Skip to main content
Log in

Orientation splitting and its contribution to grain refinement during equal channel angular extrusion

  • Ultrafine-Grained Materials
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

The early stage mechanisms of grain refinement during ECAE of a single-phase aluminium alloy have been studied using the EBSD technique. It was found that, in addition to the formation of shear-plane cell bands and shear bands by “simple shear”, the development of deformation bands due to orientation splitting contributed significantly to the refinement of microstructure. “Regular” slab-like deformation bands and “irregular” transitional bands were observed after the first pass; both developed boundaries of high misorientations. In the second pass, moderate orientation splitting took place within the deformation bands, although new deformation bands were not detected. With increased strains, fine scale orientation splitting tended to occur in local bands, generating high densities of new high misorientation boundaries. The crystallographic features of the different types of orientation splitting are examined.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Segal VM (1995) Mater Sci Eng A 197:157. doi:https://doi.org/10.1016/0921-5093(95)09705-8

    Article  Google Scholar 

  2. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Prog Mater Sci 45:103. doi:https://doi.org/10.1016/S0079-6425(99)00007-9

    Article  CAS  Google Scholar 

  3. Wang J, Iwahashi Y, Horita Z, Furukawa M, Nemoto M, Valiev RZ, Langdon TG (1996) Acta Mater 44:2973. doi:https://doi.org/10.1016/1359-6454(95)00395-9

    Article  CAS  Google Scholar 

  4. Hansen N, Huang X, Hughes DA (2001) Mater Sci Eng A 386:3. doi:https://doi.org/10.1016/S0921-5093(01)01191-1

    Article  Google Scholar 

  5. Zhu YT, Lowe TC (2000) Mater Sci Eng A 291:46. doi:https://doi.org/10.1016/S0921-5093(00)00978-3

    Article  Google Scholar 

  6. Prangnell PB, Bowen JR, Apps PJ (2004) Mater Sci Eng A 375–377:178. doi:https://doi.org/10.1016/j.msea.2003.10.170

    Article  Google Scholar 

  7. Werenskiold JC, Roven HJ (2005) Mater Sci Eng A 410–411:174. doi:https://doi.org/10.1016/j.msea.2005.08.049

    Article  Google Scholar 

  8. Zhilyaev AP, Oh-ishi K, Raab GI, McNelley TR (2006) Mater Sci Eng A 441:245. doi:https://doi.org/10.1016/j.msea.2006.08.029

    Article  Google Scholar 

  9. Segal VM (1999) Mater Sci Eng A 271:322. doi:https://doi.org/10.1016/S0921-5093(99)00248-8

    Article  Google Scholar 

  10. Kuhlman-Wilsdorf D (1999) Acta Mater 47:1697. doi:https://doi.org/10.1016/S1359-6454(98)00413-3

    Article  Google Scholar 

  11. Hurley PJ, Humphreys FJ (2003) Acta Mater 51:1087. doi:https://doi.org/10.1016/S1359-6454(02)00513-X

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors would like to acknowledge the financial support of the University of Manchester EPSRC Light Alloys Portfolio Partnership (EP/D029201/1) for this project.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Y. Huang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Huang, Y., Prangnell, P.B. Orientation splitting and its contribution to grain refinement during equal channel angular extrusion. J Mater Sci 43, 7273–7279 (2008). https://doi.org/10.1007/s10853-008-2623-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-008-2623-0

Keywords

Navigation