Abstract
The effect of surface defects on the performance of TiAl-base alloys is an issue of importance in contemplating their application into engine components. Due to the relatively low ductility and low impact resistance of gamma alloys the validation of models for estimating economic life and for safe-life approaches employed for components becomes of great importance. Surface defects can be attributed to various sources during the manufacturing or handling of the components. In fact, little is known about the detrimental effects of surface defects on gamma alloys. In the present study, the effect of artificially introduced surface defects, on the high cycle fatigue behavior of the Ti-47Al-2W-0.5Si, will be investigated and correlated with the crack growth behavior at 700°C. The results are reported in the form of the Kitagawa diagram in which the safe and unsafe zones for crack advance and fracture are defined.
Similar content being viewed by others
References
Z.W. Huang, P. Bowen, S. Davey and P.A. Blenkinsop, Proc. of the 4th Int. Parsons Turbine Conference (1997) p. 489.
C. Austin and T.J. Kelly, Proc. of 1st Symp. on “Structural Intermetallics”, eds. R. Darolia et al., TMS publ. (1993) p. 1433.
Y.W. Kim, Journal of Metal, Vol. 46 (7) (1994) p. 30.
Y.W. Kim and D.M. Dimiduk, Proc. of 2n Symp. on “Structural Intermetallics”, eds. M.V. Nathal et al., TMS publ. (1997) p. 531.
M. Nazmy and M. Staubli, US Patent 5,207,982 & EP. 45505 B1
V. Lupinc, M. Marchionni, M. Nazmy, G. Onofrio, L. Rémy, M. Staubli and W.M. Yin, Proc. of “Structural Intermetallics 1997”, eds. M.V. Nathal et al., TMS publ. (1997) p. 515.
A. Tomasi, S. Gialanella, P.G. Orsini and M. Nazmy, MRS Symposium Proceedings Vol. 364 (1995) p. 999.
B.A. Cowles, Int. J. Fract, Vol. 80 (1996) p. 147.
P.S. Steif, J.W. Jones, T. Harding, M.P. Rubal, V.Z. Gandelsman, N. Biery and T.M. Pollock, Proc. of 2n Symp. on “Structural Intermetallics”, eds M.V. Nathal et al., TMS publ. (1997) p. 435.
J.C. Newman and I.S. Raju, NASA Technical Note, TP-1578 (1979).
W.F. Brown and J.E. Srowley, ASTM-STP 410 (1966) p. 1.
A.L. McKelvey, K.T. Venkateswara Rao and R.O. Ritchie, Metallurgical and Materials Transactions A, Vol. 31A (2000) p. 1413.
J. Lou, C. Mercer and W.O Soboyejo, MRS Symposium Proceeding, Vol. 646 (2001) N1.7.1
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nazmy, M., Staubli, M., Onofrio, G. et al. Effect of surface defects on the fatigue behavior of a cast TiAl alloy. MRS Online Proceedings Library 646, 419–424 (2000). https://doi.org/10.1557/PROC-646-N5.44.1
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-646-N5.44.1