Abstract
Based on control theory, adjoint system for the general problem of turbomachinery aerodynamic optimization was studied and developed in the present paper by using the variation technique in the grid node coordinates combined with Jacobian Matrics of flow fluxes. Then the adjoint system for aerodynamic design optimization of turbine cascade governed by compressible Navier-Stokes equations was derived in detail. With the purpose of saving computation resources, the mathematic method presented in this paper avoids the coordinate system transforming in the traditional derivation process of the adjoint system and makes the adjoint system much more sententious. Given the general expression of objective functions consisting of both boundary integral and field integral, the adjoint equations and their boundary conditions were derived, and the final expression of the objective function gradient including only boundary integrals was formulated to reduce the CPU cost, especially for the complex 3D configurations. The adjoint system was solved numerically by using the finite volume method with an explicit 5-step Runge-Kutta scheme and Riemann approximate solution of Roe’s scheme combined with multi-grid technique and local time step to accelerate the convergence procedure. Finally, based on the aerodynamic optimization theory in the present work, 2D and 3D inviscid and viscous inverse design programs of axial turbomachinery cascade for both pressure distribution and isentropic Mach number distribution on the blade wall were developed, and several design optimization cases were performed successfully to demonstrate the ability and economy of the present optimization system.
Similar content being viewed by others
References
Song L M, Feng Z P, Li J. Shape optimization of turbine stage using adaptive range differential evolution and three-dimensional Navier-Stokes solver. ASME Paper, GT 2005-68280, 2005
Pierret S, Van den Braembussche R A. Turbomachinery blade design using a Navier-Stock solver and artificial neural network. ASME J Turbomachinery, 1999, 121: 326–332
Ahn C S, Kim K Y. Aerodynamic design optimization of a compressor rotor with Navier-Stocks analysis. Proc IMechE, Part A: J Power Energy, 2003, 217(2): 179–183
Pironneau O. On optimum shapes in Stokes flow. J Fluid Mech, 1973, 59(2): 117–128
Jameson A. Aerodynamic design via control theory. J Sci Comput, 1988, 3: 233–260
Jameson A, Pierce N A, Martinelli L. Optimum aerodynamic design using the Navier-Stokes equations. 35th AIAA Aerospace Sciences Meeting & Exhibit, Reno, 1997
Reuther J, Jameson A, Farmer J, et al. Aerodynamic shape optimization of complex aircraft configurations via an adjoint formulation. AIAA Paper 96-0094, 1996
Elliott J, Peraire J. 3D aerodynamic optimization on unstructured meshes with viscous effects. AIAA Paper 97-1849, 1997
Qiao Z D, Qin X L, Yang X D. Wing design by solving adjoint equations. AIAA Paper, AIAA-2002-0263, 2002
Tang Z L. The research on optimum aerodynamic design using CFD and control theory (in Chinese). Dorctoral Dissertation, Nanjing: Nanjing University of Aeronautics and Astronautics, 2000
Yang S, Wu H, Liu F. Aerodynamic design of cascades by using an adjoint equation method. AIAA Paper, AIAA-2003-1068, 2003
Wu H, Yang S, Liu F. Comparison of three geometric representation of airfoils for aerodynamic optimization. AIAA Paper, AIAA-2003-4095, 2003
Wu H, Liu F, Tsai H. Aerodynamic design of turbine blades using an adjoint equation method. AIAA Paper, AIAA-2005-1006, 2005
Papadimitriou D I, Giannakoglou K C. Compressor blade optimization using a continuous adjoint formulation. ASME Paper, GT 2006-90466, 2006
Papadimitriou D I, Giannakoglou K C. A continuous adjoint method with objective function derivatives based on boundary integrals for inviscid and viscous flows. Computers and Fluids, 2007, 36: 325–341
Papadimitriou D I, Giannakoglou K C. Aerodynamic shape optimization using first and second order adjoint and direct approaches. Arch Comput Methods Eng, 2008, 15: 447–488
Wang D X, He L. Adjoint aerodynamic design optimization for blades in multi-stage turbomachines: Part I — methodology and verification. ASME Paper, GT 2008-50208, 2008
Wang D X, He L. Concurrent aerodynamic-aeromechanic design optimization for turbomachinery blades using adjoint method. ASME Paper, GT 2009-59240, 2009
Li Y C, Yang D L, Feng Z P. Inverse problem in aerodynamic shape design of turbomachinery blades. ASME Paper, GT 2006-91135, 2006
Li Y C, Feng Z P. Aerodynamic design of turbine blades by using adjoint-based method and N-S equation. ASME Paper, GT 2007-27734, 2007
Li Y C, Yang D L, Gao Z M, et al. Inverse problem in turbomachinery cascade. J Eng Thermophys, 2007, 28(1): 33–36
Li Y C, Feng Z P. Control theroy method for aerodynamic inverse problem of 3D vicous turbine blades. J Eng Thermophys, 2007, 28(4): 580–582
Li Y C, Feng Z P. Three-dimensional aerodynamic design of turbine blades using the adjoint method. ASME Paper, GT 2008-51225, 2008
Li Y C, Feng Z P. Aerodynamic inverse design of cascade using control theory. J Eng Thermophys, 2008, 29(5): 755–758
Li H T, Song L M, Li Y C, et al. 2D aerodynamic optimization algorithm for turbine blades based on control theory and N-S equation. J Eng Thermophys, 2009, 30(12): 2021–2024
Li H T, Song L M, Feng Z P. Aerodynamic design optimization with constraints for turbomachinery based on control theory. J Eng Thermophys, 2010, 31(8): 1294–1298
Li H T, Song L M, Li Y C, et al. 2D viscous aerodynamic shape design optimization for turbine blades based on adjoint method. ASME Paper, GT 2009-59999, 2009; also ASME J Turbomachinery, 2011, 133 (3): 031014
Blazek, J. Computational Fluid Dynamics: Principles and Applications. 1st ed. Kidlington, Oxford: Elsevier, 2001
Li Y C. Study on aerodynamic inverse design of axial cascades based on control theory (in Chinese). Dorctoral Dissertation, Xi’an: Xi’an Jiaotong University, 2008
Li H T, Song L M, Zhang P F, et al. Inverse problem for isentropic Mach-number on blade wall in aerodynamic shape design of turbomachinery cascades by using adjoing method. ASME Pager, GT 2011-45808, 2011
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Feng, Z., Li, H., Song, L. et al. Aerodynamic inverse design optimization for turbine cascades based on control theory. Sci. China Technol. Sci. 56, 308–323 (2013). https://doi.org/10.1007/s11431-012-5099-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-012-5099-8