Abstract
This article reports a single-step “green protocol” for the environmentally friendly synthesis of zerovalent iron (ZVI) nanoparticles supported on cellulose nanocrystals (CNCs) fabricated from bamboo pulp. The high content of available hydroxyl groups on the CNC surfaces is utilized as an anchor point for the simultaneous reduction and stabilization of the CNC-supported ZVIs. In this approach, Na-CNCs act as corrosion inhibitors and enhance the catalytic activity of ZVI as it retains a zero state even after 5 days of exposure to air. Furthermore, CNC-supported ZVIs are found with narrow size distribution along with improved dispersion stability in water. The CNC-supported ZVIs successfully degraded the methylene blue, making it a potentially active and nontoxic biocatalyst for wastewater remediation. Moreover, it was also found to be active toward the hydrogenation of 4-nitrophenol into 4-aminophenol. Furthermore, we observed the autonomous motion of CNC-supported ZVIs in the presence of peroxide fuel whose trajectories were found to be externally controlled under both magnetic fields and pH gradients. Interestingly, we can remotely tune the speed and controlled trajectory of CNC-supported ZVIs, making these motors a potential candidate for the next-generation nanomachines for sensors, imaging and drug delivery applications.
Similar content being viewed by others
References
Agarwal UP, Sabo R, Reiner RS, Clemons CM, Rudie AW (2012) Spatially resolved characterization of cellulose nanocrystal-polypropylene composite by confocal Raman microscopy. Appl Spectrosc 66:750–756
Benaissi K, Johnson L, Walsh DA, Thielemans W (2010) Synthesis of platinum nanoparticles using cellulosic reducing agents. Green Chem 12:220–222
Bhardwaj U, Dhar P, Kumar A, Katiyar V (2014) Polyhydroxyalkanoates (PHA)-cellulose based nanobiocomposites for food packaging applications. In: Food additives and packaging 275–314. ACS symposium series, 1162. American Chemical Society
Cao X, Habibi Y, Lucia LA (2009) One-pot polymerization, surface grafting, and processing of waterborne polyurethane-cellulose nanocrystal nanocomposites. J Mater Chem 19:7137–7145
Castro CS, Guerreiro MC, Oliveira LCA, Gonçalves M, Anastacio AS, Nazzarro M (2009) Iron oxide dispersed over activated carbon: support influence on the oxidation of the model molecule methylene blue. Appl Catal A 367:53–58
Ceraulo L, Fanara S, Ruggirello A, Liveri VT (2007) FT-IR investigation of the state of iron (III) chloride clusters confined in AOT reverse micelles dispersed in carbon tetrachloride. J Cluster Sci 18:883–895
Cirtiu CM, Dunlop-Brière AF, Moores A (2011) Cellulose nanocrystallites as an efficient support for nanoparticles of palladium: application for catalytic hydrogenation and Heck coupling under mild conditions. Green Chem 13:288–291
Dhar P, Bhardwaj U, Katiyar V (2014a) Polymers for packaging applications. CRC Press, Boca Raton
Dhar P, Bhardwaj U, Kumar A, and Katiyar V (2014) Cellulose nanocrystals: a potential nanofiller for food packaging applications. In: Food additives and packaging. 197–239. ACS symposium series, 1162. American Chemical Society
Dhar P, Bhardwaj U, Kumar A, Katiyar V (2015a) Poly (3‐hydroxybutyrate)/cellulose nanocrystal films for food packaging applications: barrier and migration studies. Polym Eng Sci. doi:10.1002/pen.24127
Dhar P, Tarafder D, Kumar A, Katiyar V (2015b) Effect of cellulose nanocrystal polymorphs on mechanical, barrier and thermal properties of poly (lactic acid) based bionanocomposites. RSC Adv 5:60426–60440
Dong H, Snyder JF, Tran DT, Leadore JL (2013a) Hydrogel, aerogel and film of cellulose nanofibrils functionalized with silver nanoparticles. Carbohydr Polym 95:760–767
Dong H, Snyder JF, Williams KS, Andzelm JW (2013b) Cation-induced hydrogels of cellulose nanofibrils with tunable moduli. Biomacromolecules 14:3338–3345
Farrell D, Majetich SA, Wilcoxon JP (2003) Preparation and characterization of monodisperse Fe nanoparticles. J Phys Chem B 107:11022–11030
Frost RL, Xi Y, He H (2010) Synthesis, characterization of palygorskite supported zero-valent iron and its application for methylene blue adsorption. J Colloid Interface Sci 341(1):153–161
Garner A (2014) Use of cellulose nanocrystals as a corrosion inhibitor. U.S. Patent Application 13/935,477
Horzum N, Demir MM, Nairat M, Shahwan T (2013) Chitosan fiber-supported zero-valent iron nanoparticles as a novel sorbent for sequestration of inorganic arsenic. RSC Adv 3:7828–7837
Houas A, Lachheb H, Ksibi M, Elaloui E, Guillard C, Herrmann JM (2001) Photocatalytic degradation pathway of methylene blue in water. Appl Catal B 31:145–157
Huang KC, Ehrman SH (2007) Synthesis of iron nanoparticles via chemical reduction with palladium ion seeds. Langmuir 23:1419–1426
Jackson JK, Letchford K, Wasserman BZ, Ye L, Hamad WY, Burt HM (2011) The use of nanocrystalline cellulose for the binding and controlled release of drugs. Int J Nanomed 6:321
Jiang F, Hsieh YL (2014) Synthesis of cellulose nanofibril bound silver nanoprism for surface enhanced Raman Scattering. Biomacromolecules 15:3608–3616
Johnson L, Thielemans W, Walsh DA (2011) Synthesis of carbon-supported Pt nanoparticle electrocatalysts using nanocrystalline cellulose as reducing agent. Green Chem 13:1686–1693
Klačanová K, Fodran P, Šimon P, Rapta P, Boča R, Jorík V, Miglierini M, Kolek E, Čaplovič L (2012) Formation of Fe(0)-nanoparticles via reduction of Fe(II) compounds by amino acids and their subsequent oxidation to iron oxides. J Chem 2013
Lai B, Chen Z, Zhou Y, Yang P, Wang J, Chen Z (2013) Removal of high concentration p-nitrophenol in aqueous solution by zero valent iron with ultrasonic irradiation (US–ZVI). J Hazard Mater 250:220–228
Lai B, Zhang Y, Chen Z, Yang P, Zhou Y, Wang J (2014) Removal of p-nitrophenol (PNP) in aqueous solution by the micron-scale iron–copper (Fe/Cu) bimetallic particles. Appl Catal B 144:816–830
Lam E, Male KB, Chong JH, Leung AC, Luong JH (2012) Applications of functionalized and nanoparticle-modified nanocrystalline cellulose. Trends Biotechnol 30:283–290
Le Troedec M, Sedan D, Peyratout C, Bonnet JP, Smith A, Guinebretiere R, Gloaguen V, Krausz P (2008) Influence of various chemical treatments on the composition and structure of hemp fibres. Compos A Appl Sci Manuf 39:514–522
Li J, Xiao Q, Jiang JZ, Chen GN, Sun JJ (2014) Au–Fe/Ni alloy hybrid nanowire motors with dramatic speed. RSC Adv 4:27522–27525
Liang W, Dai C, Zhou X, Zhang Y (2014) Application of zero-valent iron nanoparticles for the removal of aqueous zinc ions under various experimental conditions. PLoS ONE 9:e85686
Liu A, Liu J, Pan B, Zhang WX (2014) Formation of lepidocrocite (γ-FeOOH) from oxidation of nanoscale zero-valent iron (nZVI) in oxygenated water. RSC Adv 4:57377–57382
Nadagouda MN, Castle AB, Murdock RC, Hussain SM, Varma RS (2010) In vitro biocompatibility of nanoscale zerovalent iron particles (NZVI) synthesized using tea polyphenols. Green Chem 12:114–122
Njagi EC, Huang H, Stafford L, Genuino H, Galindo HM, Collins JB, Hoag GE, Suib SL (2010) Biosynthesis of iron and silver nanoparticles at room temperature using aqueous sorghum bran extracts. Langmuir 27:264–271
Oh SY, Yoo DI, Shin Y, Kim HC, Kim HY, Chung YS, Park WH, Youk JH (2005) Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy. Carbohydr Res 340:2376–2391
Park S, Baker JO, Himmel ME, Parilla PA, Johnson DK (2010) Research cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance. Biotechnol Biofuels 3:10
Park M, Chang H, Jeong DH, Hyun J (2013) Spatial deformation of nanocellulose hydrogel enhances SERS. BioChip J 7:234–241
Pulgarin C, Kiwi J (1995) Iron oxide-mediated degradation, photodegradation, and biodegradation of aminophenols. Langmuir 11:519–526
Rezayat M, Blundell RK, Camp JE, Walsh DA, Thielemans W (2014) Green one-step synthesis of catalytically active palladium nanoparticles supported on cellulose nanocrystals. ACS Sustain Chem Eng 2:1241–1250
Sadasivuni KK, Kafy A, Zhai L, Ko HU, Mun S, Kim J (2014) Transparent and flexible cellulose nanocrystal/reduced graphene oxide film for proximity sensing. Small 11:994–1002
Schmidt J, Marcovitch O, Lubezky A, Kozirovski Y, Folman M (1980) IR and FIR spectra of ammonia adsorbed on calcium chloride and bromide: evidence for complex formation. J Colloid Interface Sci 75:85–94
Shin Y, Exarhos GJ (2007) Template synthesis of porous titania using cellulose nanocrystals. Mater Lett 61:2594–2597
Shin Y, Bae IT, Arey BW, Exarhos GJ (2007a) Simple preparation and stabilization of nickel nanocrystals on cellulose nanocrystal. Mater Lett 61:3215–3217
Shin Y, Blackwood JM, Bae IT, Arey BW, Exarhos GJ (2007b) Synthesis and stabilization of selenium nanoparticles on cellulose nanocrystal. Mater Lett 61:4297–4300
Shin Y, Bae IT, Arey BW, Exarhos GJ (2008) Facile stabilization of gold-silver alloy nanoparticles on cellulose nanocrystal. J Phys Chem C 112:4844–4848
Singh AK, Dey KK, Chattopadhyay A, Mandal TK, Bandyopadhyay D (2014) Multimodal chemo–magnetic control of self-propelling microbots. Nanoscale 6:1398–1405
Socrates G (2004) Infrared and Raman characteristic group frequencies: tables and charts. Wiley, New York
Sun YP, Li XQ, Zhang WX, Wang HP (2007) A method for the preparation of stable dispersion of zero-valent iron nanoparticles. Colloids Surf A 308:60–66
Tian C, Fu S, Lucia LA (2015) Magnetic Cu0.5Co0.5Fe2O4 ferrite nanoparticles immobilized in situ on the surfaces of cellulose nanocrystals. Cellulose 22(4):2571–2587. doi:10.1007/s10570-015-0658-3
Tseng HH, Su JG, Liang C (2011) Synthesis of granular activated carbon/zero valent iron composites for simultaneous adsorption/dechlorination of trichloroethylene. J Hazard Mater 192:500–506
Turcheniuk K, Tarasevych AV, Kukhar VP, Boukherroub R, Szunerits S (2013) Recent advances in surface chemistry strategies for the fabrication of functional iron oxide based magnetic nanoparticles. Nanoscale 5:10729–10752
Valle-Orta M, Diaz D, Santiago-Jacinto P, Vázquez-Olmos A, Reguera E (2008) Instantaneous synthesis of stable zerovalent metal nanoparticles under standard reaction conditions. J Phys Chem B 112:14427–14434
Wei H, Rodriguez K, Renneckar S, Vikesland PJ (2014) Environmental science and engineering applications of nanocellulose-based nanocomposites. Environ Sci Nano 1:302–316
Williams KS, Andzelm JW, Dong H, Snyder JF (2014) DFT study of metal cation-induced hydrogelation of cellulose nanofibrils. Cellulose 21:1091–1101
Wu X, Lu C, Zhou Z, Yuan G, Xiong R, Zhang X (2014) Green synthesis and formation mechanism of cellulose nanocrystal-supported gold nanoparticles with enhanced catalytic performance. Environ Sci Nano 1:71–79
Yang G, Xie J, Deng Y, Bian Y, Hong F (2012) Hydrothermal synthesis of bacterial cellulose/AgNPs composite: a “green” route for antibacterial application. Carbohydr Polym 87:2482–2487
Zhang WX (2003) Nanoscale iron particles for environmental remediation: an overview. J Nanopart Res 5:323–332
Zhang S, Wang D, Quan X, Zhou L, Zhang X (2013) Multi-walled carbon nanotubes immobilized on zero-valent iron plates (Fe0-CNTs) for catalytic ozonation of methylene blue as model compound in a bubbling reactor. Sep Purif Technol 116:351–359
Zhou Y, Ding EY, Li WD (2007) Synthesis of TiO2 nanocubes induced by cellulose nanocrystal (CNC) at low temperature. Mater Lett 61:5050–5052
Acknowledgments
Authors would like to thank the Department of Chemicals and Petrochemicals (DCPC), Government of India-funded Centre of Excellence for Sustainable Polymers (CoE-SusPol) and Central Instruments Facilities at IIT Guwahati for providing the research facilities. The authors are also thankful to the Department of Biotechnology, Ministry of Science and Technology, India, for the research grant (BT/345/NE/TBP/2012). Authors are also thankfull to Hindustan Paper Corp. Ltd. (HPCL, Assam, India) for providing cellulose pulp for current investigation.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Author contribution
The authors declare that they have no conflict of interest. The manuscript was written with contributions of all authors. All authors have approved the final version of the manuscript.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Supplementary material 2 (AVI 6349 kb)
Supplementary material 3 (AVI 24334 kb)
Supplementary material 4 (AVI 13460 kb)
Supplementary material 5 (AVI 12204 kb)
Rights and permissions
About this article
Cite this article
Dhar, P., Kumar, A. & Katiyar, V. Fabrication of cellulose nanocrystal supported stable Fe(0) nanoparticles: a sustainable catalyst for dye reduction, organic conversion and chemo-magnetic propulsion. Cellulose 22, 3755–3771 (2015). https://doi.org/10.1007/s10570-015-0759-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-015-0759-z