Abstract
The use of transparent conducting oxides (TCO) as electrical contacts in a-Si:H solar cells has stimulated interest in the multitude of effects that these layers have on a-Si:H solar cell performance. The study of a-Si:H p-i-n junctions using a TCO contact involves many factors such as, interdiffusion, transmission, reflection, and resistivity. In this paper, we attempt to distinguish between these factors through the role they play in determining the solar cell device performance. Devices were characterized via dark and illuminated current vs. voltage (I–V) measurements, and spectral response. It was found that the properties of the TCO have an important role in influencing FF and Jsc in the devices.
Similar content being viewed by others
References
O. Kuboi, Jap. Journal Appl. Phys., Vol. 20, No. 11, L783–L786, 1981.
E. Yablanovitch and G. Cody, IEEE Transactions on Electron Devices, Vol. ED-29, No. 2, 300, Feb. (1982).
H. Deckman, C. Wronski, H. Witzke, and E. Yablanovitch, Proc. 16th IEEE PV Spec. Conference, San Diago, CA (1982), p. 1425; Appl. Phys. Lett. 42, 968 (1983).
B. Faughnan, J. Appl. Phys. 58(7), 2746, (1985).
B. Faughnan, ibid.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Walker, C., Hollingsworth, R., del Cueto, J. et al. Influence of Transparent Conducting Oxide on Amorphous Silicon Solar Cell Performance. MRS Online Proceedings Library 70, 563–568 (1986). https://doi.org/10.1557/PROC-70-563
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-70-563