Abstract
Validation of a method for the determination of trace elements in plastic using neutron activation analysis (NAA) required evaluation of nuclear effects. Since plastic is a moderator of neutrons, it is possible that the neutron flux may be affected in such a way as to effectively increase or decrease the measured activity of radionuclides within the plastic. Such effects are likely to depend on the thickness of the sample and so thicknesses of plastic ranging from 1 to 20 mm were used to quantify the effects. A standard containing vanaldium (a thermal neutron absorber) and silver (with epithermal neutron resonances) was used in a sandwich of the plastic. The sandwich was then irradiated and the standard counted. The activity of each radionuclide for each thickness was evaluated. The results showed that a variation of only 10% maximum was observed for thicknesses up to 20 mm. An increase in measured activity was observed for both the thermal and epithermal absorbers.
Similar content being viewed by others
References
P. Bode, M. De Bruin, Th. G. Aalbers, P. J. Meyer,Biol. Trace Element. Research, 26/27 (1990) 377.
P. Bode,J. Radioanal. Nucl. Chem., 167 (1993) 361.
S. F. Mughabghab, M. Divadeenam, N. E. Holden, Neutron Cross Sections, Vol. 1, Part A, Academic Press, 1981.
R. Benzing, S. J. Parry, N. M. Baghini, J. A. Davies,The Science of the Total Environment, 130/131 (1993) 267.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Thompson, D., Parry, S.J. & Benzing, R. Evaluation of nuclear effects in the analysis of plastics by neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry Letters 187, 255–263 (1994). https://doi.org/10.1007/BF02166553
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02166553