Abstract
The ionic conductivity and the mechanical strength are two key factors for the performance of poly(ethylene oxide) (PEO) based polyelectrolytes. However, crystallized PEO suppresses ion conductivity at low temperature and melted PEO has low mechanical strength at high temperature. Here, random binary brush copolymer composed of PEO- and polystyrene (PS)-based side chains is synthesized. PEO crystallinity is suppressed by the introduction of PS brushes. Doping with lithium trifluoromethanesulfonate (LiTf) induces microphase separation. Due to a random arrangement of the brushes, the microphase segregation is incomplete even at high salt loading, which provides both high ionic conductivity and high mechanical strength at room temperature. These results provide opportunities for the design of polymeric electrolytes to be used at room temperature.
Similar content being viewed by others
References
Manuel, S. A. Review on gel polymer electrolytes for lithium batteries. Eur. Polym. J. 2006, 42(1), 21–42.
Tarascon, J. M.; Armand, M. Issues and challenges facing rechargeable lithium batteries. Nature 2001, 414(6861), 359–367.
Fenton, D. E.; Parker, J. M.; Wright, P. V. Complexes of alkali metal ions with poly(ethylene oxide). Polymer 1973, 14(11), 589-589.
Patel, S. N.; Javier, A. E.; Stone, G. M.; Mullin, S. A.; Balsara, N. P. Simultaneous conduction of electronic charge and lithium ions in block copolymers. ACS Nano 2012, 6(2), 1589–1600.
Yang, L. Y.; Wei, D. X.; Xu, M.; Yao, Y. F.; Chen, Q. Transferring lithium ions in nanochannels: a PEO/Li+ solid polymer electrolyte design. Angew. Chem. Int. Ed. 2014, 53(14), 3631–3635.
Vöge, A.; Deimede, V.; Paloukis, F.; Neophytides, S. G.; Kallitsis, J. K. Synthesis and properties of aromatic polyethers containing poly(ethylene oxide) side chains as polymer electrolytes for lithium ion batteries. Mater. Chem. Phys. 2014, 148(1-2), 57–66.
Sinha, K.; Maranas, J. Does ion aggregation impact polymer dynamics and conductivity in PEO-based single ion conductors? Macromolecules 2014, 47(8), 2718–2726.
Gao, S.; Zhong, J.; Xue, G.; Wang, B. Ion conductivity improved polyethylene oxide/lithium perchlorate electrolyte membranes modified by graphene oxide. J. Membr. Sci. 2014, 470, 316–322.
Sun, J.; Stone, G. M.; Balsara, N. P.; Zuckermann, R. N. Structure-conductivity relationship for peptoid-based PEOmimetic polymer electrolytes. Macromolecules 2012, 45(12), 5151–5156.
Christie, A. M.; Lilley, S. J.; Staunton, E.; Andreev, Y. G.; Bruce, P. G. Increasing the conductivity of crystalline polymer electrolytes. Nature 2005, 433(7021), 50–53.
Xiao, Q.; Wang, X.; Li, W.; Li, Z.; Zhang, T.; Zhang, H. Macroporous polymer electrolytes based on PVDF/PEO-b-PMMA block copolymer blends for rechargeable lithium ion battery. J. Membr. Sci. 2009, 334(1-2), 117–122.
Song, J. J.; Wang, Y. Y.; Wan, C. C. Review of gel-type polymer electrolytes for lithium ion batteries. J. Power Sources 1999, 77(2), 183–197.
Fontenella, J. J.; Wintergill, M. C.; Calame, J. P.; Andeen, C. G. Electrical relaxation in pure and alkali metal thiocynate complexed with poly(ethylene oxide). Solid State Ionics 1983, 8(4), 333–339.
Chen, H. W.; Chang, F. C. The novel polymer electrolyte nanocomposite composed of poly(ethylene oxide), lithium triflate and mineral clay. Polymer 2001, 42(24), 9763–9769.
Panday, A.; Mullin, S.; Gomez, E. D.; Wanakule, N.; Chen, V. L.; Hexemer, A.; Pople, J.; Balsara, N. P. Effect of molecular weight and salt concentration on conductivity of block copolymer electrolytes. Macromolecules 2009, 42(13), 4632–4637
Singh, M.; Odusanya, O.; Wilmes, G. M.; Eitouni, H. B.; Gomez, E. D.; Patel, A. J.; Chen, V. L.; Park, M. J.; Fragouli, P.; Iatrou, H.; Hadjichristidis, N.; Cookson, D.; Balsara, N. P. Effect of molecular weight on the mechanical and electrical properties of block copolymer electrolytes. Macromolecules 2007, 40(13), 4578–4585.
Stone, G. M.; Mullin, S. A.; Teran, A. A.; Hallinan, D. T.; Minor, A. M.; Hexemer, A.; Balsara, N. P. Resolution of the modulus versus adhesion dilemma in solid polymer electrolytes for rechargeable lithium metal batteries. J. Electrochem. Soc. 2012, 159(3), A222–A227.
Choi, S.; Cho, B. K. Liquid crystalline and ion-conducting properties of mesogenic dendron-coil-dendron copolymers: characterization of LC phases using normalized conductivity. Soft Matter 2013, 9(16), 4241–4248.
Inceoglu, S.; Rojas, A. A.; Devaux, D.; Chen, X. C.; Stone, G. M.; Balsara, N. P. Morphology-conductivity relationship of singleion-conducting block copolymer electrolytes for lithium batteries. ACS Macro Lett. 2014, 3(6), 510–514.
Shi, J.; Vincent, C. A. The effect of molecular weight on cation mobility in polymer electrolytes. Solid State Ionics 1993, 60(1-3), 11–17.
Money, B. K.; Hariharan, K.; Swenson, J. Glass transition and relaxation processes of nanocomposite polymer electrolytes. J. Phys. Chem. B 2012, 116(26), 7762–7770.
Xia, Y.; Olsen, B. D.; Kornfield, J. A.; Grubbs, R. H. Efficient synthesis of narrowly dispersed brush copolymers and study of their assemblies: the importance of side chain arrangement. J. Am. Chem. Soc. 2009, 131(51), 18525–18532.
Ruzette, A. V. G.; Soo, P. P.; Sadoway, D. R.; Mayes, A. M. Melt-formable block copolymer electrolytes for lithium rechargeable batteries. J. Electrochem. Soc. 2001, 148(6), A537–A543.
Gao, L. C.; Zhang, C. L.; Liu, X.; Fan, X. H.; Wu, Y. X.; Chen, X. F.; Shen, Z.; Zhou, Q. F. ABA type liquid crystalline triblock copolymers by combination of living cationic polymerizaition and ATRP: synthesis and self-assembly. Soft Matter 2008, 4(6), 1230–1236.
Xue, B.; Gao, L.; Jiang, H.; Geng, Z.; Guan, S.; Wang, Y.; Liu, Z.; Jiang, L. High flux CO2 transporting nanochannel fabricated by self-assembly of linear-brush block copolymer. J. Mater. Chem. A 2013, 1(28), 8097–8100.
Chung, G.; Kornfield, J.; Smith, S. Component dynamics miscible polymer blends: a two-dimensional deuteron NMR investigation. Macromolecules 1994, 27(4), 964–973.
Chung, G. C.; Kornfield, J.; Smith, S. Compositional dependence of segmental dynamics in a miscible polymer blend. Macromolecules 1994, 27(20), 5729–5741.
Lodge, T. P.; McLeish, T. C. Self-concentrations and effective glass transition temperatures in polymer blends. Macromolecules 2000, 33(14), 5278–5284.
Kumar, S. K.; Colby, R. H.; Anastasiadis, S. H.; Fytas, G. Concentration fluctuation induced dynamic heterogeneities in polymer blends. J. Chem. Phys. 1996, 105(9), 3777–3788.
Nakamura, I.; Balsara, N. P.; Wang, Z. G. First-order disordered-to-lamellar phase transition in lithium salt-doped block copolymers. ACS Macro Lett. 2013, 2(6), 478–481.
Nakamura, I.; Balsara, N.; Wang, Z. G. Thermodynamics of ion-containing polymer blends and block copolymers. Phys. Rev. Lett. 2011, 107(19), 198301.
Nakamura, I.; Wang, Z. G. Salt-doped block copolymers: ion distribution, domain spacing and effective ? parameter. Soft Matter 2012, 8(36), 9356–9367.
Ren, C. L.; Nakamura, I.; Wang, Z. G. Effects of ion-induced cross-linking on the phase behavior in salt-doped polymer blends. Macromolecules 2016, 49(1), 425–431.
Vachon, C.; Labreche, C.; Vallee, A.; Besner, S.; Dumont, M.; Prud’Homme, J. Microphase separation and conductivity behavior of poly(propylene oxide)-lithium salt electrolytes. Macromolecules 1995, 28(16), 5585–5594.
Lemai, F.; Prud’homme, J. Ion-ion, short-range interactions in PEO-LiX rubbery electrolytes containing LiSCN, LiN(CF3SO2)2 or Li[CF3SO2N(CH2)3OCH3] as deduced from studies performed on PEO-LiX-KX ternary systems. Electrochim. Acta 2001, 46(9), 1359–1367.
Fetters, L.; Lohse, D.; Colby, R. in "Physical Properties of Polymers Handbook", Springer, 2007, p. 447–454.
Staunton, E.; Christie, A. M.; Martin-Litas, I.; Andreev, Y. G.; Slawin, A. M.; Bruce, P. G. Structure of the poly (ethylene oxide)-zinc chloride complex. Angew. Chem. Int. Ed. 2004, 116(16), 2155–2157.
Matsumiya, Y.; Balsara, N. P.; Kerr, J. B.; Inoue, T.; Watanabe, H. In situ dielectric characterization of poly(ethylene oxide) melts containing lithium perchlorate under steady shear flow. Macromolecules 2004, 37(2), 544–553.
Goldansaz, H.; Auhl, D.; Goderis, B.; Voleppe, Q.; Fustin, C. A.; Gohy, J. F.; Bailly, C.; van Ruymbeke, E. Transient metallosupramolecular networks built from entangled melts of poly(ethylene oxide). Macromolecules 2015, 48(11), 3746–3755.
Winter, H. Can the gel point of a cross-linking polymer be detected by the G′-G″ crossover? Polym. Eng. Sci. 1987, 27(22), 1698–1702.
Zardalidis, G.; Ioannou, E.; Pispas, S.; Floudas, G. Relating structure, viscoelasticity, and local mobility to conductivity in PEO/LiTf electrolytes. Macromolecules 2013, 46(7), 2705–2714.
Acknowledgments
L.C.G. is grateful for financial support from the National Key Research and Development Program of China (2017YFA0206904, 2017YFA0206900). Q.C. is grateful for start-up fund of Changchun Institute of Applied Chemistry, Chinese Academy of Sciences. We thank Dr Ralph Colby at Penn. State Univ. for helpful comments.
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Lyu, YF., Zhang, ZJ., Liu, C. et al. Random binary brush architecture enhances both ionic conductivity and mechanical strength at room temperature. Chin J Polym Sci 36, 78–84 (2018). https://doi.org/10.1007/s10118-018-2016-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-018-2016-z