Abstract
Microgels prepared without exogenous crosslinker have recently been explored for diverse applications in biotechnology. However, our fundamental understanding of structure-property relationships for this class of materials is still lacking, especially in the context of more complex structures such as core-shell particles. In this article, core-shell microgels were prepared by seed-mediated, surfactant-free emulsion polymerization using a N,N′-methylenebis (acrylamide) (BIS) cross-linked poly(N-isopropylacrylamide) (pNIPAm) microgel core upon which a crosslinker-free poly(N-isopropylacrylamide)-co-acrylic acid (ULC10AAc) shell was synthesized. Dynamic light scattering (DLS) and phase analysis light scattering (PALS) measurements show that the hydrodynamic radius and electrophoretic mobility of the core-shell microgels increase significantly with increasing pH due to the pH responsive ULC10AAc shell, while the temperature sensitivity of the microgels is also strongly pH dependent. The turbidity and the temperature-dependent scattering intensity plots of microgels at different pH also provide insight into the charged state of the microgels under the studied conditions. For example, we observe multiple temperature-induced transitions when the pH is either 4.5 or 6.5, illustrating that the core and shell domains, while remaining mechanically connected, are only partially coupled thermodynamically. These studies provide insight into the perturbation of ULC microgel behavior that might be brought about due to the presence of a higher density core region. Complex architectures such as these are relevant in biotechnology applications where the soft, deformable ULC shell is advantageous to control the polymer-biology interface, but a denser core region might be required to obtain a higher loading of encapsulated therapeutics, tracking dyes, or oligonucleotides. Thus, it is important to understand the synthetic conditions that allow a ULC shell to remain “ULC-like” despite the presence of a denser core.
Similar content being viewed by others
References
Peppas NA, Merrill EW (1977) Crosslinked poly (vinyl alcohol) hydrogels as swollen elastic networks. J Appl Polym Sci 21(7):1763–1770. https://doi.org/10.1002/app.1977.070210704
Jones CD, Lyon LA (2000) Synthesis and characterization of multiresponsive core-shell microgels. Macromolecules 33(22):8301–8306. https://doi.org/10.1021/ma001398m
Pelton RH, Chibante P (1986) Preparation of aqueous latexes with N-isopropylacrylamide. Colloids Surf 20(3):247–256. https://doi.org/10.1016/0166-6622(86)80274-8
Zhou S, Chu B (1998) Synthesis and volume phase transition of poly (methacrylic acid-co-N-isopropylacrylamide) microgel particles in water. J Phys Chem B 102(8):1364–1371. https://doi.org/10.1021/JP972990P
Crowther HM, Saunders BR, Mears SJ, Cosgrove T, Vincent B, King SM, Yu G-E (1999) Poly (NIPAM) microgel particle de-swelling: a light scattering and small-angle neutron scattering study. Colloids Surf A Physicochem Eng Asp 152(3):327–333. https://doi.org/10.1016/S0927-7757(98)00875-9
Saunders BR (2004) On the structure of poly(N-isopropylacrylamide) microgel particles. Langmuir 20(10):3925–3932. https://doi.org/10.1021/la036390v
Gaulding JC, Spears MW, Lyon LA (2013) Plastic deformation, wrinkling, and recovery in microgel multilayers. Polym Chem 4(18):4890–4896. https://doi.org/10.1039/C3PY00173C
Debord JD, Lyon LA (2003) Synthesis and characterization of pH-responsive copolymer microgels with tunable volume phase transition temperatures. Langmuir 19(18):7662–7664. https://doi.org/10.1021/la0342924
Kim J, Nayak S, Lyon LA (2005) Bioresponsive hydrogel microlenses. J Am Chem Soc 127(26):9588–9592. https://doi.org/10.1021/ja0519076
Karg M, Pich A, Hellweg T, Hoare T, Lyon LA, Crassous JJ, Suzuki D, Gumerov RA, Schneider S, Potemkin II, Richtering W (2019) Nanogels and microgels: from model colloids to applications, recent developments, and future trends. Langmuir 35(19):6231–6255. https://doi.org/10.1021/acs.langmuir.8b04304
Hoare T, Pelton R (2007) Engineering glucose swelling responses in poly(N-isopropylacrylamide)-based microgels. Macromolecules 40(3):670–678. https://doi.org/10.1021/ma062254w
Smeets NMB, Hoare T (2013) Designing responsive microgels for drug delivery applications. Journal of Polymer Science Part a-Polymer Chemistry 51(14):3027–3043. https://doi.org/10.1002/pola.26707
Kim J, Singh N, Lyon LA (2006) Label-free biosensing with hydrogel microlenses. Angew Chem Int Ed 45(9):1446–1449. https://doi.org/10.1002/anie.200503102
Serpe MJ, Yarmey KA, Nolan CM, Lyon LA (2005) Doxorubicin uptake and release from microgel thin films. Biomacromolecules 6(1):408–413. https://doi.org/10.1021/bm049455x
Smith MH, Lyon LA (2012) Multifunctional nanogels for siRNA delivery. Acc Chem Res 45(7):985–993. https://doi.org/10.1021/ar200216f
Islam MR, Li X, Smyth K, Serpe MJ (2013) Polymer-based muscle expansion and contraction. Angew Chem Int Ed 52(39):10330–10333. https://doi.org/10.1002/anie.201303475
Islam MR, Serpe MJ (2014) A novel label-free colorimetric assay for DNA concentration in solution. Anal Chim Acta 843:83–88. https://doi.org/10.1016/j.aca.2014.06.038
Pelton R (2000) Temperature-sensitive aqueous microgels. Adv Colloid Interf Sci 85(1):1–33. https://doi.org/10.1016/S0001-8686(99)00023-8
Daly E, Saunders BR (2000) Temperature-dependent electrophoretic mobility and hydrodynamic radius measurements of poly(N-isopropylacrylamide) microgel particles: structural insights. Phys Chem Chem Phys 2(14):3187–3193. https://doi.org/10.1039/b002678f
Saunders BR, Vincent B (1996) Thermal and osmotic deswelling of poly (NIPAM) microgel particles. J Chem Soc Faraday Trans 92(18):3385–3389. https://doi.org/10.1039/ft9969203385
Wu C, Zhou S, Au-Yeung SCF, Jiang S (1996) Volume phase transition of spherical microgel particles. Angew Makromol Chem 240:123–136
Zhu PW, Napper DH (1994) Entanglement knotting in globule-to-coil transitions of poly(N-isopropylacrylamide) at interfaces. J Colloid Interface Sci 168(2):380–385. https://doi.org/10.1006/jcis.1994.1433
Hoare T, Pelton R (2004) Functional group distributions in carboxylic acid containing poly(N-isopropylacrylamide) microgels. Langmuir 20(6):2123–2133. https://doi.org/10.1021/la0351562
Hoare T, Pelton R (2007) Functionalized microgel swelling: comparing theory and experiment. J Phys Chem B 111(41):11895–11906. https://doi.org/10.1021/jp072360f
Bachman H, Brown AC, Clarke KC, Dhada KS, Douglas A, Hansen CE, Herman E, Hyatt JS, Kodlekere P, Meng Z, Saxena S, Spears Jr MW, Welsch N, Lyon LA (2015) Ultrasoft, highly deformable microgels. Soft Matter 11(10):2018–2028. https://doi.org/10.1039/C5SM00047E
Brown AC, Stabenfeldt SE, Ahn B, Hannan RT, Dhada KS, Herman ES, Stefanelli V, Guzzetta N, Alexeev A, Lam WA, Lyon LA, Barker TH (2014) Ultrasoft microgels displaying emergent platelet-like behaviours. Nat Mater 13(12):1108–1114. https://doi.org/10.1038/nmat4066
Hansen CE, Myers DR, Baldwin WH, Sakurai Y, Meeks SL, Lyon LA, Lam WA (2017) Platelet-microcapsule hybrids leverage contractile force for targeted delivery of hemostatic agents. ACS Nano 11(6):5579–5589. https://doi.org/10.1021/acsnano.7b00929
Gaulding JC, South AB, Lyon LA (2013) Hydrolytically degradable shells on thermoresponsive microgels. Colloid Polym Sci 291(1):99–107. https://doi.org/10.1007/s00396-012-2692-0
Hu X, Tong Z, Lyon LA (2010) Multicompartment core/shell microgels. J Am Chem Soc 132(33):11470–11472. https://doi.org/10.1021/ja105616v
Jones CD, Lyon LA (2003) Dependence of shell thickness on core compression in acrylic acid modified poly(N-isopropylacrylamide) core/shell microgels. Langmuir 19(11):4544–4547. https://doi.org/10.1021/la034392+
Jones CD, Lyon LA (2003) Shell-restricted swelling and core compression in poly(N-isopropylacrylamide) core-shell microgels. Macromolecules 36(6):1988–1993. https://doi.org/10.1021/ma021079q
Berndt I, Pedersen JS, Lindner P, Richtering W (2006) Structure of doubly temperature sensitive core-shell microgels based on poly-N-isopropylacrylamide and poly-N-isopropylmethacrylamide. Progr Colloid Polym Sci 133:35–40. https://doi.org/10.1007/2882_048
Berndt I, Pedersen JS, Lindner P, Richtering W (2006) Influence of shell thickness and cross-link density on the structure of temperature-sensitive poly-N-isopropylacrylamide-poly-N-isopropylmethacrylamide Core-Shell microgels investigated by small-angle neutron scattering. Langmuir 22(1):459–468. https://doi.org/10.1021/la052463u
Zeiser M, Freudensprung I, Hellweg T (2012) Linearly thermoresponsive core–shell microgels: towards a new class of nanoactuators. Polymer 53(26):6096–6101. https://doi.org/10.1016/j.polymer.2012.10.001
Pinprayoon O, Groves R, Lovell PA, Tungchaiwattana S, Saunders BR (2011) Polymer films prepared using ionically crosslinked soft core–shell nanoparticles: a new class of nanostructured ionomers. Soft Matter 7(1):247–257. https://doi.org/10.1039/C0SM00447B
Tungchaiwattana S, Groves R, Lovell PA, Pinprayoon O, Saunders BR (2012) Tuning the mechanical properties of nanostructured ionomer films by controlling the extents of covalent crosslinking in core-shell nanoparticles. J Mater Chem 22(12):5840–5847. https://doi.org/10.1039/C2JM16223G
Suzuki D, McGrath JG, Kawaguchi H, Lyon LA (2007) Colloidal crystals of thermosensitive, core/shell hybrid microgels. J Phys Chem C 111(15):5667–5672. https://doi.org/10.1021/jp068535n
Serpe MJ, Jones CD, Lyon LA (2003) Layer-by-layer deposition of thermoresponsive microgel thin films. Langmuir 19(21):8759–8764. https://doi.org/10.1021/la034391h
South AB, Whitmire RE, García AJ, Lyon LA (2009) Centrifugal deposition of microgels for the rapid assembly of nonfouling thin films. ACS Appl Mater Interfaces 1(12):2747–2754. https://doi.org/10.1021/am9005435
Tanaka T, Fillmore DJ (1979) Kinetics of swelling of gels. J Chem Phys 70(3):1214–1218. https://doi.org/10.1063/1.437602
Matsuo ES, Tanaka T (1988) Kinetics of discontinuous volume–phase transition of gels. J Chem Phys 89(3):1695–1703. https://doi.org/10.1063/1.455115
Cors M, Wrede O, Wiehemeier L, Feoktystov A, Cousin F, Hellweg T, Oberdisse J (2019) Spatial distribution of core monomers in acrylamide-based core-shell microgels with linear swelling behaviour. Sci Rep 9(1):13812. https://doi.org/10.1038/s41598-019-50164-6
Islam MR, Tumbarello M, Lyon LA (2019) Deswelling induced morphological changes in dual pH- and temperature-responsive ultra-low cross-linked poly(N-isopropyl acrylamide)-co-acrylic acid microgels. Colloid Polym Sci 297(5):667–676. https://doi.org/10.1007/s00396-019-04492-8
Jones CD, Lyon LA (2003) Dependence of shell thickness on vore compression in acrylic acid modified poly(N-isopropylacrylamide) core/shell microgels. Langmuir 19(11):4544–4547. https://doi.org/10.1021/la034392+
Jones CD, McGrath JG, Lyon LA (2004) Characterization of cyanine dye-labeled poly(N-isopropylacrylamide) core/shell microgels using fluorescence resonance energy transfer. J Phys Chem B 108(34):12652–12657. https://doi.org/10.1021/jp0361834
Funding
The study is financially supported by the National Institute of Health (R01HL130918).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
Dr. Lyon is a co-founder and holds an equity stake in SelSym, Inc., an early-stage biotechnology company aimed at the commercialization of artificial platelet technologies based on ULC microgels.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
ESM 1
(DOCX 2.14 mb)
Rights and permissions
About this article
Cite this article
Islam, M.R., Lyon, L.A. Deswelling studies of pH and temperature-sensitive ultra-low cross-linked microgels with cross-linked cores. Colloid Polym Sci 298, 395–405 (2020). https://doi.org/10.1007/s00396-020-04620-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00396-020-04620-9