Abstract
Zinc oxide (ZnO) nanostructures with various morphologies (pencil-like nanorods, nanotubes, and lotus-like structures) have been successfully formed by simple oxidation of vacuum deposited Zn thin film on glass/ITO substrates in hot water at 90 °C. The morphology evolved from pencil-like nanorods to nanotubes to lotus-like structures with prolonged oxidation of Zn thin film for 6–24 h. The change in morphology of ZnO is attributed to the combined effects of electrochemical reactions in the solution, morphology and structure of Zn thin film, and wurtzite structure of resulting ZnO. A hybrid organic–inorganic solar cell following an inverted bulk heterojunction configuration was fabricated based on the lotus-like ZnO structures. The solar cell achieved a power conversion efficiency of up to 1.18%, which demonstrates the applicability of the technique for photovoltaic applications.
Similar content being viewed by others
References
Arshad, M.: Band gap engineering and enhanced photoluminescence of Mg doped ZnO nanoparticles synthesized by wet chemical route. J. Lumin. 161, 275–280 (2015)
Balela, M.D.L.: In situ mixed potential study of the growth of zinc oxide hierarchical nanostructures by wet oxidation of zinc foil. J. Mater. Sci. 52, 2319–2328 (2017)
Cao, G.: Fast growth of well-aligned ZnO nanowire arrays by a microwave heating method and their photocatalytic properties. Nanotechnology 27, 435402 (2016). doi:10.1088/0957-4484/27/43/435402
Damasco-Ty, J.T., Yanagi, H.: Electrochemical deposition of zinc oxide nanorods for hybrid solar cells. Jpn. J. Appl. Phys. 54, 04DK05 (2015). doi:10.7567/JJAP.54.04DK05
Fan, F.: Facile synthesis and gas sensing properties of tubular hierarchical ZnO self-assembled porous nanosheets. Sens. Actuators, B 215, 231–240 (2015)
Gu, C.: Preparation of porous flower-like ZnO nanostructures and their gas-sensing property. J. Alloy. Compd. 509, 4499–4504 (2011)
Huang, J.: Facile synthesis of porous ZnO nanowires consisting of ordered nanocrystallites and their enhanced gas-sensing property. Sens. Actuators, B 188, 249–256 (2013)
Huang, Y.: Fabrication and characterization of ZnO comb-like nanostructures. Ceram. Int. 32, 561–566 (2006)
Huang, Y.: Low-temperature and two-step evaporation growth of ZnO nanotetrapods and their field emission properties. Mater. Lett. 62, 1342–1344 (2008)
Liu, W.C., Cai, W.: Synthesis and characterization of ZnO nanorings with ZnO nanowires array aligned at the inner surface without catalyst. J. Cryst. Growth 310, 843–846 (2008)
Liu, Y., Gao, W.: Growth process, crystal size and alignment of ZnO nanorods synthesized under neutral and acid conditions. J. Alloy. Compd. 629, 84–91 (2015)
Park, J.Y.: Formation of networked ZnO nanowires by vapor phase growth and their sensing properties with respect to CO. Mater. Lett. 65, 2755–2757 (2011)
Pelicano, C.M.: Zinc oxide nanostructures formed by wet oxidation of zinc foil. Adv. Mater. Res. 1043, 22–26 (2014)
Qu, X.: Preparation and optical property of porous ZnO nanobelts. Mater. Sci. Semicond. Process. 15, 244–250 (2012)
Roza, L.: Direct growth of oriented ZnO nanotubes by self-selective etching at lower temperature for photo-electrochemical (PEC) solar cell application. J. Alloy. Compd. 618, 153–158 (2015)
Ruankham, P.: Surface modification of ZnO nanorods with small organic molecular dyes for polymer-inorganic hybrid solar cells. J. Phys. Chem. C 115, 23809–23816 (2011)
Skeerantan, S.: Room temperature anodic deposition and shape control of one-dimensional nanostructured zinc oxide. J. Alloys Comp. 476, 513–518 (2011)
Tan, W.K.: Formation of highly crystallized ZnO nanostructures by hot-water treatment of etched Zn foils. Mater. Lett. 91, 111–114 (2013a)
Tan, W.K.: Optical properties of two-dimensional ZnO nanosheets formed by hot-water treatment of Zn foils. Solid State Commun. 162, 43–47 (2013b)
Tan, W.K.: Synthesis of ZnO nanorod-nanosheet composite via facile hydrothermal method and their photocatalytic activities under visible light irradiation. J. Solid State Chem. 211, 146–153 (2014)
Vayssieres, L.: Three-dimensional array of highly oriented crystalline ZnO microtubes. Chem. Mater. 13, 4395–4398 (2001)
Wright, M., Uddin, A.: Organic–inorganic hybrid solar cells: a comparative review. Solar Energy Mater. Solar Cell. 107, 87–111 (2012)
Xi, Y.: Growth of ZnO nanotube-array and nanotube based piezoelectric generators. J. Mater. Chem. 19, 9260–9264 (2009)
Yagi, S.: Local pH control by electrolysis for ZnO epitaxial deposition on a Pt cathode. Electrochim. Acta 62, 348–353 (2012)
Acknowledgement
This study was funded by the Department of Science and Technology under the Engineering Research and Development for Technology and the College of Engineering, University of the Philippines under the Faculty Research Incentive Award and Green Photonics Project of Nara Institute of Science and Technology.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
This article is part of the Topical Collection on Photonic Science and Engineering on the Micro/Nano Scale.
Guest edited by Yen-Hsun Su, Lei Liu, Yiting Yu and Yikun Liu.
Rights and permissions
About this article
Cite this article
Balela, M.D.L., Pelicano, C.M.O., Ty, J.D. et al. Formation of zinc oxide nanostructures by wet oxidation of vacuum deposited Zn thin film. Opt Quant Electron 49, 3 (2017). https://doi.org/10.1007/s11082-016-0834-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11082-016-0834-1