Abstract
In this study we introduce linear poly(glycidol) (PG), a structural analog of poly(ethylene glycol) bearing side chains at each repeating unit, as polymer basis for bioink development. We prepare allyl- and thiol-functional linear PG that can rapidly be polymerized to a three-dimensionally cross-linked hydrogel network via UV mediated thiol-ene click reaction. Influence of polymer concentration and UV irradiation on mechanical properties and swelling behavior was examined. Thiol-functional PG was synthesized in two structural variations, one containing ester groups that are susceptible to hydrolytic cleavage, and the other one ester-free and stable against hydrolysis. This allowed the preparation of degradable and non-degradable hydrogels. Cytocompatibility of the hydrogel was demonstrated by encapsulation of human bone marrow-derived mesenchymal stem cells (hBMSCs). Rheological properties of the hydrogels were adjusted for dispense plotting by addition of high molecular weight hyaluronic acid. The optimized formulation enabled highly reproducible plotting of constructs composed of 20 layers with an overall height of 3.90 mm.
Similar content being viewed by others
References
Akhtar, R., M. J. Sherratt, J. K. Cruickshank, and B. Derby. Characterizing the elastic properties of tissues. Mater. Today 14:96–105, 2011.
Allison, D. D., and K. J. Grande-Allen. Review. Hyaluronan: a powerful tissue engineering tool. Tissue Eng. 12:2131–2140, 2006.
Billiet, T., M. Vandenhaute, J. Schelfhout, S. Van Vlierberghe, and P. Dubruel. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 33:6020–6041, 2012.
Bryant, S. J., T. T. Chowdhury, D. A. Lee, D. L. Bader, and K. S. Anseth. Crosslinking density influences chondrocyte metabolism in dynamically loaded photocrosslinked poly(ethylene glycol) hydrogels. Ann. Biomed. Eng. 32:407–417, 2004.
Derby, B. Printing and prototyping of tissues and scaffolds. Science 338:921–926, 2012.
Dworak, A., S. Slomkowski, T. Basinska, M. Gosecka, W. Walach, and B. Trzebicka. Polyglycidol—how is it synthesized and what is it used for? Polimery 58:641–649, 2013.
Erberich, M., H. Keul, and M. Moeller. Polyglycidols with two orthogonal protective groups: preparation, selective deprotection, and functionalization. Macromolecules 40:3070–3079, 2007.
Fitton, A. O., J. Hill, D. E. Jane, and R. Millar. Synthesis of simple oxetanes carrying reactive 2-substituents. Synthesis 1140–1142:1987, 1987.
Gramlich, W. M., I. L. Kim, and J. A. Burdick. Synthesis and orthogonal photopatterning of hyaluronic acid hydrogels with thiol-norbornene chemistry. Biomaterials 34:9803–9811, 2013.
Groll, J., T. Boland, T. Blunk, J. A. Burdick, D. W. Cho, P. D. Dalton, B. Derby, G. Forgacs, Q. Li, V. A. Mironov, L. Moroni, M. Nakamura, W. Shu, S. Takeuchi, G. Vozzi, T. B. F. Woodfield, T. Xu, J. J. Yoo, and J. Malda. Biofabrication: reappraising the definition of an evolving field. Biofabrication 8:013001, 2016.
Groll, J., S. Singh, K. Albrecht, and M. Moeller. Biocompatible and degradable nanogels via oxidation reactions of synthetic thiomers in inverse miniemulsion. J. Polym. Sci. A Polym. Chem. 47:5543–5549, 2009.
Imran ul-haq, M., B. F. L. Lai, R. Chapanian, and J. N. Kizhakkedathu. Influence of architecture of high molecular weight linear and branched polyglycerols on their biocompatibility and biodistribution. Biomaterials 33:9135–9147, 2012.
Jungst, T., W. Smolan, K. Schacht, T. Scheibel, and J. Groll. Strategies and molecular design criteria for 3D printable hydrogels. Chem. Rev. 2016. doi:10.1021/acs.chemrev.5b00303.
Kainthan, R. K., J. Janzen, E. Levin, D. V. Devine, and D. E. Brooks. Biocompatibility testing of branched and linear polyglycidol. Biomacromolecules 7:703–709, 2006.
Klein, T. J., S. C. Rizzi, J. C. Reichert, N. Georgi, J. Malda, W. Schuurman, R. W. Crawford, and D. W. Hutmacher. Strategies for zonal cartilage repair using hydrogels. Macromol. Biosci. 9:1049–1058, 2009.
Kuhlmann, M., and J. Groll. Dispersity control of linear poly(glycidyl ether)s by slow monomer addition. RSC Adv. 5:67323–67326, 2015.
Levett, P. A., D. W. Hutmacher, J. Malda, and T. J. Klein. Hyaluronic acid enhances the mechanical properties of tissue-engineered cartilage constructs. PLoS One 9:e113216, 2014.
Malda, J., J. Visser, F. P. Melchels, T. Jüngst, W. E. Hennink, W. J. A. Dhert, J. Groll, and D. W. Hutmacher. 25th Anniversary article: engineering hydrogels for biofabrication. Adv. Mater. 25:5011–5028, 2013.
Melchels, F. P. W., M. A. N. Domingos, T. J. Klein, J. Malda, P. J. Bartolo, and D. W. Hutmacher. Additive manufacturing of tissues and organs. Prog. Polym. Sci. 37:1079–1104, 2012.
Murphy, S. V., and A. Atala. 3D bioprinting of tissues and organs. Nat. Biotech. 32:773–785, 2014.
Nichol, J. W., S. T. Koshy, H. Bae, C. M. Hwang, S. Yamanlar, and A. Khademhosseini. Cell-laden microengineered gelatin methacrylate hydrogels. Biomaterials 31:5536–5544, 2010.
Owen, S. C., S. A. Fisher, R. Y. Tam, C. M. Nimmo, and M. S. Shoichet. Hyaluronic acid click hydrogels emulate the extracellular matrix. Langmuir 29:7393–7400, 2013.
Pereira, R. F., and P. J. Bártolo. 3D Photo-fabrication for tissue engineering and drug delivery. Engineering 1:90–112, 2015.
Pereira, R. F., and P. J. Bártolo. 3D bioprinting of photocrosslinkable hydrogel constructs. J. Appl. Polym. Sci. 132:42458, 2015.
Pescosolido, L., W. Schuurman, J. Malda, P. Matricardi, F. Alhaique, T. Coviello, P. R. van Weeren, W. J. A. Dhert, W. E. Hennink, and T. Vermonden. Hyaluronic acid and dextran-based semi-IPN hydrogels as biomaterials for bioprinting. Biomacromolecules 12:1831–1838, 2011.
Robert, J. J., and S. J. Bryant. Comparison of photopolymerizable thiol-ene PEG and acrylate-based PEG hydrogels for cartilage development. Biomaterials 34:9969–9979, 2013.
Schacht, K., T. Jungst, M. Schweinlin, A. Ewald, J. Groll, and T. Scheibel. Biofabrication of cell-loaded 3D spider silk constructs. Angew. Chem. Int. Ed. 54:1–6, 2015.
Schindelin, J., I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D. J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona. Fiji: an open-source platform for biological-image analysis. Nat. Methods 7:676–682, 2012.
Schuurman, W., P. A. Levett, M. W. Pot, P. R. van Weeren, W. J. A. Dhert, D. W. Hutmacher, F. P. W. Melchels, T. J. Klein, and J. Malda. Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. Macromol. Biosci. 13:551–561, 2013.
Singh, S., F. Topuz, K. Hahn, K. Albrecht, and J. Groll. Embedding of active proteins and living cells in redox-sensitive hydrogels and nanogels through enzymatic cross-linking. Angew. Chem. Int. Ed. 52:3000–3003, 2013.
Skardal, A., J. Zhang, L. McCoard, X. Xu, S. Oottamasathien, and G. D. Prestwich. Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting. Tissue Eng. A 16:2675–2685, 2010.
Thomas, A., S. S. Müller, and H. Frey. Beyond Poly(ethylene glycol): linear polyglycerol as a multifunctional polyether for biomedical and pharmaceutical applications. Biomacromolecules 15:1935–1954, 2014.
Toepke, M. W., N. A. Impellitteri, J. M. Theisen, and W. L. Murphy. Characterization of thiol-ene crosslinked PEG hydrogels. Macromol. Mater. Eng. 29:699–703, 2013.
Acknowledgment
The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007–2013) under Grant Agreement n° 309962 (Project HydroZONES) and from the Interdisciplinary Center for Clinical Research Würzburg (Project Number D-219).
Author information
Authors and Affiliations
Corresponding author
Additional information
Associate Editor Jos Malda oversaw the review of this article.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Supplementary material 2 (MP4 11037 kb)
Supplementary material 3 (MP4 12577 kb)
Rights and permissions
About this article
Cite this article
Stichler, S., Jungst, T., Schamel, M. et al. Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication. Ann Biomed Eng 45, 273–285 (2017). https://doi.org/10.1007/s10439-016-1633-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10439-016-1633-3