Abstract
Rapid prototyping (RP) is a molding technique that builds a three-dimensional (3D) model from computer-aided design (CAD) data. We fabricated new tailor-made bone implants (TIs) from α-tricalcium phosphate powder using an RP ink-jet printer based on computed tomography (CT) data, and evaluated their safety and efficacy. CT data of the skulls of seven beagle dogs were obtained and converted to CAD data, and bone defects were virtually made in the skull bilaterally. TIs were designed to fit the defects and were fabricated using the 3D ink-jet printer with six horizontal cylindrical holes running through the implants, designed for possible facilitation of vascular invasion and bone regeneration. As a control, hydroxyapatite implants (HIs) were cut manually from porous hydroxyapatite blocks. Then, craniectomy was performed to create real skull defects, and TIs and HIs were implanted. After implantation, CT was performed regularly, and the animals were euthanized at 24 weeks. No major side effects were observed. CT analysis showed narrowing of the cylindrical holes; bony bridging between the implants and the temporal bone was observed only for TIs. Histological analysis revealed substantial new bone formation inside the cylindrical holes in the TIs, while mainly connective tissues invaded the porous structures in HIs. Bone marrow was observed only in TIs. Osteoclasts were seen to resorb regenerated bone from inside the cylindrical holes and to invade and probably resorb the TIs. These data suggest that TIs are a safe and effective bone substitute, possessing osteoconductivity comparable with that of HIs.
Similar content being viewed by others
References
P Tessier H Kawamoto D Matthews J Posnick Y Raulo JF Tulasne SA Wolfe (2005) ArticleTitleAutogenous bone grafts and bone substitutes – tools and techniques: I. A 20 000-case experience in maxillofacial and craniofacial surgery Plast Reconstr Surg 116 IssueID5 Suppl 6S–24S Occurrence Handle16217441 Occurrence Handle10.1097/01.prs.0000173862.20563.12 Occurrence Handle1:CAS:528:DC%2BD2sXkt1OnsA%3D%3D
BL Eppley WS Pietrzak MW Blanton (2005) ArticleTitleAllograft and alloplastic bone substitutes: a review of science and technology for the craniomaxillofacial surgeon J Craniofac Surg 16 IssueID6 981–989 Occurrence Handle16327544 Occurrence Handle10.1097/01.scs.0000179662.38172.dd
PV Giannoudis H Dinopoulos E Tsiridis (2005) ArticleTitleBone substitutes: an update Injury 36 IssueIDSuppl 3 S20–S27 Occurrence Handle16188545 Occurrence Handle10.1016/j.injury.2005.07.029
M Mastrogiacomo A Muraglia V Komlev F Peyrin F Rustichelli A Crovace R Cancedda (2005) ArticleTitleTissue engineering of bone: search for a better scaffold Orthod Craniofac Res 8 IssueID4 277–284 Occurrence Handle16238608 Occurrence Handle10.1111/j.1601-6343.2005.00350.x Occurrence Handle1:STN:280:DC%2BD2MnisVekug%3D%3D
SM Kenny M Buggy (2003) ArticleTitleBone cements and fillers: a review J Mater Sci Mater Med 14 IssueID11 923–938 Occurrence Handle15348504 Occurrence Handle10.1023/A:1026394530192 Occurrence Handle1:CAS:528:DC%2BD3sXosFajsbs%3D
S Lalan I Pomerantseva JP Vacanti (2001) ArticleTitleTissue engineering and its potential impact on surgery World J Surg 25 IssueID11 1458–1466 Occurrence Handle11760750 Occurrence Handle10.1007/s00268-001-0131-3 Occurrence Handle1:STN:280:DC%2BD38%2FjtlSmtQ%3D%3D
AS Breitbart DA Staffenberg CH Thorne PM Glat NS Cunningham AH Reddi J Ricci G Steiner (1995) ArticleTitleTricalcium phosphate and osteogenin: a bioactive onlay bone graft substitute Plast Reconstr Surg 96 IssueID3 699–708 Occurrence Handle7638295 Occurrence Handle10.1097/00006534-199509000-00024 Occurrence Handle1:STN:280:ByqA28rkslc%3D
S Rupprecht HA Merten P Kessler J Wiltfang (2003) ArticleTitleHydroxyapatite cement (BoneSource) for repair of critical sized calvarian defects – an experimental study J Craniomaxillofac Surg 31 IssueID3 149–153 Occurrence Handle12818599
PA Webb (2000) ArticleTitleA review of rapid prototyping (RP) techniques in the medical and biomedical sector J Med Eng Technol 24 IssueID4 149–153 Occurrence Handle11105287 Occurrence Handle10.1080/03091900050163427 Occurrence Handle1:STN:280:DC%2BD3MzgtlGmtA%3D%3D
S Lohfeld V Barron PE McHugh (2005) ArticleTitleBiomodels of bone: a review Ann Biomed Eng 33 IssueID10 1295–1311 Occurrence Handle16240079 Occurrence Handle10.1007/s10439-005-5873-x Occurrence Handle1:STN:280:DC%2BD2MrmtFyntg%3D%3D
A Curodeau E Sachs S Caldarise (2000) ArticleTitleDesign and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell J Biomed Mater Res 53 IssueID5 525–535 Occurrence Handle10984701 Occurrence Handle10.1002/1097-4636(200009)53:5<525::AID-JBM12>3.0.CO;2-1 Occurrence Handle1:CAS:528:DC%2BD3cXntVejsLo%3D
H Seitz W Rieder S Irsen B Leukers C Tille (2005) ArticleTitleThree-dimensional printing of porous ceramic scaffolds for bone tissue engineering J Biomed Mater Res B Appl Biomater 74 IssueID2 782–788 Occurrence Handle15981173
W Sun A Darling B Starly J Nam (2004) ArticleTitleComputer-aided tissue engineering: overview, scope and challenges Biotechnol Appl Biochem 39 IssueIDPt 1 29–47 Occurrence Handle14563211 Occurrence Handle1:CAS:528:DC%2BD2cXls1Gntg%3D%3D Occurrence Handle10.1042/BA20030108
S Limpanuphap B Derby (2002) ArticleTitleManufacture of biomaterials by a novel printing process J Mater Sci Mater Med 13 IssueID12 1163–1166 Occurrence Handle15348660 Occurrence Handle10.1023/A:1021146106442 Occurrence Handle1:CAS:528:DC%2BD38XoslGmtrY%3D
M Lee JC Dunn BM Wu (2005) ArticleTitleScaffold fabrication by indirect three-dimensional printing Biomaterials 26 IssueID20 4281–4289 Occurrence Handle15683652 Occurrence Handle10.1016/j.biomaterials.2004.10.040 Occurrence Handle1:CAS:528:DC%2BD2MXotVKhuw%3D%3D
H Hao N Amizuka K Oda N Fujii H Ohnishi A Okada S Nomura T Maeda (2004) ArticleTitleA histological evaluation on self-setting alpha-tricalcium phosphate applied in the rat bone cavity Biomaterials 25 IssueID3 431–442 Occurrence Handle14585691 Occurrence Handle10.1016/S0142-9612(03)00550-7 Occurrence Handle1:CAS:528:DC%2BD3sXotlyntro%3D
S Kokubo M Mochizuki S Fukushima T Ito K Nozaki T Iwai K Takahashi S Yokota K Miyata N Sasaki (2004) ArticleTitleLong-term stability of bone tissues induced by an osteoinductive biomaterial, recombinant human bone morphogenetic protein-2 and a biodegradable carrier Biomaterials 25 IssueID10 1795–1803 Occurrence Handle14738843 Occurrence Handle10.1016/j.biomaterials.2003.08.030 Occurrence Handle1:CAS:528:DC%2BD2cXktlWnsA%3D%3D
SJ Hollister CY Lin E Saito CY Lin RD Schek JM Taboas JM Williams B Partee CL Flanagan A Diggs EN Wilke GH Van Lenthe R Muller T Wirtz S Das SE Feinberg PH Krebsbach (2005) ArticleTitleEngineering craniofacial scaffolds Orthod Craniofac Res 8 IssueID3 162–173 Occurrence Handle16022718 Occurrence Handle10.1111/j.1601-6343.2005.00329.x Occurrence Handle1:STN:280:DC%2BD2Mzmslegsw%3D%3D
P Habibovic TM Sees MA van den Doel CA van Blitterswijk K de Groot (2006) ArticleTitleOsteoinduction by biomaterials – physicochemical and structural influences J Biomed Mater Res A 77 IssueID4 747–762 Occurrence Handle16557498
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Igawa, K., Mochizuki, M., Sugimori, O. et al. Tailor-made tricalcium phosphate bone implant directly fabricated by a three-dimensional ink-jet printer. J Artif Organs 9, 234–240 (2006). https://doi.org/10.1007/s10047-006-0347-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10047-006-0347-y