. Olowolafe, J. Appl. Phys. 51, 1663 (1980).
G. Ottaviani, K. N. Tu, J. W. Mayer and B. Y. Tsaur, Appl. Phys. Lett. 36, 331 (1980).
J. W. Mayer, S. S. Lau and K. N. Tu, J. Appl. Phys. 50, 5855 (1979).
M. Eizenberg and K. N. Tu, J. Appl. Phys. 53, 1577 (1982).
J. O. Olowolafe, K. N. Tu and J. Angilello, J. Appl. Phys. 50, 6316 (1979).
M. Eizenberg, G. Ottaviani and K. N. Tu, Appl. Phys. Lett. 37, 87 (1980).
M. Eizenberg, Thin Solid Films 89, 355 (1982).
R. Thompson, M. Eizenberg and K. N. Tu, J. Appl. Phys. 52, 6763 (1981).
J. M. Harris, S. S. Lau, M.-A. Nicolet and R. S. Nowicki, J. Electrochem. Soc. 123, 120 (1976).
J. M. Neri, D. A. Hammer, G. Ginet and R. N. Sudan, Appl. Phys. Lett. 37, 101 (1980).
C. J. Palmstrom, J. Gyulai and J. W. Mayer. To be published.
Acknowledgments
Thanks are due to K. N. Tu and M. Eizenberg (IBM, Yorktown Heights) for supplying PtCr/Si prepared at the IBM Central Services Facility, D. Campbell (IBM, East Fishkill) for supplying the CrTa/Si samples and D. A. Hammer (Cornell) for the use of the pulsed ion beam facility. The authors wish to acknowledge J. W. Mayer and J. Gyulai for encouragement and helpful discussions. This work was supported in part by the Defense Advanced Research Projects Agency through the U.S. Office of Naval Research (L. Cooper). The ion beam facility was supported in part by ONR (Contract N00173-79-C-0085).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Palmstrom, C.J., Fastow, R. Pulsed Ion Beam Interface Melting of PtCr and CrTa Alloys on Si Structures. MRS Online Proceedings Library 13, 715–720 (1982). https://doi.org/10.1557/PROC-13-715
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-13-715