Abstract
This study focuses on a novel technique to produce thermoplastic composites directly from bicomponent nonwovens without using any resins or binders. Conceptually, the structure of the bicomponent fibers making up these nonwovens already mimics the fiber–matrix structure of fiber reinforced composites. Using this approach, we successfully produced isotropic thermoplastic composites with polymer combinations of polyethylene terephthalate/polyethylene (PET/PE), polyamide-6/polyethylene (PA6/PE), polyamide-6/polypropylene (PA6/PP), and PP/PE. The effects of processing temperature, fiber volume fraction, and thickness of the preform on the formation and structure of the nonwoven composites were discussed. Processing temperatures of 130 and 165 °C for PE and PP matrices, respectively, resulted in intact composite structures with fewer defects, for fiber volume fraction values of up to 51%. Moreover, an insight into the changes on the fine structure of the bicomponent fibers after processing was provided to better explain the mechanics behind the process. It is hypothesized that the composite fabrication process can result in annealing and increases the degree of crystallinity and melting temperature of polymers by thickening lamellae and/or removing imperfections. One of the other outcomes of this study is to establish what combination of mechanical properties (tensile and impact) nonwoven composites can offer. Our results showed that compared to glass mat reinforced thermoplastic composites, these novel isotropic nonwoven composites offer high specific strength (97 MPa/g cm−3 for PA6/PE), very high strain to failure (152% for PP/PE), and superior impact strength (147 kJ/m2 for PA6/PP) which can be desirable in many critical applications.
Similar content being viewed by others
References
Gamstedt EK, Berglund LA (2003) In: Harris B (ed) Fatigue in composites: science and technology of the fatigue response of fibre-reinforced plastics. CRC Press, Boca Raton, FL
Shanks RA (2004) In: Baillie C (ed) Green composites: polymer composites and the environment. Woodhead Pub, Abington, Cambridge
Capiati NJ, Porter RS (1975) J Mater Sci 10:1671. doi:10.1007/BF00554928
He T, Porter RS (1988) J Appl Polym Sci 35:1945
Zhang JM, Reynolds CT, Peijs T (2009) Compos Part A: Appl Sci Manuf 40:1747
Hine PJ, Ward IM, Olley RH, Bassett DC (1993) J Mater Sci 28:316. doi:10.1007/BF00357801
Ward IM, Hine PJ (1997) Polym Eng Sci 37:1809
Ward IM, Hine PJ (2004) Polym 45:1413
Yan R, Hine P, Ward I, Olley R, Bassett D (1997) J Mater Sci 32:4821. doi:10.1023/A:1018647401619
Lacroix F, Werwer M, Schulte K (1998) Compos Part A: Appl Sci and Manuf 29:371
Lacroix F, Lu H-Q, Schulte K (1999) Compos Part A: Appl Sci and Manuf 30:369
Peijs T (2003) Mater Today 6:30
Alcock B, Cabrera NO, Barkoula N, Loos J, Peijs T (2006) Compos Part A: Appl Sci and Manuf 37:716
Zhang JM, Peijs T (2010) Compos Part A: Appl Sci and Manuf 41:964
Olley RH, Bassett DC, Hine PJ, Ward IM (1993) J Mater Sci 28:1107. doi:10.1007/BF00400899
Kabeel MA, Bassett DC, Olley RH, Hine PJ, Ward IM (1994) J Mater Sci 29:4694. doi:10.1007/BF00356511
Rasburn J, Hine PJ, Ward IM, Olley RH, Bassett DC, Kabeel MA (1995) J Mater Sci 30:615. doi:10.1007/BF00356319
Abo El-Maaty MI, Bassett DC, Olley RH, Hine PJ, Ward IM (1996) J Mater Sci 31:1157. doi:10.1007/BF00353094
Hine PJ, Ward IM, Jordan ND, Olley R, Bassett DC (2003) Polymer 44:1117
Jordan ND, Bassett DC, Olley RH, Hine PJ, Ward IM (2003) Polymer 44:1133
Hine PJ, Ward IM (2006) J Appl Polym Sci 101:991
Hine PJ, Ward IM, Maaty MIAE, Olley RH, Bassett DC (2000) J Mater Sci 35:5091. doi:10.1023/A:1004835816735
Jordan ND, Olley RH, Bassett DC, Hine PJ, Ward IM (2002) Polymer 43:3397
Hine PJ, Ward M, Teckoe J (1998) J Mater Sci 33:2725. doi:10.1023/A:1017540530295
Teckoe J, Olley RH, Bassett DC, Hine PJ, Ward IM (1999) J Mater Sci 34:2065. doi:10.1023/A:1004555608836
Amornsakchai T, Bassett DC, Olley RH, Hine PJ, Ward IM (2000) J Appl Polym Sci 78:787
Hine PJ, Olley RH, Ward IM (2008) Compos Sci Technol 68:1413
Reid RL (1998) Structural mechanics of textile composites: effect of braid construction and geometric parameters on composite performance. PhD dissertation, North Carolina State University, Raleigh, NC
Iroh JO (1999) In: Mark JE (ed) Polymer data handbook. Oxford University Press, New York
Fedorova N (2006) Investigation of the utility of islands-in-the-sea bicomponent fiber technology in the spunbond process. PhD dissertation, North Carolina State University, Raleigh, NC
Jirsâk O, Wadsworth LC (1999) Nonwoven textiles. Carolina Academic Press, Durham, NC
Bershteæin VA, Egorov VM (1994) Differential scanning calorimetry of polymers: physics, chemistry, analysis, technology. Ellis Horwood, New York
Barkoula N, Peijs T, Schimanski T, Loos J (2005) Polym Compos 26:114
Choi YB, Kim SY (1999) J Appl Polym Sci 74:2083
Wunderlich B (1973) Macromolecular physics. Academic Press, New York
Mehta A, Gaur U, Wunderlich B (1978) J Polym Sci: Polym Phys Ed 16:289
Clark EJ, Hoffman JD (1984) Macromolecules 17:878
Biron M (2007) Thermoplastics and thermoplastic composites: technical information for plastics users. Elsevier, Oxford
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dasdemir, M., Maze, B., Anantharamaiah, N. et al. Formation of novel thermoplastic composites using bicomponent nonwovens as a precursor. J Mater Sci 46, 3269–3281 (2011). https://doi.org/10.1007/s10853-010-5214-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-010-5214-9