Oxide layers formed on AK6M2 aluminum-silicon alloy by microarc oxidizing (MO) are studied. The chemical and phase compositions and the morphology of the layers deposited from a base-composition electrolyte with different contents of added SiO2 powder are determined. It is shown that high-temperature phases form in the oxide layer at a specific concentration of SiO2 nanoparticles. This indicates elevation of the effective temperature in the zone of synthesis of the oxide layers in the process of MO. The addition of nanosize particles of SiO2 into the electrolyte influences positively the operating characteristics of the formed oxide layer.
Similar content being viewed by others
References
M. M. Krishtal and M. O. Ryumkin, “Effect of the initial structure of Al – Si alloys on the properties of oxide layers obtained by the method of microarc oxidizing and on deceleration of growth of the oxide layer by silicon particles,” Materialovedenie, No. 12, 50 – 61 (2008).
M. M. Krishtal, “Effect the structure of aluminum-silicon alloys on the process of formation and characteristics of oxide layer under microarc oxidizing,” Metalloved. Term. Obrab. Met., No. 9, 20 – 25 (2004).
I. V. Suminov, P. N. Belkin, A. V. Épel’feld, et al., Plasma-Electrolytic Modification of the Surface of Metals and Alloys [in Russian], Tekhnosfera (2011), Vol. 2, 512 p.
A. V. Tokarev, “Electrophysical characteristics of coatings on aluminum deposited by the method of microarc oxidizing,” Vestn. KRSU, 12(10), 106 – 110 (2012).
M. M. Krishtal, P. V. Ivashin, I. A. Rastegaev, et al., “Effect of alloying of the electrolyte with nanosize silica on the tribological characteristics of oxide layers formed on an aluminum-silicon alloy by microarc oxidizing,” Vektor Nauki TGU, No. 1, 48 – 52 (2014).
A. V. Polunin, P. V. Ivashin, I. A. Rastegaev e al., “A study of the wear resistance of oxide layers formed on silumin AK9PCh by microarc oxidizing in an electrolyte modified with silica nanoparticles,” Deform. Razrush. Mater., No. 2, 21 – 25 (2015).
M. M. Krishtal, P. V. Ivashin, D. A. Pavlov, and A. V. Polunin, “About the heat conduction of oxide coatings deposited by the method of microarc oxidizing on silumin AK9PCh,” Vektor Nauki TGU, No. 4(22), 169 – 172 (2012).
V. Dehnavi, B. Luan, D. Shoesmith, et al., “Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior,” Surf. Coat. Technol., 226, 100 – 107 (2013).
F. Monfori, A. Berkani, E. Matykina, et al., “Development of anodic coatings on aluminum under sparking conditions in silicate electrolyte,” Corros. Sci., 49(2)[672], 672 – 693 (2007).
F. Monfori, E. Matykina, A. Berkani, et al., “Species separation during coating growth on aluminum by spark anodizing,” Surf. Coat. Technol., 201(21), 8671 – 8676 (2007).
K. Wang, Joo Kim Young, Hayashi Yasunori, et al., “Ceramic coatings on 6061 Al alloys by plasma electrolytic oxidation under different AC voltages,” J. Ceram. Proc. Res., 10(4), 562 – 566 (2009).
A. N. Bolotov, D. A. Zorenko, and V. V. Novikov, A Method for Electrolytic Deposition of Antifriction Coating on Aluminum and Its Alloys, RF Patent 2220233 [in Russian].
F. Jin, P. K. Chu, H. Tong, and J. Zhao, “Improvement of surface porosity and properties of alumina films by incorporation of Fe micrograins in micro-arc oxidation,” Appl. Surf. Sci., 253, 863 – 868 (2006).
E. Matykina, R. Arrabal, P. Skeldon, and G. E. Thompson, “Incorporation of zirconia nanoparticles into coatings formed on aluminum by AC plasma electrolytic oxidation,” J. Appl. Electrochem., 38(10), 1375 – 1383 (2008).
V. Ya. Rudyak, A. A. Belkin, and E. A. Tomilina, “The force acting on a nanoparticle in liquid,” Pis’ma Zh. Teor. Fiz., 34(2), 69 – 74 (2008).
Yu. N. Kul’chin, O. B. Vitrik, V. P. Dzyuba, and N. P. Kraeva, “Relaxation of the speed of nonequilibrium nanoparticles in liquid,” Pis’ma Zh. Teor. Fiz., 37(12), 58 – 66 (2011).
Yu. V. Martynenko, M. Yu. Nagel, and M. A. Orlov, “Nanoparticle in plasma,” Fizika Plazmy, 35(6), 542 – 546 (2009).
M. M. Krishtal, “A wear-resistant coating for aluminum-silicon alloys using microarc oxidation and an application to an aluminum cylinder block,” in: SAE Paper 2002-01-0626 (2002), pp. 152 – 162.
S. P. Bardakhanov, V. I. Lysenko, A. V. Nomoev, and D. Yu. Trufanov, “A ceramics for nanopowders and its properties,” Steklo Keram., No. 12, 10 – 13 (2008).
V. Swamy, K. Suxena Surendra, et al., “A thermodynamic assessment of silica phase diagram,” J. Geophys. Res.: Solid Earth (1978 – 2012), 99(B6), 11,787 – 11,794, 10 June (1994).
G. D. Chukin, “The structure of alumina and of catalysts for hydrodesulfurization,” in: Reaction Mechanisms [in Russian], OOO “Printa,” Moscow (2010), 288 p.
S. P. Bardakhanov, A. P. Zav’yalov, K. V. Zobov, et al., “A study of electrophysical properties of nanosize powders of silica, alumina and nickel,” Vestn. NGU, Ser. Fiz., 4(1), 75 – 79 (2009).
The work has been performed with support of State Research Engineering Assignment (Project 887).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 62 – 69, July, 2015.
Rights and permissions
About this article
Cite this article
Krishtal, M.M., Ivashin, P.V., Yasnikov, I.S. et al. Effect of Nanosize SiO2 Particles Added into Electrolyte on the Composition and Morphology of Oxide Layers Formed in Alloy AK6M2 Under Microarc Oxidizing. Met Sci Heat Treat 57, 428–435 (2015). https://doi.org/10.1007/s11041-015-9900-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-015-9900-8