Abstract
Variable curvature friction pendulum bearings (VCFPB) effectively reduce the dynamic response of storage tanks induced by earthquakes. Shaking table testing is used to assess the seismic performance of VCFPB isolated storage tanks. However, the vertical pressure and friction coefficient of the scaled VCFPB in the shaking table tests cannot match the equivalent values of these parameters in the prototype. To avoid this drawback, a real-time hybrid simulation (RTHS) test was developed. Using RTHS testing, a 1/8 scaled tank isolated by VCFPB was tested. The experimental results showed that the displacement dynamic magnification factor of VCFPB, peak reduction factors of the acceleration, shear force, and overturning moment at bottom of the tank, were negative exponential functions of the ratio of peak ground acceleration (PGA) and friction coefficient. The peak reduction factors of displacement, acceleration, force and overturning moment, which were obtained from the experimental results, are compared with those calculated by the Housner model. It can be concluded that the Housner model is applicable in estimation of the acceleration, shear force, and overturning moment of liquid storage tank, but not for the sliding displacement of VCFPBs.
Similar content being viewed by others
References
Castaldo P, Amendola G and Ripani M (2018), “Seismic Fragility of Structures Isolated by Single Concave Sliding Devices for Different Soil Conditions,” Earthquake Engineering and Engineering Vibration, 17(4): 869–891.
Chalhoub MS and Kelly JM (1990), “Shake Table Test of Cylindrical Water Tanks in Base-Isolated Structures,” Journal of Engineering Mechanics, 116(7): 1451–1472.
Chen PC, Hsu SC, Zhong YJ and Wang SJ (2019), “Real-Time Hybrid Simulation of Smart Base-Isolated Raised Floor Systems for High-Tech Industry,” Smart Structures and Systems, 23(1): 91–106.
Hao L, Zhang R and Weng D (2016), “Mitigation of Liquid Sloshing in Storage Tanks by Using a Hybrid Control Method,” Soil Dynamics and Earthquake Engineering, 90: 183–195.
Haroun MA (1983), “Vibration Studies and Tests of Liquid Storage Tanks,” Earthquake Engineering and Structural Dynamics, 11(1): 179–206.
Haroun MA (1992), “Parametric Study of Seismic Soil-Tank Interaction. I: Horizontal Excitation,” Journal of Structural Engineering, 118(3): 783–797.
Haroun MA and Ellaithy HM (1985), “Model for Flexible Tanks Undergoing Rocking,” Journal of Engineering Mechanics, 111(1): 143–157.
Hong Yue, Tang Zhenyun, He Tao, et al. (2017), “The Implementation of Nonlinear Real-Time Dynamics Substructuring for Large Scale Specimen,” Journal of Vibration Engineering, 30(6): 913–920. (in Chinese)
Housner GW (1957), “Dynamic Pressure on Accelerated Fluid Containers”, Bulletin of Seismological Society of America, 47(1): 15–35.
Jadhav MB and Jangid RS (2006), “Response of Base-Isolated Liquid Storage Tanks to Near-Fault Motions,” Structural Engineering and Mechanics, 23(6): 615–634.
Joaquín Martí, María Crespo and Francisco Martínez (2010), “Seismic Isolation of Liquefied Natural Gas Tanks: A Comparative Assessment,” Seismic Isolation and Protective Systems, 1(1): 125–140.
Kim NS and Lee DG (1995), “Pseudo Dynamic Test for Evaluation of Seismic Performance of Base-Isolated Liquid Storage Tanks,” Engineering Structures, 17(3): 198–208.
Llera José (2010), “An Experimental Study of Nominally Symmetric and Asymmetric Structures Isolated with the FPS,” Earthquake Engineering & Structural Dynamics, 32(6): 891–918.
Maleki A and Ziyaeifar M (2007), “Damping Enhancement of Seismic Isolated Cylindrical Liquid Storage Tanks Using Baffles,” Engineering Structures, 29(12): 3227–3240.
Nakashima M, Kato H and Takaoka E (1992), “Development of Real-Time Pseudo Dynamic Testing,” Earthquake Engineering and Structural Dynamics, 21(1): 79–92.
Panchal VR and Jangid RS (2008), “Seismic Behavior of Variable Frequency Pendulum Isolator,” Earthquake Engineering and Engineering Vibration, 7(2): 193–205.
Panchal VR and Jangid RS (2012), “Behaviour of Liquid Storage Tanks with VCFPS Under Near-Fault Ground Motions,” Structure and Infrastructure Engineering, 8(1): 71–88.
Roussis PC and Constantinou MC (2006), “Uplift-Restraining Friction Pendulum Seismic Isolation System,” Earthquake Engineering and Structural Dynamics, 35(5): 577–593.
Seleemah AA and El-Sharkawy M (2011), “Civil Engineering Seismic Response of Base Isolated Liquid Storage Ground Tanks,” Ain Shams Engineering Journal, 2(1): 33–42.
Shrimali M and Jangid R (2002a), “A Comparative Study of Performance of Various Isolation Systems for Liquid Storage Tanks,” International Journal of Structural Stability and Dynamics, 2(4): 573–591.
Shrimali M and Jangid R (2002b), “Non-Linear Seismic Response of Base-Isolated Liquid Storage Tanks to Bi-Directional Excitation,” Nuclear Engineering & Design, 217(1): 1–20.
Shrimali M and Jangid R (2003), “Earthquake Response of Isolated Elevated Liquid Storage Steel Tanks,” Journal of Constructional Steel Research, 59(10): 1267–1288.
Xue Suduo, Shan Mingyue, Li Xiongyan, et al. (2019), “Shaking Table Test and Numerical Simulation of an Isolated Cylindrical Latticed Shell Under Multiple-Support Excitations,” Earthquake Engineering and Engineering Vibration, 18(3): 611–630.
Tang ZY, Dietz M, Hong Y, et al. (2020), “Performance Extension of Shaking Table Based Real Time Dynamic Hybrid Testing Through Full State Control via Simulation,” Structural Control and Health Monitoring, 1: 1–19.
Tsai C, Chiang T and Chen B (2003), “Finite Element Formulations and Theoretical Study for Variable Curvature Friction Pendulum System,” Engineering Structures, 25: 1719–1730.
Uras RA and Liu YK (1990), “Dynamic Buckling of Liquid-Filled Shells Under Horizontal Excitation,” Journal of Sound and Vibration, 141(3): 389–408.
Veletsos AS and Tang Yu (1987), “Rocking Response of Liquid Storage Tanks,” Journal of Engineering Mechanics, 113(11): 1774–1792.
Wang YP, Teng MC and Chung KW (2001), “Seismic Isolation of Rigid Cylindrical Tanks Using Friction Pendulum Bearings,” Earthquake Engineering and Structural Dynamics, 30: 1083–1099.
Yuan WC, Wang B and Cheung P (2012), “Seismic Performance of Cable-Sliding Friction Bearing System for Isolated Bridges,” Earthquake Engineering and Engineering Vibration, 11(2): 173–183.
Zayas V, Low S and Mahin S (1990), “A Simple Pendulum Technique for Achieving Seismic Isolation,” Earthquake Spectra, 6(2): 317–333.
Zhang R, Weng D and Ren X (2011), “Seismic Analysis of a LNG Storage Tank Isolated by a Multiple Friction Pendulum System,” Earthquake Engineering and Engineering Vibration, 10(2): 253–262.
Zhu Fei, Wang Jinting and Jin Feng (2019), “Control Performance Comparison Between Tuned Liquid Damper and Tuned Liquid Column Damper Using Real-Time Hybrid Simulation,” Earthquake Engineering and Engineering Vibration, 18(3): 695–701.
Acknowledgment
The authors gratefully acknowledge the support of the Scientific Research Fund of the Institute of Engineering Mechanics, China Earthquake Administration (Grant No. 2018D03) and the National Natural Science Foundation of China (Grant Nos. 51608016 and 51421005) in the pursuance of this work.
Funding
Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration under Grant No. 2018D03 and the National Natural Science Foundation of China under Grant Nos. 51608016 and 51421005
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yue, H., Zhenyun, T., Zhenbao, L. et al. Seismic performance evaluation of VCFPB isolated storage tank using real-time hybrid simulation. Earthq. Eng. Eng. Vib. 21, 501–515 (2022). https://doi.org/10.1007/s11803-022-2100-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11803-022-2100-9