Abstract
The main results of scientific research carried out at the S. P. Timoshenko Institute of Mechanics of the National Academy of Sciences of Ukraine in the field of three-dimensional problems of the statics of anisotropic bodies are stated in a systematic form. The results include the structural method of constructing the exact analytical solutions of equations of the elastic and thermoelastic equilibrium of rectilinearly orthotropic bodies and approximate analytical methods of solving three-dimensional boundary-value problems for curvilinearly orthotropic bodies of canonical and noncanonical form. Results of solution of specific boundary-value problems for orthotropic and transversally isotropic bodies are analyzed.
Similar content being viewed by others
References
A. Ya. Aleksandrov, “Representation of the components of the three-dimensional axisymmetric state of a transversally isotropic body using functions of complex variable and contour integrals,”Izv. Akad. Nauk SSSR Mekh. Mashinostr., No. 2, 149–152 (1969).
A. Ya. Aleksandrov and V. S. Vol'pert, “Solution of three-dimensional problems of the theory of elasticity for a transversally isotropic body using analytical functions,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 82–91 (1967).
A. Ya. Aleksandrov and Yu. I. Solov'ev,Three-Dimensional Problems of the Theory of Elasticity [in Russian], Nauka, Moscow (1978).
K. S. Aleksandrov and T. V. Ryzhova, “The elastic properties of crystals (review),”Kristallografiya,6, No. 2, 289–314 (1961).
E. V. Altukhov, A. S. Kosmodamianskii, and V. A. Shaldyrvan, “The bending of a thick ring plate,”Izv. Akad. Nauk Arm. SSR Mekh.,28, No. 6, 66–72 (1975).
S. A. Ambartsumyan,Theory of Anisotropic Plates [in Russian], Nauka, Moscow (1967).
S. A. Ambartsumyan,General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).
E. K. Ashkenazi,Anisotropy of Machine-Building Materials [in Russian], Mashinostroyeniye, Leningrad (1969).
E. K. Ashkenazi and É. V. Ganov,Anisotropy of Structural Materials: A Reference Book [in Russian], Lesn. Prom., Leningrad (1980).
E. K. Ashkenazi and A. S. Morozov, “A technique for experimental investigation of the elastic properties of composite materials,”Zavod. Labor., No. 6, 731–735 (1976).
I. Yu. Babich and B. Yu. Nemish, “The axisymmetric stress state of orthotropic cylinders under nonuniform pressure,”Abstracts of Papers Read at the Voronezh Sch. Modern Problems of Mechanics and Applied Mathematics [in Russian], Voronezh (1998), p. 29.
I. Yu. Babich and B. Yu. Nemish, “The three-dimensional thermostress state of transversally isotropic composite plates under nonuniform heat,”Abstracts of Papers Read at Intern. Conf. Dynamical Syst. Model. Stab. Invest. [in Russian], Kiev (1999), p. 7.
É. N. Bayda, “The general solution of equilibrium equations for anisotropic and isotropic bodies,”Izv. Vuzov Str. Arkh., No. 6, 17–27 (1958).
É. N. Bayda, “The method of three functions for an anisotropic body,” in:Sb. Nauchn. Tr. Leningrad. Inzh.-Str. Inst., Issue 29 (1958), pp. 17–45.
É. N. Bayda, “Pleonisms in the general solution of the equilibrium equations in displacements for an anisotropic body,”Izv. Vuzov Str. Arkh., No. 1, 27–37 (1959).
S. A. Batugin and R. K. Nirenburg, “Approximate dependence between the elastic constants of rock. Parameters of anisotropy,”Fiz.-Tekh. Probl. Razr. Polezn. Iskop.,7, No. 1, 7–11 (1972).
Kh. B. Berkinov, “Functions of the stress tensor of an anisotropic elastic body,” in:Integration of Some Differential Equations of Mathematical Physics [in Russian], Nauka, Tashkent (1964), pp. 83–103.
Kh. B. Berkinov and N. M. Sayfullaev, “The tensor of stress functions for an anisotropic elastic body,”Dokl. Akad. Nauk Tadzh. SSR,10, No. 11, 13–15 (1967).
N. M. Bloshko, “The stress state of a transversally isotropic corrugated cylinder of finite dimensions,”Prikl. Mekh.,19, No. 2, 38–43 (1983).
N. M. Bloshko and Yu. N. Nemish, “Elastic equilibrium of transversally isotropic cylinders with perturbed lateral surfaces,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 4, 93–99 (1984).
N. M. Bloshko and Yu. N. Nemish, “The axisymmetric stress state of finite elastic cylinders with grooves of arbitrary shapes,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 6, 53–61 (1988).
Yu. V. Vasilevich and I. A. Prusov, “One method of solution of the first basic problem for an orthotropic half-space,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 2, 66–72 (1989).
Yu. V. Vasilevich and I. A. Prusov, “Stresses and displacements for an elastic orthotropic half-space under a normal load,”Teor. Prikl. Mekh., No. 3, 56–59 (1989).
B. F. Vlasov, “One case of bending of a rectangular thick plate,”Vestnik Moscovskogo Univ. Mat. Mekh., No. 2, 25–34 (1957).
V. S. Vol'pert, “Solution of the basic problems of the theory of elasticity for a transversally isotropic paraboloid and two-sheet hyperboloid of revolution,” in:Tr. Novosibirskogo Inst. Zhel.-Dor. Transp., Issue 96 (1970), pp. 158–165.
Sh. Kh. Ganev, “The complete solution of the three-dimensional problem of orthotropic continuous media in rectangular coordinates,” in:Proc. Inter. Conf. on Continuum Mechanic, Izd. Bolg. Akad. Nauk, Sofia (1968), pp. 123–134.
V. T. Golovchan,Anisotropy of the Physical-Mechanical Properties of Composite Materials [in Russian], Naukova Dumka, Kiev (1987).
Ya. M. Grigorenko and A. T. Vasilenko,Problems of the Statics of Anisotropic Inhomogeneous Shells [in Russian], Nauka, Moscow (1992).
Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova,The Statics of Anisotropic Thick-Walled Shells [in Russian], Naukova Dumka, Kiev (1985).
V. T. Grinchenko,The Equilibrium and Steady-State Vibrations of Elastic Finite Bodies [in Russian], Naukova Dumka, Kiev (1978).
A. N. Guz', “Representation of the solutions of three-dimensional axisymmetric problems of the theory of elasticity for a transversally isotropic body,”Dop. Akad. Nauk Ukr. SSR, No. 12, 1592–1595 (1963).
A. N. Guz' and Yu. N. Nemish,Perturbation Methods in Three-Dimensional Problems of the Theory of Elasticity [in Russian], Vyshcha Shkola, Kiev (1982).
A. N. Guz' and Yu. N. Nemish,The Statics of Elastic Noncanonical Bodies, Vol. 2 of the six-volumeThree-Dimensional Problems of the Theory of Elasticity and Plasticity [in Russian], (A. N. Guz', general editor), Naukova Dumka, Kiev (1984).
V. M. Deev, “Solution of the three-dimensional problem of theory of elasticity for an anisotropic medium,”Dop. Akad. Nauk Ukr. SSR, No. 7, 707–711 (1958).
V. M. Deev and N. S. Smirnov, “The general solution in the statics of an elastic medium in the case of curvilinear anisotropy,” in:Proc. 8th Sci.-Tech. Conf., Izd. Kharkov. Univ., Kharkov (1968), pp. 167–171.
A. A. Dorodnitsyn, “The use of the small-parameter method in the numerical solution of equations of mathematical physics,” in:Tr. Vychisl. Tsent. Akad. Nauk SSSR Numerical Solution of Problems of Continuum Mechanics [in Russian], Izd. Akad. Nauk SSSR, Moscow (1969), pp. 85–100.
M. Yu. Kashtalyan and Yu. N. Nemish, “Solution of three-dimensional boundary-value problems of the statics for orthotropic plates,”Dokl. Akad. Nauk Ukr. SSR, No. 10, 66–70 (1992).
M. Yu. Kashtalyan and Yu. N. Nemish, “The stress-strain state of transversally isotropic constant- and variable-thickness plates bent by localized loads,”Prikl. Mekh.,29, No. 3, 24–31 (1993) (Int. Appl. Mech.,29, No. 3, 189–194 (1993)).
M. Yu. Kashtalyan and Yu. N. Nemish, “The three-dimensional stress-strain state of bent rectangular orthotropic plates of variable thickness,”Prikl. Mekh.,30, No. 12, 39–48 (1994) (Int. Appl. Mech.,30, No. 12, 952–961 (1994)).
I. V. Kim, “On some problems of the theory of elasticity for an orthogonally isotropic half-space,” in:Sb. Tr. Tashkentskogo Inst. Inzh. Zhel.-Dor. Transp., Issue 56 (1968), pp. 51–62.
I. V. Kim, “The static problem for a orthogonally anisotropic elastic cylinder,”Dokl. Akad. Nauk Uz. SSR, No. 10, 3–5 (1968).
I. V. Kim, “Elastic equilibrium of infinite orthotropic space weakened by two elliptic slits,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 2, 74–80 (1972).
S. Clark,Handbook of Physical Constants [Russian translation], Nauka, Moscow (1969).
A. N. Guz', A. S. Kosmodamianskii, and V. P. Shevchenko (eds.),Stress Concentration, Vol. 7 of the 12-volumeMechanics of Composites [in Russian] (A. N. Guz', general editor), A.S.K., Kiev (1998).
A. S. Kosmodamianskii,The Stress State of Anisotropic Media with Openings or Cavities [in Russian], Vyshcha Shkola, Kiev-Donetsk (1976).
A. S. Kosmodamianskii and V. A. Galich, “The general solution of the three-dimensional problem of the theory of elasticity for a laminated orthotropic cylindrical shells,”Dokl. Akad. Nauk SSSR, Ser. A, No. 8, 46–48 (1984).
A. S. Kosmodamianskii and V. A. Shaldyrvan, “Determination of the stress state of multiply connected transtropic plates,”Prikl. Mat. Mekh.,39, No. 5, 909–917 (1975).
A. S. Kosmodamianskii and V. A. Shaldyrvan,Thick Multiply Connected Plates [in Russian], Naukova Dumka, Kiev (1978).
B. M. Koyalovich, “Analysis of infinite systems of linear algebraic equations,”Izv. Phys.-Mat. Inst. im. V. A. Steklova, No. 3, 41–167 (1930).
V. D. Kupradze, T. G. Gegelia, M. O. Basheleyshvili, and T. V. Burchuladze,Three-Dimensional Problems of the Mathematical Theory of Elasticity and Thermoelasticity [in Russian], Nauka, Moscow (1976).
S. G. Lekhnitskii,Anisotropic Plates [in Russian], Gostekhizdat, Moscow (1957).
S. G. Lekhnitskii,The Theory of Elasticity of an Anisotropic Body [in Russian], Nauka, Moscow (1977).
D. F. Lyalyuk, Yu. N. Nemish, and D. I. Chernopiskii, “Elastic equilibrium of thick-walled transversally isotropic nearly spherical shells,” in:Proc. 12th All-Union Conf. on the Theory of Shells and Plates, Vol. 3, Metsniereba, Yerevan (1980). pp. 38–44.
P. Marinov, “Stiffness of a prismatic solid with natural orthotropy under conditions of three-dimensional stress state,”Izv. Inst. Mekh., No. 4, 133–152 (1967).
P. Marinov, “Stiffness of a simply supported prismatic solid with natural orthotropy,”Izv. Inst. Tekh. Mekh., No. 4, 153–167 (1967).
Yu. I. Matyash, “The axisymmetric elastic equilibrium of a three-layer crossly corrugated transversally isotropic cylinder,”Prikl. Mekh.,19, No. 6, 39–46 (1983).
A. N. Guz' and S. D. Akbarov,Mechanics of Materials with Curved Structures, Vol. 4 of the 12-volumeMechanics of Composites [in Russian] (A. N. Guz', general editor), Naukova Dumka, Kiev (1995).
Z. Mossakowska, “Stress functions for elastic bodies possessing triaxial orthotropy,”Bull. Acad. Polon. Sci, Otd. 4,3, No. 1, 3–6 (1955).
Z. Mossakowska, “Stress functions for elastic bodies possessing triaxial orthotropy,”Arch. Mech. Stos.,7, No. 1, 87–96 (1955).
B. Yu. Nemish, “The stress state of orthotropic thick-walled cylinders under nonuniform pressure,”Prikl. Mekh.,34, No. 4, 61–68 (1998) (Int. Appl. Mech.,34, No. 4., 352–359 (1998)).
B. Yu. Nemish, “One approach to the solution of axisymmetric problems for spherically orthotropic bodies,” in:Theoretical and Applied Mechanics [in Russian], Issue 29 (1999), pp. 17–24.
B. Yu. Nemish, “Three-dimensional thermoelasticity problems for nonuniformly heated laminar transversally isotropic plates,”Prikl. Mekh.,35, No. 7, 95–103 (1999) (Int. Appl. Mech.,35, No. 7, 732–740 (1999)).
B. Yu. Nemish, “An analytical method of solving one class of three-dimensional problems of thermoelasticity for laminated transversally isotropic plates with variable thickness,” in:Theoretical and Applied Mechanics [in Russian], Issue 30 (1999), pp. 26–36.
B. Yu. Nemish, “Influence of anisotropy and boundary conditions on the thermoelastic equilibrium of nonuniformly heated laminated plates,”Prikl. Mekh.,35, No. 11, 96–105 (1999) (Int. Appl. Mech.,35, No. 11, 1173–1184 (1999)).
Yu. N. Nemish, “An approximate solution of three-dimensional problems of the theory of elasticity for a transversally isotropic medium,”Prikl. Mekh.,5, No. 8, 26–34 (1969).
Yu. N. Nemish, “The axisymmetric problem on the stress state of orthotropic elastic bodies,”Prikl. Meck.,7, No. 6, 17–24 (1971).
Yu. N. Nemish, “The method of small parameters in three-dimensional axisymmetric problems for cylindrically orthotropic bodies,”Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 3, 247–249 (1972).
Yu. N. Nemish, “An approximate method of analysis of the symmetric strain of orthotropic bodies,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 81–87 (1972).
Yu. N. Nemish, “An approximate method of solution of boundary-value problems of the mathematical theory of elasticity for an anisotropic medium,”Mat. Fiz., No. 11, 98–104 (1972).
Yu. N. Nemish, “An approximate method of solution of three-dimensional problems of the theory of elasticity of a curvilinearly orthotropic body for noncanonical domains,”Prikl. Mekh.,14, No. 7, 10–17 (1978).
Yu. N. Nemish,Elements of the Mechanics of Piecewise Homogeneous Bodies with Noncanonical Interfaces [in Russian], Naukova Dumka, Kiev (1989).
Yu. N. Nemish, “One class of the exact analytical solutions of the three-dimensional thermoelastic-equilibrium equations for orthotropic plates,”Prikl. Mekh.,36, No. 1, 78–87 (2000) (Int. Appl. Mech.,36, No. 1, 78–87 (2000)).
Yu. N. Nemish and N. M. Bloshko,The Stress State of Elastic Cylinders with Grooves [in Russian], Nauka Dumka, Kiev (1987).
Yu. N. Nemish and M. Yu. Kashtalyan, “The stress-strain state of bent rectangular transversally isotropic plates of variable thickness,”Prikl. Mekh.,28, No. 6, 14–22 (1992) (Int. Appl. Mech.,28, No. 6, 352–359 (1992)).
Yu. N. Nemish and M. Yu. Kashtalyan, “The stress-strain state of bent transversally isotropic plates with constant and variable thickness,”Prikl. Mekh.,29, No. 3, 24–31 (1993) (Int. Appl. Mech.,29, No. 3, 189–194 (1993)).
Yu. N. Nemish, D. F. Lyalyuk, and D. I. Chernopiskii, “The thermoelastic equilibrium of thick-walled transversally isotropic nearly spherical shells,”Abstracts of Papers Read at 15th Sci. Conf. Thermal Strecey of Structural Elements, Kiev (1980).
Yu. N. Nemish and V. N. Nemish, “Torsion of orthotropic solids of revolution with noncanonical cavities and inclusions,”Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 6, 101–111 (1976).
Yu. N. Nemish and V. N. Nemish, “Solution of three-dimensional problems of the theory of clasticity of a transversally isotropic medium for noncanonical domains,”Prikl. Mekh.,12, No. 12, 73–82 (1976).
Yu. N. Nemish and V. N. Nemish, “The stress state of a transversally isotropic medium weakened by a closed conical cavity,”Mat. Fiz., No. 26, 110–114 (1979).
Yu. N. Nemish and V. N. Nemish, “The stress concentration near closed noncanoical cavities in transversally isotropic media,”Abstracts of Papers Read at Rep. Symp. on Stress Concentration, Donetsk (1983), pp. 80–81.
Yu. N. Nemish and I. Yu. Khoma, “Determination of the stress-strain state of nonthin transversally isotropic spherical shells with curvilinear openings,”Prikl. Mekh.,34, No. 6, 54–63 (1998) (Int. Appl. Mech.,34, No. 6, 552–560 (1998)).
Yu. N. Nemish and I. Yu. Khoma,Nonthin Transversally Isotropic Shells, Vol. 7, Chapter 10 of the 12-volumeMechanics of Composites [in Russian] (A. N. Guz', general editor), A.S.K., Kiev (1998), pp. 252–287.
Yu. N. Nemish, I. Yu. Khoma, and D. I. Chernopiskii, “Determination of the stress-strain state of nonthin transversally isotropic spherical shells with elastically stiffened curvilinear holes,”Prikl. Mekh.,35, No. 8, 18–28 (1999) (Int. Appl. Mech.,35, No. 8, 767–777 (1999)).
Yu. N. Nemish and D. I. Chernopiskii, “The axisymmetric stress state of deformable cylinders with variable thickness,”Prikl. Mekh.,11, No. 10, 9–18 (1975).
Yu. N. Nemish and D. I. Chernopiskii, “An asymptotic method of analysis of thick-walled shells bounded by noncoordinate surfaces,” in:Proc. 10th All-Union Conf. on the Theory of Shells and Plates, Vol. 1, Tbilisi (1975), pp. 235–243.
Yu. N. Nemish and D. I. Chernopiskii, “Some axisymmetric boundary-value problems of the statics of crossly corrugated laminated cylinders,”Prikl. Mekh.,13, No. 6, 38–46 (1977).
Yu. N. Nemish and D. I. Chernopiskii, “Some three-dimensional boundary-value problems for longitudinally corrugated thick-walled cylinders,”Prikl. Mekh.,14, No. 3, 34–44 (1978).
Yu. N. Nemish and D. I. Chernopiskii,Elastic Equilibrium of Corrugated Bodies [in Russian], Naukova Dumka, Kiev (1983).
V. L. Novatskii, “The stress function in three-dimensional problems of an elastic body with transversal isotropy,”Bull. Acad. Polon. Sci Otd. 4,4, No. 1, 21–25 (1954).
Yu. Novinskii, V. Ol'shak, and V. Urbanskii, “The thermoelastic problem for media possessing curvilinear orthotropy,”Bull. Acad. Polon. Sci Otd. 4,4, No. 2, 105–112 (1956).
V. V. Novozhilov,The Theory of Elasticity [in Russian], Sudpromgiz, Leningrad (1958).
V. G. Piskunov, V. S. Sipetov, and Sh. Sh. Tuimetov, “Bending of a thick transversally isotropic plate by a transversal load,”Prikl. Mekh.,23, No. 11, 21–26 (1987).
V. G. Piskunov, V. S. Sipetov, and Sh. Sh. Tuimetov, “Solution of problems of the statics for laminated orthotropic plates in spatial formulation,”Prikl. Mekh.,26, No. 2, 41–49 (1990).
Yu. N. Podil'chuk,Three-Dimensional Problems of the Theory of Elasticity [in Russian], Naukova Dumka, Kiev (1979).
Yu. N. Podil'chuk,Boundary Problems of the Statics of Elastic Bodies, Vol. 1 of the six-volumeSpatial Problems of the Theory of Elasticity and Plasticity [in Russian], (A. N. Guz', general editor), Naukova Dumka, Kiev (1984).
Yu. N. Podil'chuk, “The exact analytical solutions of three-dimensional boundary-value problems of the statics of a transversally isotropic canonical body (review),”Prikl. Mekh.,33, No. 10, 3–30 (1997) (Int. Appl. Mech.,33, No. 10, 763–787 (1997)).
Yu. N. Podil'chuk, “Representation of the general solution of equations for a transversally isotropic piezoceramic body in terms of harmonic functions,”Prikl. Mekh.,34, No. 7, 20–26 (1998) (Int. Appl. Mech.,34, No. 7, 623–628 (1998)).
Yu. N. Podil'chuk and A. H. Passoss Morgado, “Representation of the general solution of the equations of static thermoelectroelasticity of a transversally isotropic piezoceramic body in terms of potential functions,” in:Theoretical and Applied Mechanics [in Russian], Issue 29 (1999), pp. 42–51.
A. P. Prusakov, “Functions of displacements in problems of the theory of elasticity,”Prikl. Mekh.,35, No. 5, 64–68 (1999) (Int. Appl. Mech.,35, No. 5, 488–492 (1999)).
I. A. Prusov and Yu. V. Vasilevich, “A new representation of the general formulas of the theory of elasticity for an orthotropic body subject to a normal load,”Vesn. Belorus Univ., Ser. 1, No. 2, 42–46 (1991).
A. L. Rabinovich, “Elastic constants and strength of air materials,”Tr. TsAGI, No. 582, 1–56 (1946).
A. L. Rabinovich,An Introduction to the Mechanics of Reinforced Polymers [in Russian], Nauka, Moscow (1970).
G. N. Savin and Yu. N. Nemish, “The method of perturbation of elastic properties in the mechanics of rigid deformable bodies,”Dokl. Akad. Nauk SSSR,216, No. 1, 53–55 (1974).
V. S. Sarkisyan,Some Problems of the Theory of Elasticity of an Anisotropic Body [in Russian], Izd. Yerevanskogo Univ., Yerevan (1976).
V. M. Sobolevskii, “The elastic stress state of an anisotropic spherical shell under internal and external pressures and a radial thermal flow,”Dokl. Akad. Nauk Belorus. SSR,2, No. 4, 147–155 (1958).
Yu. I. Solov'ev, “Solution of the axisymmetric problem of the theory of elasticity for transversally isotropic bodies using generalized analytical functions,”Prikl. Mat. Mekh.,38, No. 2, 379–384 (1974).
V. T. Golovchan (ed.),Statics of Materials, Vol. 1 of the 12-volumeMechanics of Composites [in Russian] (A. N. Guz', general editor), Naukova Dumka, Kiev (1993).
Ya. M. Grigorenko (ed.),Statics of Structural Elements, Vol. 8 of the 12-volumeMechanics of Composites [in Russian] (A. N. Guz', general editor), A.S.K., Kiev (1999).
L. P. Khoroshun (ed.),Statistical Mechanics and Effective Properties of Materials, Vol. 3 of the 12-volumeMechanics of Composites (A. N. Guz', general editor) [in Russian], Naukova Dumka, Kiev (1993).
G. Hantington, “Elastic constants of crystals,”Usp. Fiz. Mat. Nauk,74, No. 3, 462–520 (1961).
G. M. Khatiashvili,The Almansi-Mitchel Problems for Homogeneous and Compound Bodies [in Russian], Part 1, Metsniereba, Tbilisi (1983).
A. G. Khatkevich, “Elastic constants of crystals,”Kristallografiya,6, No. 5, 700–703 (1961).
I. Yu. Khoma,The Generalized Theory of Anisotropic Shells [in Russian], Naukova Dumka, Kiev (1986).
W. T. Chen, “On some problems in transversally isotropic elastic materials,”Trans. ASME, Ser. E. Prikl. Mekh.,33, No. 2, 98–107 (1966).
W. T. Chen, “On some problems in elastic materials with spherical isotropy,”Trans. ASME, Ser. E. Prikl. Mekh,33, No. 3, 71–79 (1966).
N. G. Chentsov, “Examination of veneer as an anisotropic plate,”Tekhn. Zamet. TsAGI, No. 91, 1–27 (1936).
V. A. Shaldyrvan, A. A. Sumtsov, and V. A. Soroka, “Study of stress concentration in short hollow cylinders made of transversally isotropic materials,”Prikl. Mekh.,35, No. 7, 43–48 (1999) (Int. Appl. Mech.,35, No. 7, 678–683 (1999)).
F. Auerbach, “Elastizität der Kristalle,” in:Handbuch der physikalishe und techniche Mechanik, B.3, Leipzig (1927), pp. 239–282.
C. J. Bozs,Teoria Elastlcitatii Corpurilor Anisotrope, Ed. Acad R.S. Romania, Bucuresti (1970).
A. L. Cauchy, “Surles equations differentielles d'equilibre ou de mouvement pour un system de points materials,”Ex.de Math., No. 4 (1829).
W. T. Chen, “An elastic orthotropic ellipsoid in a centrifugal force field,”Trans. ASME, Ser. E,36, No. 2, 313–316 (1969).
W. T. Chen, “Stresses in some anisotropic materials due to indentation and sliding,”Int. J. Sol. Struct.,5, No. 3, 191–214 (1969).
A. H. Elliott, “Three-dimensional stress distributions in hexagonal aelotropic crystals,”Proc. Cambr. Phil. Soc.,44, pt. 4, 522–533 (1948).
R. A. Eubanks and E. Sternberg, “On the axisymmetric problem of elasticity theory for a medium with transverse isotropy,”J. Rational Mech. Analys.,3, No. 1, 89–101 (1954).
A. E. Green and W. Zerna,Theoretical Elasticity, Univ. Press, Oxford (1954).
H. Grüters, “Iterative Lösung von Lastspannungsproblemen in anisotropen Korpern,”Z. Angew. Math. Mech.,54, No. 4, 79–80 (1974).
Hata Kin-ichi, “Some remarks on the three-dimensional problems concerned with the isotropic and anisotropic elastic solids,”Mem. Fac. Engng. Hokkaido Univ.,10, No. 2, 129–177 (1956).
Hata Kin-ichi, “On the method for solving three-dimensional elasticity problems in orthotropic solids,” in:Proc. 6th Japan. Nat. Congr. Appl. Mech., Tokyo (1957) pp. 43–46.
M. Hayes, “On the displacement boundary-value problem in linear elastostatics,”Quart. J. Mech. Appl. Math.,19, No. 2, 151–155 (1966).
R. F. S. Hearmon,An Introduction to Applied Anisotropic Elasticity, S. 1, Oxford Univ. Press, London (1961).
L. R. Hermann, “Stress functions for axisymmetric, orthotropic, elasticity equations,”AIAAT, No. 2, 1822–1824 (1964).
Hu Hai-Chang, “On the three-dimensional problems of the theory of elasticity of a transversely isotropic body,”Acta. Sci. Sinica.,2, No. 2, 145–151 (1953).
Hu Hai-Chang, “On the equilibrium and vibration of a transversely isotropic elastic body,” Sci. Sinica.,5, No. 1, 1–18 (1956).
S. Kaliski, “On a conception of basis solutions for orthotropic elastic and inelastic bodies,”Arch. Mech. Stos., No. 11, 45–60 (1959).
A. S. Lodge, “The transformation to isotropic form of the equilibrium equations for a class of anisotropic elastic solids,”Quart. J. Mech. Appl. Math.,8, No. 2, 211–225 (1955).
Z. Mossakowska, “Stress functions of elastic bodies with three-dimensional orthotropy,”Bull. Acad. Polon. Sci., No. 1, 3–6 (1955).
B. Saint-Venant, “Metoire sur les divers genres d'homogenete des corps solids,”Journ. de math. pures et appl.,10, 297–349 (1865).
I. Todhunter and K. Person,A History of the Theory of Elasticity and of the Strength of Materials, Cambridge (1893).
W. Voigt,Lerbuch der Kristallphysik (Teubner), Leibzig-Berlin (1928).
Additional information
S. P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 36, No. 2, pp. 3–38, February, 2000.
Rights and permissions
About this article
Cite this article
Nemish, Y.N. Development of analytical methods in three-dimensional problems of the statics of anisotropic bodies (Review). Int Appl Mech 36, 135–172 (2000). https://doi.org/10.1007/BF02681992
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02681992