Skip to main content
Log in

Integral Material Studies of Nuclear Fuel at Institute of Reactor Materials

  • Published:
Atomic Energy Aims and scope

Survey information on integral material studies of advanced fuel compositions performed at the Institute of Reactor Materials over a period of 50 years is presented. The influence of the reactor testing conditions on the radiation resistance of different forms of nuclear fuel was investigated: oxide, carbide, nitride, carbosulfide, and some of their compounds. Uranium oxides possessed a different initial microstructure and were doped with the oxides Y2O3, TiO2, Sc2O3, and others. Carbide fuel was tested in the form of solid solutions of uranium carbide with Zr, Nb, and Ta carbides. The dimensional, phase, and structural stability of fuel compositions were studied in hot boxes; the electrophysical and mechanical properties, such as strength in compression and bending, Young’s modulus, the shear modulus, and Poisson’s ratio were investigated. The experimental data on the radiation resistance of advanced fuel compositions formed the basis for the validation of the serviceability of different nuclear reactors.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Yu. G. Dragunov, “The development of a megawatt class reactor for a propulsion and power module,” in: NIKIET Ann. Report (2013), pp. 18–20.

  2. S. V. Alekseev, V. I. Vybyvanets, A. S. Gontar’, et al., “Advanced fuel materials for thermionic nuclear power facility,” At. Energ., 115, No. 6, 322–331 (2013).

    Google Scholar 

  3. M. V. Tchernetsov, V. S. Gutnik, A. S. Gontar’, et al., “Investigation of the radiation behavior of carbide and carbon sulfide fuel at high temperatures,” in: Abstr. 4th Conf. on Reactor in Materials Management, NIIAR, Dimitrovgrad (1995), p. 65.

  4. M. V. Tchernetsov and G. A. Sernyaev, “Radiation swelling and sintering of carbide fuel compositions,” in: 4th Conf. on Reactor in Materials Management: Collection, NIIAR, Dimitrovgrad (1996), Vol. 1, pp. 317–327.

  5. M. V. Tchernetsov, S. A. Averin, V. I. Tokarev, et al., “Results of high-temperature reactor materials research and testing of fuel elements and structural materials for NPPP conditions,” in: Abst. 5th Conf. on Reactor Material Management, NIIAR, Dimitrovgrad (1997), p. 52.

  6. L. P. Sinel’nikov, S. A. Averin, A. V. Kozlov, et al., “Equipment and methods of post-reactor studies of materials in a block of shielded enclosures at institute of reactor materials,” this issue, pp. 240–248.

Download references

Author information

Authors and Affiliations

Authors

Additional information

Translated from Atomnaya Energiya, Vol. 121, No. 4, pp. 199–201, October, 2016.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chernetsov, M.V. Integral Material Studies of Nuclear Fuel at Institute of Reactor Materials. At Energy 121, 255–258 (2017). https://doi.org/10.1007/s10512-017-0193-4

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10512-017-0193-4

Navigation