Abstract
Silicon anisotropic wet etching is applied for fabricating round-shaped micro-structures in a size range of sub-microns. In this work, we demonstrate that arbitrary 2-D mask patterns having curved profile can be successfully transferred to deep-etched cavity profiles on a Si {100} wafer. The sub-micron mask is directly drawn on the Si wafer by irradiating focused ion beam to the wafer surface. Anisotropy in etch rate of Si using tetra-methyl ammonium hydroxide solution was modified and controlled by adding a surfactant Triton X-100 to the solution. Etched profile was conformal to etch mask patterns having smooth curvatures.
Similar content being viewed by others
References
Kawasegi N, Morita N, Yamada S, Takano N, Oyama T, Ashida K, Taniguchi J, Miyamoto I (2006) Three-dimensional nanofabrication utilizing selective etching of silicon induced by focused ion beam irradiation. JSME Int J Ser C Mech Syst Mach Elem Manuf 49:583–589. doi:10.1299/jsmec.49.583
Pal P, Sato K (2010) Fabrication methods based on wet etching process for the realization of silicon MEMS structures with new shapes. Microsyst Technol 16:1165–1174. doi:10.1007/s00542-009-0956-5
Pal P, Sato K, Gosalvez MA, Kimura Y, Ishibashi K, Niwano M, Hida H, Tang B, Itoh S (2009) Surfactant adsorption on single-crystal silicon surfaces in TMAH solution: orientation-dependent adsorption detected by in situ infrared spectroscopy. J Microelectromech Syst 18:1345–1356. doi:10.1109/JMEMS.2009.2031688
Pal P, Gosalvez MA, Sato K (2010) Silicon micromachining based on surfactant-added tetramethyl ammonium hydroxide: etching mechanism and advanced applications. Jpn J App Phys 49:056702. doi:10.1143/JJAP.49.056702
Sato K, Shikida M, Yamashiro T, Asaumi K, Iriye Y, Yamamoto M (1999) Anisotropic etching rates of single-crystal silicon for TMAH water solution as a function of crystallographic orientation. Sens Actuators A 73:131–137. doi:10.1016/S0924-4247(98)00271-4
Schmidt B, Bischoff L, Teichert J (1997) Writing FIB implantation and subsequent anisotropic wet chemical etching for fabrication of 3D structures in silicon. Sens Actuators A 61:369–373. doi:10.1016/S0924-4247(97)80291-9
Sekimura M (1999) Anisotropic etching of surfactant-added TMAH solution. In: Proceedings of the IEEE MEMS-99, Orlando, 1999, pp 650–655
Tanaka H, Yamashita S, Abe Y, Shikida M, Sato K (2004) Fast etching of silicon with a smooth surface in high temperature ranges near the boiling point of KOH solution. Sens Actuators A 114:526–530. doi:10.1016/j.sna.2003.11.036
Tanaka H, Cheng D, Shikida M, Sato K (2006) Characterization of anisotropic etching properties of single crystal silicon: Effects of ppb-level of Cu and Pb in KOH solution. Sens Actuators A 128–1:125–130. doi:10.1016/j.sna.2006.01.011
Zubel I, Kramkowska M (2002) The effect of alcohol additives on etching characteristics in KOH solutions. Sens Actuators A 101:255–261
Acknowledgments
The authors thank to Nanotechnology Support Project in Central Japan for the FIB and FE-SEM facility support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tanaka, H., Hida, H. & Sato, K. Fabrication of curved sub-micron Si structures by a combination of anisotropic etching using surfactant-added TMAH solution and FIB direct-drawn mask. Microsyst Technol 19, 1065–1067 (2013). https://doi.org/10.1007/s00542-012-1700-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-012-1700-0