Abstract
In this work, we explored the elaboration of new smart paper by coating fiber-based materials with CNC for possible use in packaging. Particularly, we investigated application of a 100% CNC layer onto a substrate. Mainly due to the cost and limited availability of CNC on a large scale, few studies have examined these opportunities. Several layers of CNC were deposited onto a paper material using the bar-coating process to improve relevant properties of the paper surface. Surface analyses (atomic force microscopy, scanning electron microscopy, and transmission electron microscopy) were performed to elucidate the CNC network at the paper surface. Structural and mechanical properties of the final materials were evaluated. Results of general interest were obtained about barrier properties. The air barrier and grease resistance improve only with the paper coated with CNC. To complete this research, a small amount of polyethylene glycol was added to reinforce the brittle CNC coating and clearly enhance barrier properties of the paper.
Similar content being viewed by others
References
Rånby BG, Ribi E (1950) Über den feinbau der zellulose. Experientia 6:12–14
Marchessault RH, Morehead FF, Walter NM (1959) Liquid crystal systems from fibrillar polysaccharides. Nature 184:632–633. doi:10.1038/184632a0
Eichhorn SJ, Dufresne A, Aranguren M et al (2010) Review: current international research into cellulose nanofibres and nanocomposites. J Mater Sci 45:1–33. doi:10.1007/s10853-009-3874-0
Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. doi:10.1021/cr900339w
Moon RJ, Martini A, Nairn J et al (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941. doi:10.1039/c0cs00108b
Yang X, Shi K, Zhitomirsky I, Cranston ED (2015) Cellulose nanocrystal aerogels as universal 3D lightweight substrates for supercapacitor materials. Adv Mater 27:6104–6109. doi:10.1002/adma.201502284
Dufresne A (2013) Nanocellulose: a new ageless bionanomaterial. Mater Today 16:220–227. doi:10.1016/j.mattod.2013.06.004
Klemm D, Kramer F, Moritz S et al (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–5466. doi:10.1002/anie.201001273
Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2:728–765. doi:10.3390/polym2040728
Domingues RMA, Gomes ME, Reis RL (2014) The potential of cellulose nanocrystals in tissue engineering strategies. Biomacromolecules 15:2327–2346. doi:10.1021/bm500524s
Lin N, Dufresne A (2014) Nanocellulose in biomedicine: current status and future prospect. Eur Polym J 59:302–325
Lin N, Gèze A, Wouessidjewe D et al (2016) Biocompatible double-membrane hydrogels from cationic cellulose nanocrystals and anionic alginate as complexing drugs codelivery. ACS Appl Mater Interfaces 8:6880–6889. doi:10.1021/acsami.6b00555
Charreau H, Foresti ML, Vazquez A (2013) Nanocellulose patents trends: a comprehensive review on patents on cellulose nanocrystals, microfibrillated and bacterial cellulose. Recent Pat Nanotechnol 7:56–80. doi:10.2174/187221013804484854
García A, Gandini A, Labidi J et al (2016) Industrial and crop wastes: a new source for nanocellulose biorefinery. Ind Crops Prod 93:26–38. doi:10.1016/j.indcrop.2016.06.004
Bras J, Viet D, Bruzzese C, Dufresne A (2011) Correlation between stiffness of sheets prepared from cellulose whiskers and nanoparticles dimensions. Carbohydr Polym 84:211–215
Herrera MA, Mathew AP, Oksman K (2014) Gas permeability and selectivity of cellulose nanocrystals films (layers) deposited by spin coating. Carbohydr Polym 112:494–501. doi:10.1016/j.carbpol.2014.06.036
Lee K-Y, Aitomäki Y, Berglund LA et al (2014) On the use of nanocellulose as reinforcement in polymer matrix composites. Compos Sci Technol 105:15–27
Mariano M, El Kissi N, Dufresne A (2014) Cellulose nanocrystals and related nanocomposites: review of some properties and challenges. J Polym Sci B 52:791–806. doi:10.1002/polb.23490
Brodin FW, Gregersen OW, Syverud K (2014) Cellulose nanofibrils: challenges and possibilities as a paper additive or coating material—A review. Nord Pulp Pap Res J 29:156–166
Bardet R, Bras J (2014) Cellulose nanofibers and their use in paper industry. In: Handbook ofgreen materials. Processing technologies, properties and applications, pp 207–232
Paralikar SA, Simonsen J, Lombardi J (2008) Poly(vinyl alcohol)/cellulose nanocrystal barrier membranes. J Membr Sci 320:248–258. doi:10.1016/j.memsci.2008.04.009
Roohani M, Habibi Y, Belgacem NM et al (2008) Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites. Eur Polym J 44:2489–2498. doi:10.1016/j.eurpolymj.2008.05.024
Siqueira G, Bras J, Dufresne A (2009) Cellulose whiskers versus microfibrils: influence of the nature of the nanoparticle and its surface functionalization on the thermal and mechanical properties of nanocomposites. Biomacromolecules 10:425–432. doi:10.1021/bm801193d
Aspler JS, Zou X, Laleg M et al (2015) Print quality on thin coatings of cellulose nanocrystals. FPINNOVATIONS, WO 2015168784 A1
Gicquel E, Martin C, Bras J (2016) Cellulose nanocrystals as new bio based coating layer for improving fiber-based barrier properties, presented at Tappi Nano conference in Grenoble, France
Gicquel E, Bras J, Martin C et al (2016) Stimuli responsive cellulose nanocrystals hydrogel for smart applications, presented at ACS conference, San Diego, USA
Mascheroni E, Rampazzo R, Ortenzi MA et al (2016) Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging materials. Cellulose 23:779–793. doi:10.1007/s10570-015-0853-2
Fujisawa S, Okita Y, Fukuzumi H et al (2011) Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups. Carbohydr Polym 84:579–583
Aulin C, Ström G (2013) Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance. Ind Eng Chem Res 52:2582–2589. doi:10.1021/ie301785a
Lavoine N, Bras J, Desloges I (2014) Mechanical and barrier properties of cardboard and 3D packaging coated with microfibrillated cellulose. J Appl Polym Sci 131:40106. doi:10.1002/app.40106
Rodionova G, Lenes M, Eriksen Ø, Gregersen Ø (2010) Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications. Cellulose 18:127–134. doi:10.1007/s10570-010-9474-y
Penttilä A, Sievänen J, Torvinen K et al (2013) Filler-nanocellulose substrate for printed electronics: experiments and model approach to structure and conductivity. Cellulose 20:1413–1424. doi:10.1007/s10570-013-9883-9
Li F, Biagioni P, Bollani M et al (2013) Multi-functional coating of cellulose nanocrystals for flexible packaging applications. Cellulose 20:2491–2504. doi:10.1007/s10570-013-0015-3
Bercea M, Navard P (2000) Shear dynamics of aqueous suspensions of cellulose whiskers. Macromolecules 33:6011–6016. doi:10.1021/ma000417p
Pignon F (2016) Structure and rheological behavior of CNC dispersions probed by local birefringence and in-situ Rheo-SAXS, presented at Tappi nano conference in Grenoble, France
Lavoine N, Desloges I, Khelifi B, Bras J (2014) Impact of different coating processes of microfibrillated cellulose on the mechanical and barrier properties of paper. J Mater Sci 49:2879–2893. doi:10.1007/s10853-013-7995-0
Hoeng F, Denneulin A, Bras J (2016) Use of nanocellulose in printed electronics: a review. Nanoscale 8:13131–13154. doi:10.1039/C6NR03054H
Aulin C, Gällstedt M, Lindström T (2010) Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 17:559–574. doi:10.1007/s10570-009-9393-y
Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—Its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764. doi:10.1016/j.carbpol.2012.05.026
McGonigle E-A, Liggat JJ, Pethrick RA et al (2004) Permeability of N2, Ar, He, O2, and CO2 through as-extruded amorphous and biaxially oriented polyester films: dependence on chain mobility. J Polym Sci B 42:2916–2929. doi:10.1002/polb.20141
Bardet R, Belgacem N, Bras J (2015) Flexibility and color monitoring of cellulose nanocrystal iridescent solid films using anionic or neutral polymers. ACS Appl Mater Interfaces 7:4010–4018. doi:10.1021/am506786t
Acknowledgements
This work has been partially supported by the PolyNat Carnot Institute (Investissements d’Avenir—Grant agreement n°ANR-11-CARN-007-01). This research has been possible, thanks to the facilities of the TekLiCell platform funded by the Région Rhône-Alpes (ERDF: European regional development fund). We would like to thank Berthine Khelifi (Grenoble Institute of Technology) for her expertise in providing SEM & FE-SEM imaging and Cécile Sillard (Grenoble Institute of Technology) for her expertise in AFM.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gicquel, E., Martin, C., Garrido Yanez, J. et al. Cellulose nanocrystals as new bio-based coating layer for improving fiber-based mechanical and barrier properties. J Mater Sci 52, 3048–3061 (2017). https://doi.org/10.1007/s10853-016-0589-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-016-0589-x