Summary
Measurements of the gas pressure just required to displace saturating liquids and allow a slow continuous stream of gas to pass through ponderosa pine and redwood cross sections over a broad range of thicknesses at varying distances from pith to bark, together with the surface tensions of the liquids, have been used to calculate: (1) maximum lumen radii and maximum fiber lengths from the data for the thinner specimens, and (2) maximum pit pore radii for the specimens thicker than the maximum fiber lengths. Maximum lumen radii and maximum fiber lengths both increase from pith to bark and with increasing height in the tree. Maximum effective pit pore radii increase from the pith to the sapwood transition point, then increase abruptly followed by a variable zone in the sapwood. Displacement of water or a wetting agent solution gave comparable results for never-dried wood. Drying from water and resoaking reduced the maximum effective pit pore size. Drying from a wetting agent soaked condition followed by resoaking reduced the loss in permeability but not to the degree anticipated. ponderosa pine sapwood, that had been exposed to bacterial action, showed a large increase in the maximum effective communicating opening sizes.
Similar content being viewed by others
References
Comstock, G. L.: Longitudinal permeability of green eastern hemlock. For. Prod. J. 15 (1965) 441–449.
—: Longitudinal permeability of wood to gases and non-swelling liquids. For. Prod. J. 17 (1967) No. 10 41–46.
—: Relationship between the permeability of green and dry eastern hemlock. For. Prod. J. 18 (1968) No. 8, 20–23.
Ellwood, E. L., and B. A. Ecklund: Bacterial attack of pine logs in pond storage, For. Prod. J. 9 (1959) 283–292.
Griffin, G. L.: Bordered pits in Douglas-fir: a study of the position of the torus in mountain and lowland specimens in relation to creosote penetration. J. Forestry 17 (1919) 813–822.
Hart, C. A., and R. J. Thomas: Mechanism of bordered pit aspiration as caused by capillarity. For. Prod. J. 17 (1967) No. 11, 61–68.
Liese, W., and J. Bauch: On the closure of bordered pits in conifers. Wood Sci. Technol. 1 (1967) 1–12.
Resch, H., and D. G. Arganbright: Variation of specific gravity, extractive content, and tracheid length in redwood trees. Forest Science 14 (1968) 148–155.
Smith, D. M., and R. B. Miller: Methods of measuring and estimating tracheid wall thickness of redwood (Sequoia sempervirens). Tappi 47 (1964) No. 10, 599–604.
Stamm, A. J.: Permeability of wood to fluids. For. Prod. J. 13 (1963) 503–507.
—: Wood and Cellulose Science, 405. New York 1964: Ronald Press Co.
—: Maximum pore diameter of film materials. For. Prod. J. 16 (1966) No. 12, 59–63.
—: Flow of fluids in wood, Part I, Wood Sci. Technol. 1 (1967) 122–141.
Stamm, A. J. and D. G. Arganbright: Surface tension of the sap of several species of wood. Wood and Fiber 1 (1970) (In Print).
—, and W. J. Elliott: Effective radii of lumen and pit pores in softwoods. Wood Sci. 1 (1968) 93–101.
Thomas, R. J., and D. D. Nicholas: Pit membrane structure in loblolly pine as influenced by solvent exchange drying. For. Prod. J. 16 (1966) No. 3, 53–56.
Zuidemn, H. H., and G. W. Waters: Correlation factor for surface and interfacial tension by ring method. Ind. Eng. Chem., Anal. Ed. 13 (1941) 312.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Stamm, A.J. Variations of maximum tracheid and pit pore dimensions from pith to bark for ponderosa pine and redwood before and after drying determined by liquid displacement. Wood Science and Technology 4, 81–96 (1970). https://doi.org/10.1007/BF00365295
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00365295