Abstract
Liquid metal embrittlement (LME) is the term for a collection of phenomena by which the action of a liquid metal in contact with the surface of a solid metal results in the weakening, loss of ductility, or otherwise mechanical degradation of the solid metal. Despite upwards of 100 years of study on this topic (Johnson, Proc R Soc Lond 23(156–163):168–179, 1874 https://doi.org/10.1098/rspl.1874.0024), the ability to predict the occurrence or severity of embrittlement in any given liquid–solid metal pair has eluded the community, in no small part due to the lack of an agreed upon mechanism or mechanisms that explain the observed phenomenology. This review will describe the various ways in which metals can fail by LME, the experimentally observed dependencies on environmental and metallurgical factors (Section III), and will briefly cover the various mechanisms that have been proposed to explain behavior.
Similar content being viewed by others
References
W.H. Johnson: Proc. R. Soc. Lond., 1874, vol. 23(156–163): 168–79 https://doi.org/10.1098/rspl.1874.0024.
J. H. S. Dickenson: Journal of the Institute of Metals, 1920, vol. 23: 315.
J. H. Miller: Journal of the Institute of Metals, 1927, vol. 24: 183.
G.R: J. Inst. Metals, 1927, vol. 37(1), 215.
V.M. Zalkin: 1961, pp. 514–19.
B.A. Pint, J.L. Moser, and P.F. Tortorelli: Fusion Eng. Design, (2006), vol. 81(8-14 PART B): 901–08.
G. Coen, J. Van den Bosch, A. Almazouzi, and J. Degrieck: J. Nucl. Mater., (2010), vol. 398(1-3): 122–28, https://doi.org/10.1016/j.jnucmat.2009.10.021.
D. R. Lesuer, J. B. Bergin, S. A. McInturff, and B. A. Kuhn: Microstructural Science, 1981, vol. 9: 256.
J. S. Huang and G. F. Gallegos: Metallurgical Transactions A, 1990, vol. 21(July): 1959–1967.
S.P. Lynch, Stress corrosion cracking: Theory and practice 714–748 (2011)
V. Nandi, R. R. Bhat, I. N. Yatisha, and S. V. Suresh: Journal of Failure Analysis and Prevention, 2012, vol. 12(4): 348–353.
J. G. Ball: Chem. Eng., (1976), p. 275.
E.F. Analysis, S.P. Lynch, B. Hole, and T. Pasang: (1995), vol. 2(4), 257–73.
D. W. Cameron: Materials Characterization, 1994, vol. 33(1): 37–43.
A.H. Cottrell and P.R. Swann: Chem. Eng., (1976), p. 266.
H. S. Rawdon: ASTM Proceedings, 1918, vol. 18: 189–218.
A. P. Reynolds and G. E. Stoner: Metallurgical Transactions A, 1991, vol. 22(8): 1849–1855.
S. P. Lynch: Scripta Metallurgica, 1979, vol. 13: 1051–1056.
M. H. Kamdar and A. R. C. Westwood: Acta Metallurgica, 1968, vol. 16(November): 1335–1342.
C.M. Preece and A.R.C. Westwood: in P.L. Pratt (ed.), Proceedings of the 2nd International Conference on Fracture, Chapman and Hall, London, (1969) p. 439.
W. Rostoker, J. McCaughey, and H. Markus: Embrittlement by Liquid Metals, Reinhold Publishing Corporation, New York, 1960.
S. P. Lynch: Mater. Sci. Eng., 1985, vol. 72(2): 33–37.
J. Luo: Corrosion, 2016, vol. 72(7): 897–910.
K. Ina and H. Koizumi: Mater. Sci. Eng. A, (2004), vol. 387-389(1-2 SPEC. ISS.), 390–94.
J. E. Norkett and V. M. Miller: Jom, 2020, vol. 72(2): 860–867.
R. H. Hiltz: in J. E. Draley and J. R. Weeks (eds.), Corrosion by Liquid Metals: Proceedings of the Sessions on Corrosion by Liquid Metals, Springer US, Boston, MA (1970).
A. Heinzel, A. Weisenburger, and G. Müller: J. Nucl. Mater., (2014), vol. 448(1-3).
J. B. Bessone: Corrosion Science, 2006, vol. 48(12): 4243–4256.
C. F. Old and P. Trevena: Metal Science, 1981, vol. 15: 281.
A. Thorley, C. Tyzack, Alkali Metal Coolants 97–118 (1966)
F. a. Shunk and W. R. Warke: Scripta Metallurgica, (1974), vol. 8: 519–26.
M. H. Kamdar and A. R. C. Westwood: Philosophical Magazine, (1967), vol. 15(135): 641–45.
F. P. Yanchishin: Fiziko-Khimicheskaya Mekhanika Materialov, 1979, vol. 14(4): 36–42.
H. W. Hayden and S. Floreen: Philosophical Magazine, (1969), vol. 20(163): 135–45.
G.N. Vigilante, E. Troiano, C. Mossey, Liquid Metal Embrittlement of ASTM A723 Gun Steel by Indium and Gallium (Tech. rep, US Army Armament Research, Development and Engineering Center), (1999).
S. Hémery, T. Auger, J. L. Courouau, and F. Balbaud-Célérier: Corrosion Science, 2014, vol. 83: 1–5.
I. H. Dmukhovs’ka: Materials Science, 1994, vol. 29(6): 596–599.
O. Wouters and J. T. M. De Hosson: Mater. Sci. Eng. A, (2003).
I. Proriol Serre and J. B. Vogt: J. Nucl. Mater., (2020).
M. G. Nicholas and C. F. Old: J. Mater. Sci., (1979), vol. 14(1): 1–18.
C. M. Preece and A. R. C. Westwood: Transactions of the ASM, 1969, vol. 62: 418.
H. Ichinose and C. Oouchi: Trans. Jpn. Inst. Metals, 1969, vol. 10: 178.
H. Ichinose and C. Oouchi: Trans. Jpn. Inst. Metals, 1968, vol. 9: 41.
R. Rosenberg, I. Cadoff, in Fracture of Solids. ed. by D.C. Drucker, J.J. Gilman (Interscience, New York, 1963), p. 607
J. P. Hilditch, J. R. Hurley, P. Skeldon, and D. R. Tice: Corrosion Science, 1995, vol. 37(3): 445–454.
C. E. Price and R. S. Fredell: Metallurgical Transactions A, 1986, vol. 17(MAY): 889–898.
C. F. Old and P. Trevena: Embrittlement of zinc by liquid metals, (1979).
P. Skeldon, J. P. Hilditch, J. R. Hurley, and D. R. Tice: Corrosion Science, 1994, vol. 36(4): 593–610.
V. Popovich: Fiziko-Khimicheskaya Mekhanika Materialov, 1981, vol. 17(5): 9–13.
M. M. Shea and N. S. Stoloff: Mater. Sci. Eng., 1973, vol. 12: 245–253.
O. Hamdane, J. Bouquerel, I. Proriol-Serre, and J. B. Vogt: J. Mater. Process. Technol., (2011), vol. 211(12): 2085–90.
D. Sapundjiev, S. Van Dyck, and W. Bogaerts: Corrosion Science, 2006, vol. 48(3): 577–594.
B. Straumal, W. Gust, and D. Molodov: Journal of Phase Equilibria, 1994, vol. 15(4): 386–391.
B. B. Straumal, B. S. Bokshtein, A. B. Straumal, and A. L. Petelin: JETP Lett., (2008), vol. 88(8): 537–42.
K. Wolski, V. Laporte, N. Marié, and M. Biscondi: Interface Sci., 2001, vol. 9(3-4): 183–189.
P. Wynblatt and D. Chatain: Mater. Sci. Eng. A, 2008, vol. 495(1-2): 119–125.
K. Wolski and V. Laporte: Mater. Sci. Eng. A, 2008, vol. 495(1-2): 138–146.
V. V. Popovich, I. G. Shtykalo, M. I. Chaevsldi, and F.-k. M. Materialov: Fiziko-Khimicheskaya Mekhanika Materialov, 1967, vol. 3(2): 127–133.
P. J. Fernandes and D. R. Jones: Engineering Failure Analysis, 1996, vol. 3(4): 299–302.
C. Ye, J. B. Vogt, and I. Proriol Serre: Mater. Sci. Eng. A, 2014, vol. 608: 242–48.
M. Henthorne: Corrosion, 2016, vol. 72(12): 1488–1518.
H. G. Suzuki: ISIJ International, 1997, vol. 37(3): 250–254.
G. Edmunds, E. A. Anderson, and R. K. Waring: in Symposium on Stress-Corrosion Cracking, ASTM-AIME, (1944) p. 7.
H. Ichinose: Trans. Jpn. Inst. Metals, 1966, vol. 7: 7–9.
N. I. Flegontova, B. D. Summ, and Y. V. Goryunova: Fiz. Metal. Metalloved., 1964, vol. 18(5): 724–29.
H. Ichinose: Transactions of the ASM, 1968, vol. 9: 35.
I. Dmukhovskaya and V. Popovich: Fiziko-Khimicheskaya Mekhanika Materialov, 1980, vol. 16(4): 42–46.
R. J. H. Wanhill: Corrosion, (1974), vol. 30(10): 371.
T. Mae and S. Hori: Embrittlement of Aluminum by Liquid Gallium, (1984).
H.-S. Nam and D. J. Srolovitz: Acta Materialia, (2009), vol. 57(5): 1546–53.
W. A. Morgan: Ph.D Thesis, Ph.D. thesis, Cambridge University, (1954).
C. F. Old and P. Trevena: Metal Sci. J., (1979), vol. 13(10): 591.
W. D. Robertson: J. Metals, (1951), p. 1190.
P. C. Hancock and M. B. Ives: Canadian Metallurgical Quarterly, 1971, vol. 10(3): 207–211.
M. Watkins, K. L. Johnson, and N. N. Breyer: in Fourth Interamerican Conference on Materials Technology, (1975) .
H. Nichols and W. Rostoker: Transactions of the ASM, 1963, vol. 56: 494.
H. Nichols and W. Rostoker: Trans. Metall. Soci. AIME, (1964), vol. 230.
S. K. Marya and G. Wyon: Scripta Metallurgica, 1975, vol. 9: 1009.
M. Naderi, M. Peterlechner, E. Schafler, S. V. Divinski, and G. Wilde: Acta Materialia, 2015, vol. 99: 196–205.
Y. Kurata: J. Nucl. Mater., (2014), vol. 448(1-3).
G. N. Vigilante, S. Bartolucci, J. Izzo, M. Witherell, and S. B. Smith: Materials and Manufacturing Processes, 2012, vol. 27(8): 835–839.
M. I. Chaevskii, I. M. Toropovskaya, V. V. Popovich, and A. M. Datsishin: Soviet Materials Science, 1972, vol. 5(6): 580–585.
W. Matthews, S.J. Savage, Welding Research Supplement 174–82 (1971)
E. F. Nippes and D. J. Ball: pp. 0–6.
C. Heiple, W. Bennett, and T. Rising: Mater. Sci. Eng., 1982, vol. 52(3): 277–289.
D. Bhattacharya, L. Cho, H. Ghassemi-armaki, E. V. D. Aa, A. Pichler, K. O. Findley, and J. G. Speer: in Sheet Metal Welding Conference XVIII, Livonia, MI, October, 2018 pp. 1–10.
P. J. L. Fernandes and D. R. H. Jones: International Materials Reviews, (1997), vol. 42(6): 251–61.
M. G. Nicholas and P. J. Fernback: J. Mater. Sci., 1991, vol. 26(15): 4008–4021.
B. D. Summ, L. V. Ivanova, and Y. V. Goryunova: Fiziko-Khimicheskaya Mekhanika Materialov, 1965, vol. 1(6): 648–53.
M. M. Chaevskii and V. V. Popovich: Fiziko-Khimicheskaya Mekhanika Materialov, 1966, vol. 2(2): 143–148.
M. I. Chaevskii, V. F. Shatinskii, and V. V. Popovich: Soviet Materials Science, 1966, vol. 1(6): 445–448.
M. I. Chaevskii: Fiziko-Khimicheskaya Mekhanika Materialov, 1965, vol. 1(3): 344–349.
E. M. Lyutii, V. V. Shirovkov, and V. I. Stephanishin: Fiziko-Khimicheskaya Mekhanika Materialov, 1991, vol. 27(2): 52–57.
Q. Shi, J. Liu, H. Luan, Z. Yang, W. Wang, W. Yan, Y. Shan, and K. Yang: J. Nucl. Mater., (2015), vol. 457.
M. Yurechko, C. Schroer, A. Skrypnik, O. Wedemeyer, V. Tsisar, and J. Konys: J. Nucl. Mater., (2018), pp. 1–17, https://doi.org/10.1016/j.jnucmat.2018.09.056.
I. Proriol Serre, J.-B. Vogt, and N. Nuns: Appl. Surf. Sci., (2019), vol. 471(October 2018): 36–42.
W. R. Warke and N. N. Breyer: J. Iron Steel Inst., (1971), vol. 209(10): 779.
S. Dinda and W. R. Warke: Mater. Sci. Eng., 1976, vol. 24(2): 199–208.
D. Webster: Metallurgical Transactions A, 1987, vol. 18(12): 2181–2193.
L. Allegra, R. G. Hart, and H. E. Townsend: Metallurgical Transactions A, 1983, vol. 14(2): 401–411.
M. J. Kelley and N. S. Stoloff: Metallurgical Transactions A, 1975, vol. 6(1): 159–166.
R. Stumpf and P. J. Feibelman: Phys. Rev. B, 1996, vol. 54(7): 5145–5150.
M. Rajagopalan, M. A. Bhatia, K. N. Solanki, and M. A. Tschopp: in TMS Annual Meeting, (2014) .
A. Legris, G. Nicaise, J. B. Vogt, and J. Foct: J. Nucl. Mater., 2002, vol. 301(1): 70–76.
N. S. Stoloff and T. L. Johnston: Acta Metallurgica, (1963), vol. 11(4): 251–56.
F. N. Rhines, J. A. Alexander, and W. F. Barclay: Transactions of the ASM, 1962, vol. 55: 22.
M. H. Kamdar: Embrittlement by liquid metals, Tech. rep., U. S. Army Research Office, Durham, (1972).
S. P. Lynch: The Mechanism of Liquid-Metal Embrittlement-Crack Growth in Aluminum Single Crystals and Other Metals in Liquid-Metal Environments, Tech. rep., Departent of Defense Defense Science and Technology Organization Autonautical Research Laboratories, Melborne Victoria Austrailia, (1977).
I. H. Lin and R. Thomson: Scripta Metallurgica, 1983, vol. 17: 1035–37.
S. P. Lynch: Mechanisms of Liquid-Metal Embrittlement and Stress-Corrosion Cracking in High-Strength Aluminum Alloys and Other Materials.
R. M. Latanision: in O. F. Devereux, A. J. McEvily, and R. W. Stachle (eds.), Corrosion Fatigue ; Chemistry, Mechanics , and Microstructure, Univ. of Connecticut , Publ. NACE, p. 185, (1971).
R. L. Fleischer: Acta metallurgica, 1960, vol. 8: 598–604.
T. P. Slavin and N. S. Stoloff: Mater. Sci. Eng., 1984, vol. 68(1): 55–71.
W. M. Robertson: Trans. Metall. Soc. AIME, 1966, vol. 236(10): (1478).
E. E. Glickman: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2011, vol. 42(2): 250–266.
H. H. Johnson and P. C. Paris: Engineering Fracture Mechanics, 1968, vol. 1(1): 3–45.
E. E. Glickman: Interface Science, 2003, vol. 11(4): 451–59.
H. S. Nam and D. J. Srolovitz: Physical Review Letters, 2007, vol. 99(2): 1–4.
J. Luo, H. Cheng, K. M. Asl, C. J. Kiely, and M. P. Harmer: Science, 2011, vol. 333(6050): 1730–33.
H. J. Vogel and L. Ratke: Acta metallurgica et materialia, 1991, vol. 39(4): 641–649.
V. E. Scheil and K. E. Schiessl: Zeitschrift Fur Naturforschung A, (1949), vol. 4a: 524–26.
R. F. Cheney, F. G. Hochgraf, and C. W. Spencer: Trans. Metall. Soc. AIME, 1961, vol. 221: 492–498.
C. Elbaum: Trans. Metall. Soc. AIME, 1959, vol. 215(3): 476–478.
R. C. Hugo and R. G. Hoagland: Scripta Materialia, 1998, vol. 38(3): 523–529.
H. S. Nam and D. J. Srolovitz: Phys. Rev. B, 2007, vol. 76(18): 1–14.
W. D. Kaplan, D. Chatain, P. Wynblatt, and W. C. Carter: J. Mater. Sci., 2013, vol. 48(17): 5681–17.
P. R. Cantwell, M. Tang, S. J. Dillon, J. Luo, G. S. Rohrer, and M. P. Harmer: Acta Materialia, (2014), vol. 62(1).
M. A. Gibson and C. A. Schuh: Scripta Materialia, 2016, vol. 113: 55–58.
P. Lejček, M. Šob, and V. Paidar: Progress in Materials Science, 2017, vol. 87: 83–139.
S. B. Kadambi, F. Abdeljawad, and S. Patala: Comput. Mater. Sci., (2020), vol. 175(January): 109533.
D. G. Kolman: Corrosion, 2019, vol. 75(1): 42–57.
W. Ding, Z. Jiang, M. Zheng, M. Jiang, and J. Xin: J. Nucl. Mater., (2018), vol. 509: 212–17.
S. Hemery, C. Berdin, T. Auger, and M. Bourhi: J. Nucl. Mater., (2016).
K. Yun and H. S. Nam: Mater. Trans., (2014).
Y. Xu, Y. Zhang, X. Li, W. Liu, D. Li, C. S. Liu, B. C. Pan, and Z. Wang: Corrosion Sci., (2017).
E.E. Glickman, B.S. Bokshtein, J. Philibert, L. Klinger, B.B. Straumal, W. Lojkowski, V. Belousov, D. Gupta, J. Bernardini, Defect and Diffusion Forum 156, 265–72 (1998)
Acknowledgments
This work is supported by the National Science Foundation Award Number DMR-2011166.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted July 8, 2020, accepted March 17, 2021.
Rights and permissions
About this article
Cite this article
Norkett, J.E., Dickey, M.D. & Miller, V.M. A Review of Liquid Metal Embrittlement: Cracking Open the Disparate Mechanisms. Metall Mater Trans A 52, 2158–2172 (2021). https://doi.org/10.1007/s11661-021-06256-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-021-06256-y